From: Bjorn Helgaas <helgaas@kernel.org>
To: Jon Derrick <jonathan.derrick@intel.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Pawel Baldysiak <pawel.baldysiak@intel.com>,
Sinan Kaya <okaya@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Keith Busch <kbusch@kernel.org>,
Alexandru Gagniuc <mr.nuke.me@gmail.com>,
Christoph Hellwig <hch@lst.de>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Russell King <rmk+kernel@armlinux.org.uk>
Subject: Re: [RFC 1/9] PCI: pci-bridge-emul: Update PCIe register behaviors
Date: Sat, 28 Mar 2020 16:42:18 -0500 [thread overview]
Message-ID: <20200328214218.GA129350@google.com> (raw)
In-Reply-To: <1581120007-5280-2-git-send-email-jonathan.derrick@intel.com>
[+cc Thomas, Russell]
On Fri, Feb 07, 2020 at 04:59:59PM -0700, Jon Derrick wrote:
> Update the PCIe register behaviors and comments for PCIe v5.0.
> Replace the specific bit definitions with BIT and GENMASK to make
> updating easier in the future.
I think this patch makes sense on its own, independent of the rest of
the series. I *would* like to see it split into (a) a "no changes"
patch that converts to BIT/GENMASK, and (b) another patch that
contains only the PCIe r5.0 updates.
> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
> ---
> drivers/pci/pci-bridge-emul.c | 54 +++++++++++++++++++++----------------------
> 1 file changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
> index fffa770..d065c2a 100644
> --- a/drivers/pci/pci-bridge-emul.c
> +++ b/drivers/pci/pci-bridge-emul.c
> @@ -191,12 +191,12 @@ struct pci_bridge_reg_behavior {
> .rw = GENMASK(15, 0),
>
> /*
> - * Device status register has 4 bits W1C, then 2 bits
> - * RO, the rest is reserved
> + * Device status register has bits 6 and [3:0] W1C, [5:4] RO,
> + * the rest is reserved
> */
> - .w1c = GENMASK(19, 16),
> - .ro = GENMASK(20, 19),
> - .rsvd = GENMASK(31, 21),
> + .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
> + .ro = GENMASK(5, 4) << 16,
> + .rsvd = GENMASK(15, 7) << 16,
> },
>
> [PCI_EXP_LNKCAP / 4] = {
> @@ -207,15 +207,16 @@ struct pci_bridge_reg_behavior {
>
> [PCI_EXP_LNKCTL / 4] = {
> /*
> - * Link control has bits [1:0] and [11:3] RW, the
> - * other bits are reserved.
> - * Link status has bits [13:0] RO, and bits [14:15]
> + * Link control has bits [15:14], [11:3] and [1:0] RW, the
> + * rest is reserved.
> + *
> + * Link status has bits [13:0] RO, and bits [15:14]
> * W1C.
> */
> - .rw = GENMASK(11, 3) | GENMASK(1, 0),
> + .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
> .ro = GENMASK(13, 0) << 16,
> .w1c = GENMASK(15, 14) << 16,
> - .rsvd = GENMASK(15, 12) | BIT(2),
> + .rsvd = GENMASK(13, 12) | BIT(2),
> },
>
> [PCI_EXP_SLTCAP / 4] = {
> @@ -224,19 +225,16 @@ struct pci_bridge_reg_behavior {
>
> [PCI_EXP_SLTCTL / 4] = {
> /*
> - * Slot control has bits [12:0] RW, the rest is
> + * Slot control has bits [14:0] RW, the rest is
> * reserved.
> *
> - * Slot status has a mix of W1C and RO bits, as well
> - * as reserved bits.
> + * Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the
> + * rest is reserved.
> */
> - .rw = GENMASK(12, 0),
> - .w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
> - PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
> - PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
> - .ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
> - PCI_EXP_SLTSTA_EIS) << 16,
> - .rsvd = GENMASK(15, 12) | (GENMASK(15, 9) << 16),
> + .rw = GENMASK(14, 0),
> + .w1c = (BIT(8) | GENMASK(4, 0)) << 16,
> + .ro = GENMASK(7, 5) << 16,
> + .rsvd = BIT(15) | (GENMASK(15, 9) << 16),
> },
>
> [PCI_EXP_RTCTL / 4] = {
> @@ -244,18 +242,20 @@ struct pci_bridge_reg_behavior {
> * Root control has bits [4:0] RW, the rest is
> * reserved.
> *
> - * Root status has bit 0 RO, the rest is reserved.
> + * Root capabilities has bit 0 RO, the rest is reserved.
> */
> - .rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
> - PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE |
> - PCI_EXP_RTCTL_CRSSVE),
> - .ro = PCI_EXP_RTCAP_CRSVIS << 16,
> + .rw = GENMASK(4, 0),
> + .ro = BIT(0) << 16,
> .rsvd = GENMASK(15, 5) | (GENMASK(15, 1) << 16),
> },
>
> [PCI_EXP_RTSTA / 4] = {
> - .ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING,
> - .w1c = PCI_EXP_RTSTA_PME,
> + /*
> + * Root status has bits 17 and [15:0] RO, bit 16 W1C, the rest
> + * is reserved.
> + */
> + .ro = BIT(17) | GENMASK(15, 0),
> + .w1c = BIT(16),
> .rsvd = GENMASK(31, 18),
> },
> };
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2020-03-28 21:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 23:59 [RFC 0/9] PCIe Hotplug Slot Emulation driver Jon Derrick
2020-02-07 23:59 ` [RFC 1/9] PCI: pci-bridge-emul: Update PCIe register behaviors Jon Derrick
2020-02-08 9:55 ` Andy Shevchenko
2020-03-28 21:42 ` Bjorn Helgaas [this message]
2020-02-08 0:00 ` [RFC 2/9] PCI: pci-bridge-emul: Eliminate reserved member Jon Derrick
2020-03-28 21:43 ` Bjorn Helgaas
2020-02-08 0:00 ` [RFC 3/9] PCI: pci-bridge-emul: Provide a helper to set behavior Jon Derrick
2020-02-08 0:00 ` [RFC 4/9] PCI: pciehp: Indirect slot register operations Jon Derrick
2020-02-08 0:00 ` [RFC 5/9] PCI: Add pcie_port_slot_emulated stub Jon Derrick
2020-02-08 0:00 ` [RFC 6/9] PCI: pciehp: Expose the poll loop to other drivers Jon Derrick
2020-02-08 0:00 ` [RFC 7/9] PCI: Move pci_dev_str_match to search.c Jon Derrick
2020-02-08 0:00 ` [RFC 8/9] PCI: pciehp: Add hotplug slot emulation driver Jon Derrick
2020-02-08 0:00 ` [RFC 9/9] PCI: pciehp: Wire up pcie_port_emulate_slot and pciehp_emul Jon Derrick
2020-02-10 7:01 ` [RFC 0/9] PCIe Hotplug Slot Emulation driver Christoph Hellwig
2020-02-10 15:05 ` Derrick, Jonathan
2020-02-10 16:58 ` hch
2020-02-10 17:09 ` Derrick, Jonathan
2020-03-28 21:51 ` Bjorn Helgaas
2020-03-30 17:43 ` Derrick, Jonathan
2020-03-30 17:49 ` hch
2020-04-01 21:45 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200328214218.GA129350@google.com \
--to=helgaas@kernel.org \
--cc=andriy.shevchenko@intel.com \
--cc=hch@lst.de \
--cc=jonathan.derrick@intel.com \
--cc=kbusch@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=mr.nuke.me@gmail.com \
--cc=okaya@kernel.org \
--cc=pawel.baldysiak@intel.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).