public inbox for linux-pci@vger.kernel.org
 help / color / mirror / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: Jonathan Chocron <jonnyc@amazon.com>
Cc: lorenzo.pieralisi@arm.com, bhelgaas@google.com,
	jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
	robh+dt@kernel.org, mark.rutland@arm.com, dwmw@amazon.co.uk,
	benh@kernel.crashing.org, alisaidi@amazon.com, ronenk@amazon.com,
	barakw@amazon.com, talel@amazon.com, hanochu@amazon.com,
	hhhawa@amazon.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v4 4/7] PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
Date: Thu, 22 Aug 2019 08:54:10 +0100	[thread overview]
Message-ID: <20190822075409.GK23903@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <20190821153545.17635-5-jonnyc@amazon.com>

On Wed, Aug 21, 2019 at 06:35:44PM +0300, Jonathan Chocron wrote:
> The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some
> platforms it is configured to not advertise the capability at all, while
> on others it (mistakenly) does. This causes a panic during
> initialization by the pcieport driver, since it tries to configure the
> MSI-X capability. Specifically, when trying to access the MSI-X table
> a "non-existing addr" exception occurs.
> 
> Example stacktrace snippet:
> 
> [    1.632363] SError Interrupt on CPU2, code 0xbf000000 -- SError
> [    1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
> [    1.632365] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
> [    1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO)
> [    1.632366] pc : __pci_enable_msix_range+0x4e4/0x608
> [    1.632367] lr : __pci_enable_msix_range+0x498/0x608
> [    1.632367] sp : ffffff80117db700
> [    1.632368] x29: ffffff80117db700 x28: 0000000000000001
> [    1.632370] x27: 0000000000000001 x26: 0000000000000000
> [    1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000
> [    1.632373] x23: 0000000000000000 x22: 0000000000000000
> [    1.632375] x21: 0000000000000001 x20: 0000000000000000
> [    1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff
> [    1.632378] x17: 0000000000000000 x16: 0000000000000000
> [    1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503
> [    1.632380] x13: ffffffd3e9844502 x12: 0000000000000038
> [    1.632382] x11: ffffffffffffff00 x10: 0000000000000040
> [    1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268
> [    1.632385] x7 : 0000000000000002 x6 : 00000000000000b2
> [    1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000
> [    1.632388] x3 : 0000000000000000 x2 : 0000000000000000
> [    1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680
> [    1.632392] Kernel panic - not syncing: Asynchronous SError Interrupt
> [    1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
> [    1.632394] Hardware name: Annapurna Labs Alpine V3 EVP (DT)
> [    1.632394] Call trace:
> [    1.632395]  dump_backtrace+0x0/0x140
> [    1.632395]  show_stack+0x14/0x20
> [    1.632396]  dump_stack+0xa8/0xcc
> [    1.632396]  panic+0x140/0x334
> [    1.632397]  nmi_panic+0x6c/0x70
> [    1.632398]  arm64_serror_panic+0x74/0x88
> [    1.632398]  __pte_error+0x0/0x28
> [    1.632399]  el1_error+0x84/0xf8
> [    1.632400]  __pci_enable_msix_range+0x4e4/0x608
> [    1.632400]  pci_alloc_irq_vectors_affinity+0xdc/0x150
> [    1.632401]  pcie_port_device_register+0x2b8/0x4e0
> [    1.632402]  pcie_portdrv_probe+0x34/0xf0
> 
> Notice that this quirk also disables MSI (which may work, but hasn't
> been tested nor has a current use case), since currently there is no
> standard way to disable only MSI-X.
> 
> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> ---
>  drivers/pci/quirks.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 23672680dba7..b6e6e7df3f7b 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -2925,6 +2925,24 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
>  			quirk_msi_intx_disable_qca_bug);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
>  			quirk_msi_intx_disable_qca_bug);
> +
> +/*
> + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it
> + * should be disabled on platforms where the device (mistakenly) advertises it.
> + *
> + * Notice that this quirk also disables MSI (which may work, but hasn't been
> + * tested), since currently there is no standard way to disable only MSI-X.

Thanks for adding this.

Reviewed-by: Andrew Murray <andrew.murray@arm.com>


> + *
> + * The 0031 device id is reused for other non Root Port device types,
> + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
> + */
> +static void quirk_al_msi_disable(struct pci_dev *dev)
> +{
> +	dev->no_msi = 1;
> +	pci_warn(dev, "Disabling MSI/MSI-X\n");
> +}
> +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
> +			      PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);
>  #endif /* CONFIG_PCI_MSI */
>  
>  /*
> -- 
> 2.17.1
> 

  reply	other threads:[~2019-08-22  7:54 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 15:35 [PATCH v4 0/7] Amazon's Annapurna Labs DT-based PCIe host controller driver Jonathan Chocron
2019-08-21 15:35 ` [PATCH v4 1/7] PCI: Add Amazon's Annapurna Labs vendor ID Jonathan Chocron
2019-08-21 15:35 ` [PATCH v4 2/7] PCI: Add ACS quirk for Amazon Annapurna Labs root ports Jonathan Chocron
2019-08-22  8:31   ` Andrew Murray
2019-09-04 13:33     ` Chocron, Jonathan
2019-08-21 15:35 ` [PATCH v4 3/7] PCI/VPD: Add VPD release quirk for Amazon's Annapurna Labs Root Port Jonathan Chocron
2019-08-22 11:41   ` Andrew Murray
2019-08-22 14:36     ` Chocron, Jonathan
2019-08-22 15:07       ` Andrew Murray
2019-09-04 13:36         ` Chocron, Jonathan
2019-09-04 14:08           ` Andrew Murray
2019-08-22 15:08       ` Andrew Murray
2019-08-21 15:35 ` [PATCH v4 4/7] PCI: Add quirk to disable MSI-X support " Jonathan Chocron
2019-08-22  7:54   ` Andrew Murray [this message]
2019-08-21 15:47 ` [PATCH v4 5/7] dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding Jonathan Chocron
2019-08-22 11:15   ` Andrew Murray
2019-08-27 18:53   ` Rob Herring
2019-08-21 15:47 ` [PATCH v4 6/7] PCI: dwc: al: Add support for DW based driver type Jonathan Chocron
2019-08-22 10:00   ` Andrew Murray
2019-08-22 15:23     ` Chocron, Jonathan
2019-08-21 15:47 ` [PATCH v4 7/7] PCI: dwc: Add validation that PCIe core is set to correct mode Jonathan Chocron
2019-08-22 11:13   ` Andrew Murray
2019-08-22 16:30     ` Chocron, Jonathan
2019-08-27  9:48       ` Andrew Murray
2019-09-04 13:40         ` Chocron, Jonathan
2019-09-02  9:58 ` [PATCH v4 0/7] Amazon's Annapurna Labs DT-based PCIe host controller driver Lorenzo Pieralisi
2019-09-04 13:41   ` Chocron, Jonathan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190822075409.GK23903@e119886-lin.cambridge.arm.com \
    --to=andrew.murray@arm.com \
    --cc=alisaidi@amazon.com \
    --cc=barakw@amazon.com \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw@amazon.co.uk \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hanochu@amazon.com \
    --cc=hhhawa@amazon.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonnyc@amazon.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ronenk@amazon.com \
    --cc=talel@amazon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox