From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>,
Lukas Wunner <lukas@wunner.de>,
Russell Currey <ruscur@russell.cc>,
Sam Bobroff <sbobroff@linux.ibm.com>,
Oliver O'Halloran <oohall@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Sinan Kaya <okaya@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Matthew Wilcox <willy@infradead.org>,
Frederick Lawler <fred@fredlawl.com>,
linux-kernel@vger.kernel.org
Subject: [RFC] Log PCIe service info with pci_dev, not pcie_device
Date: Fri, 8 Mar 2019 12:01:49 -0600 [thread overview]
Message-ID: <20190308180149.GD214730@google.com> (raw)
This is strictly a discussion starter, obviously not for application.
The portdrv driver binds to pci_dev for PCIe Root Ports and Switch
Ports. It creates additional pcie_devices for each "service" (Power
Management events, AER, hotplug, Downstream Port Containment, etc).
These pcie_devices have their own struct device, in addition to the
one in the struct pci_dev.
Service drivers can then bind to those pcie_devices, and their
dev_printk output is typically associated with those, e.g.,
pciehp 0000:80:10.0:pcie004: Slot #36 ...
The "pcie004" is a bitmask that identifies the particular service, but
I don't think it's very useful to users, especially since we already
have "pciehp" as the driver name.
I think the fact that pcie_device has its own struct device is
probably a design mistake and it would be better if those "services"
were more tightly integrated into the PCI core.
Changing that would be a big project that I don't want to tackle right
now, but I think a small step would be to simplify the dmesg logging
by doing it with the underlying pci_dev instead of the pcie_device.
For example, we could do something like the patch below, which would
change the dmesg output like this:
- pciehp 0000:80:10.0:pcie004: Slot #36 AttnBtn- PwrCtrl- MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
+ pcieport 0000:80:10.0: pciehp: Slot #36 AttnBtn- PwrCtrl- MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
Please discuss :)
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 7dd443aea5a5..2761778f2ecc 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -868,7 +868,7 @@ struct controller *pcie_init(struct pcie_device *dev)
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC);
- ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n",
+ pci_info(pdev, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n",
(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
next reply other threads:[~2019-03-08 18:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-08 18:01 Bjorn Helgaas [this message]
2019-03-08 18:24 ` [RFC] Log PCIe service info with pci_dev, not pcie_device Keith Busch
2019-03-11 9:50 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190308180149.GD214730@google.com \
--to=helgaas@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=fred@fredlawl.com \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mika.westerberg@linux.intel.com \
--cc=okaya@kernel.org \
--cc=oohall@gmail.com \
--cc=rafael.j.wysocki@intel.com \
--cc=ruscur@russell.cc \
--cc=sbobroff@linux.ibm.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox