linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: sathyanarayanan.kuppuswamy@linux.intel.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	ashok.raj@intel.com
Subject: Re: [PATCH v16 3/9] PCI/ERR: Remove service dependency in pcie_do_recovery()
Date: Tue, 3 Mar 2020 11:04:42 -0600	[thread overview]
Message-ID: <20200303170442.GA89997@google.com> (raw)
In-Reply-To: <152c530a3ca8780ae85c2325f97f5f35f5d3602f.1582850766.git.sathyanarayanan.kuppuswamy@linux.intel.com>

On Thu, Feb 27, 2020 at 04:59:45PM -0800, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> 
> Currently we pass PCIe service type parameter to pcie_do_recovery()
> function which was in-turn used by reset_link() function to identify
> the underlying pci_port_service_driver and then initiate the driver
> specific reset_link call. Instead of using this roundabout way, we
> can just pass the driver specific reset_link callback function when
> calling pcie_do_recovery() function.

I love this!  And I think pcie_port_find_service() is now unused.  I
can add a patch to remove it.

> This change will also enable non PCIe service driver to call
> pcie_do_recovery() function. This is required for adding Error
> Disconnect Recover (EDR) support.
> 
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
>  drivers/pci/pci.h      |  2 +-
>  drivers/pci/pcie/aer.c | 11 +++++------
>  drivers/pci/pcie/dpc.c |  2 +-
>  drivers/pci/pcie/err.c | 16 ++++++++--------
>  4 files changed, 15 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index a4c360515a69..2962200bfe35 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -548,7 +548,7 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
>  
>  /* PCI error reporting and recovery */
>  void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
> -		      u32 service);
> +		      pci_ers_result_t (*reset_cb)(struct pci_dev *pdev));
>  
>  bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
>  #ifdef CONFIG_PCIEASPM
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 4a818b07a1af..1235eca0a2e6 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -102,6 +102,7 @@ struct aer_stats {
>  #define ERR_UNCOR_ID(d)			(d >> 16)
>  
>  static int pcie_aer_disable;
> +static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
>  
>  void pci_no_aer(void)
>  {
> @@ -1053,11 +1054,9 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
>  					info->status);
>  		pci_aer_clear_device_status(dev);
>  	} else if (info->severity == AER_NONFATAL)
> -		pcie_do_recovery(dev, pci_channel_io_normal,
> -				 PCIE_PORT_SERVICE_AER);
> +		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
>  	else if (info->severity == AER_FATAL)
> -		pcie_do_recovery(dev, pci_channel_io_frozen,
> -				 PCIE_PORT_SERVICE_AER);
> +		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
>  	pci_dev_put(dev);
>  }
>  
> @@ -1094,10 +1093,10 @@ static void aer_recover_work_func(struct work_struct *work)
>  		cper_print_aer(pdev, entry.severity, entry.regs);
>  		if (entry.severity == AER_NONFATAL)
>  			pcie_do_recovery(pdev, pci_channel_io_normal,
> -					 PCIE_PORT_SERVICE_AER);
> +					 aer_root_reset);
>  		else if (entry.severity == AER_FATAL)
>  			pcie_do_recovery(pdev, pci_channel_io_frozen,
> -					 PCIE_PORT_SERVICE_AER);
> +					 aer_root_reset);
>  		pci_dev_put(pdev);
>  	}
>  }
> diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
> index 6b116d7fdb89..114358d62ddf 100644
> --- a/drivers/pci/pcie/dpc.c
> +++ b/drivers/pci/pcie/dpc.c
> @@ -227,7 +227,7 @@ static irqreturn_t dpc_handler(int irq, void *context)
>  	}
>  
>  	/* We configure DPC so it only triggers on ERR_FATAL */
> -	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
> +	pcie_do_recovery(pdev, pci_channel_io_frozen, dpc_reset_link);
>  
>  	return IRQ_HANDLED;
>  }
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index eefefe03857a..05f87bc9d011 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -162,14 +162,13 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
>  	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
>  }
>  
> -static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
> +static pci_ers_result_t reset_link(struct pci_dev *dev,
> +			pci_ers_result_t (*reset_cb)(struct pci_dev *pdev))
>  {
>  	pci_ers_result_t status;
> -	struct pcie_port_service_driver *driver = NULL;
>  
> -	driver = pcie_port_find_service(dev, service);
> -	if (driver && driver->reset_link) {
> -		status = driver->reset_link(dev);
> +	if (reset_cb) {
> +		status = reset_cb(dev);
>  	} else if (pcie_downstream_port(dev)) {
>  		status = default_reset_link(dev);
>  	} else {
> @@ -187,8 +186,9 @@ static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
>  	return status;
>  }
>  
> -void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
> -		      u32 service)
> +void pcie_do_recovery(struct pci_dev *dev,
> +		      enum pci_channel_state state,
> +		      pci_ers_result_t (*reset_cb)(struct pci_dev *pdev))
>  {
>  	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
>  	struct pci_bus *bus;
> @@ -209,7 +209,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>  		pci_walk_bus(bus, report_normal_detected, &status);
>  
>  	if (state == pci_channel_io_frozen) {
> -		status = reset_link(dev, service);
> +		status = reset_link(dev, reset_cb);
>  		if (status != PCI_ERS_RESULT_RECOVERED)
>  			goto failed;
>  	}
> -- 
> 2.21.0
> 

  reply	other threads:[~2020-03-03 17:04 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-28  0:59 [PATCH v16 0/9] Add Error Disconnect Recover (EDR) support sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 1/9] PCI/ERR: Update error status after reset_link() sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 2/9] PCI/AER: Move pci_cleanup_aer_error_status_regs() declaration to pci.h sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 3/9] PCI/ERR: Remove service dependency in pcie_do_recovery() sathyanarayanan.kuppuswamy
2020-03-03 17:04   ` Bjorn Helgaas [this message]
2020-03-03 23:59     ` Kuppuswamy, Sathyanarayanan
2020-02-28  0:59 ` [PATCH v16 4/9] PCI/ERR: Return status of pcie_do_recovery() sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 5/9] PCI/DPC: Cache DPC capabilities in pci_init_capabilities() sathyanarayanan.kuppuswamy
2020-03-04  0:47   ` Bjorn Helgaas
2020-03-04  1:01     ` Kuppuswamy, Sathyanarayanan
2020-02-28  0:59 ` [PATCH v16 6/9] PCI/AER: Allow clearing Error Status Register in FF mode sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 7/9] PCI/DPC: Export DPC error recovery functions sathyanarayanan.kuppuswamy
2020-03-05 16:37   ` Christoph Hellwig
2020-03-05 17:42     ` Kuppuswamy Sathyanarayanan
2020-03-05 18:59       ` Bjorn Helgaas
2020-03-05 19:22         ` Kuppuswamy Sathyanarayanan
2020-02-28  0:59 ` [PATCH v16 8/9] PCI/DPC: Add Error Disconnect Recover (EDR) support sathyanarayanan.kuppuswamy
2020-02-28  0:59 ` [PATCH v16 9/9] PCI/ACPI: Enable EDR support sathyanarayanan.kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200303170442.GA89997@google.com \
    --to=helgaas@kernel.org \
    --cc=ashok.raj@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).