[PATCH AUTOSEL 4.19 022/258] x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)

[PATCH AUTOSEL 4.19 022/258] x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 53bb565fc5439f2c8c57a786feea5946804aa3e9 ]

In the expression "word1 << 16", word1 starts as u16, but is promoted to a
signed int, then sign-extended to resource_size_t, which is probably not
what was intended.  Cast to resource_size_t to avoid the sign extension.

This fixes an identical issue as fixed by commit 0b2d70764bb3 ("x86/PCI:
Fix Broadcom CNB20LE unintended sign extension") back in 2014.

Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension")

Fixes: 3f6ea84a3035 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/pci/broadcom_bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c
index 526536c81ddc..ca1e8e6dccc8 100644
--- a/arch/x86/pci/broadcom_bus.c
+++ b/arch/x86/pci/broadcom_bus.c
@@ -50,8 +50,8 @@ static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
 	word1 = read_pci_config_16(bus, slot, func, 0xc0);
 	word2 = read_pci_config_16(bus, slot, func, 0xc2);
 	if (word1 != word2) {
-		res.start = (word1 << 16) | 0x0000;
-		res.end   = (word2 << 16) | 0xffff;
+		res.start = ((resource_size_t) word1 << 16) | 0x0000;
+		res.end   = ((resource_size_t) word2 << 16) | 0xffff;
 		res.flags = IORESOURCE_MEM;
 		update_res(info, res.start, res.end, res.flags, 0);
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 145/258] switchtec: Fix SWITCHTEC_IOCTL_EVENT_IDX_ALL flags overwrite

[Sasha Levin]

From: Joey Zhang <joey.zhang@microchip.com>

[ Upstream commit e4a7dca5de625018b29417ecc39dc5037d9a5a36 ]

In the ioctl_event_ctl() SWITCHTEC_IOCTL_EVENT_IDX_ALL case, we call
event_ctl() several times with the same "ctl" struct.  Each call clobbers
ctl.flags, which leads to the problem that we may not actually enable or
disable all events as the user requested.

Preserve the event flag value with a temporary variable.

Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 54a8b30dda38..37d0c15c9eeb 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -800,6 +800,7 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
 {
 	int ret;
 	int nr_idxs;
+	unsigned int event_flags;
 	struct switchtec_ioctl_event_ctl ctl;
 
 	if (copy_from_user(&ctl, uctl, sizeof(ctl)))
@@ -821,7 +822,9 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
 		else
 			return -EINVAL;
 
+		event_flags = ctl.flags;
 		for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
+			ctl.flags = event_flags;
 			ret = event_ctl(stdev, &ctl);
 			if (ret < 0)
 				return ret;
-- 
2.19.1

[PATCH AUTOSEL 4.19 246/258] PCI: imx: Enable MSI from downstream components

[Sasha Levin]

From: Richard Zhu <hongxing.zhu@nxp.com>

[ Upstream commit 75cb8d20c112aba70f23d98e3f8d0a38ace16006 ]

The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls
whether a Function can request service using MSI.

i.MX6 Root Ports implement the MSI Capability and may use MSI to request
service for events like PME, hotplug, AER, etc.  In addition, on i.MX6, the
MSI Enable bit controls delivery of MSI interrupts from components below
the Root Port.

Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of
CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled
CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI
Enable bit so it could use PME, hotplug, AER, etc.  As a side effect, that
also enabled delivery of MSI interrupts from downstream components.

The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable
in imx6q-pcie so MSI from downstream components works even if nobody uses
MSI for the Root Port events.

Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Tested-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 975050a69494..3826b444298c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -66,6 +66,7 @@ struct imx6_pcie {
 #define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
 
 /* PCIe Root Complex registers (memory-mapped) */
+#define PCIE_RC_IMX6_MSI_CAP			0x50
 #define PCIE_RC_LCR				0x7c
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1	0x1
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2	0x2
@@ -682,6 +683,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	struct resource *dbi_base;
 	struct device_node *node = dev->of_node;
 	int ret;
+	u16 val;
 
 	imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
 	if (!imx6_pcie)
@@ -816,6 +818,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	if (pci_msi_enabled()) {
+		val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
+					PCI_MSI_FLAGS);
+		val |= PCI_MSI_FLAGS_ENABLE;
+		dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP + PCI_MSI_FLAGS,
+				   val);
+	}
+
 	return 0;
 }
 
-- 
2.19.1