[PATCH 3/3] PCI: designware: Move interrupt acking into the proper callback

[Marc Zyngier <marc.zyngier@arm.com>]

The write to the status register is really an ACK for the HW,
and should be treated as such by the driver. Let's move it to the
irq_ack callback, which will prevent people from moving it around
in order to paper over other bugs.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 0a76948ed49e..f06e67c60593 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -99,9 +99,6 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 					       (i * MAX_MSI_IRQS_PER_CTRL) +
 					       pos);
 			generic_handle_irq(irq);
-			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS +
-						(i * MSI_REG_CTRL_BLOCK_SIZE),
-					    4, 1 << pos);
 			pos++;
 		}
 	}
@@ -200,14 +197,18 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
 
 static void dw_pci_bottom_ack(struct irq_data *d)
 {
-	struct msi_desc *msi = irq_data_get_msi_desc(d);
-	struct pcie_port *pp;
+	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
+	unsigned int res, bit, ctrl;
 	unsigned long flags;
 
-	pp = msi_desc_to_pci_sysdata(msi);
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
 	raw_spin_lock_irqsave(&pp->lock, flags);
 
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit);
+
 	if (pp->ops->msi_irq_ack)
 		pp->ops->msi_irq_ack(d->hwirq, pp);
 
-- 
2.19.1