From: Rob Herring <robh@kernel.org>
To: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Mark Rutland <mark.rutland@arm.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <amurray@thegoodpenguin.co.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 09/10] devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie
Date: Tue, 14 Apr 2020 12:07:57 -0500 [thread overview]
Message-ID: <20200414170757.GA11622@bogus> (raw)
In-Reply-To: <20200402121148.1767-10-ansuelsmth@gmail.com>
On Thu, Apr 02, 2020 at 02:11:46PM +0200, Ansuel Smith wrote:
> Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset.
> In ipq8064 phy_tx0_term_offset is 7, in rev 2, ipq8065 and other SoC it's
> set to 0 by default.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> .../devicetree/bindings/pci/qcom,pcie.txt | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 6efcef040741..b699f126ea29 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -5,6 +5,7 @@
> Value type: <stringlist>
> Definition: Value should contain
> - "qcom,pcie-ipq8064" for ipq8064
> + - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
> - "qcom,pcie-apq8064" for apq8064
> - "qcom,pcie-apq8084" for apq8084
> - "qcom,pcie-msm8996" for msm8996 or apq8096
> @@ -295,6 +296,47 @@
> pinctrl-names = "default";
> };
>
> +* Example for ipq8064 rev 2 or ipq8065
Just a new compatible string doesn't warrant a whole new example.
> + pcie@1b500000 {
> + compatible = "qcom,pcie-ipq8064-v2", "snps,dw-pcie";
> + reg = <0x1b500000 0x1000
> + 0x1b502000 0x80
> + 0x1b600000 0x100
> + 0x0ff00000 0x100000>;
> + reg-names = "dbi", "elbi", "parf", "config";
> + device_type = "pci";
> + linux,pci-domain = <0>;
> + bus-range = <0x00 0xff>;
> + num-lanes = <1>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
> + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
> + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
> + interrupt-names = "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> + clocks = <&gcc PCIE_A_CLK>,
> + <&gcc PCIE_H_CLK>,
> + <&gcc PCIE_PHY_CLK>,
> + <&gcc PCIE_AUX_CLK>,
> + <&gcc PCIE_ALT_REF_CLK>;
> + clock-names = "core", "iface", "phy", "aux", "ref";
> + resets = <&gcc PCIE_ACLK_RESET>,
> + <&gcc PCIE_HCLK_RESET>,
> + <&gcc PCIE_POR_RESET>,
> + <&gcc PCIE_PCI_RESET>,
> + <&gcc PCIE_PHY_RESET>,
> + <&gcc PCIE_EXT_RESET>;
> + reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
> + pinctrl-0 = <&pcie_pins_default>;
> + pinctrl-names = "default";
> + };
> +
> * Example for apq8084
> pcie0@fc520000 {
> compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
> --
> 2.25.1
>
next prev parent reply other threads:[~2020-04-14 17:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 12:11 [PATCH v2 00/10] Multiple fixes in PCIe qcom driver Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 01/10] PCIe: qcom: add missing ipq806x clocks in PCIe driver Ansuel Smith
2020-04-08 8:50 ` Stanimir Varbanov
2020-04-08 12:36 ` R: " ansuelsmth
2020-04-08 12:48 ` Stanimir Varbanov
2020-04-08 12:55 ` R: " ansuelsmth
2020-04-08 13:06 ` Stanimir Varbanov
2020-04-02 12:11 ` [PATCH v2 02/10] devicetree: bindings: pci: add missing clks to qcom,pcie Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 03/10] PCIe: qcom: change duplicate PCI reset to phy reset Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 04/10] PCIe: qcom: Fixed pcie_phy_clk branch issue Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 05/10] PCIe: qcom: add missing reset for ipq806x Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 06/10] devicetree: bindings: pci: add ext reset to qcom,pcie Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 07/10] PCIe: qcom: fix init problem with missing PARF programming Ansuel Smith
2020-04-08 8:50 ` Stanimir Varbanov
2020-04-08 12:38 ` R: " ansuelsmth
2020-04-08 13:18 ` Stanimir Varbanov
2020-04-02 12:11 ` [PATCH v2 08/10] PCIe: qcom: add ipq8064 rev2 variant and set tx term offset Ansuel Smith
2020-04-02 12:11 ` [PATCH v2 09/10] devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie Ansuel Smith
2020-04-14 17:07 ` Rob Herring [this message]
2020-04-02 12:11 ` [PATCH v2 10/10] PCIe: qcom: add Force GEN1 support Ansuel Smith
2020-04-03 9:01 ` Stanimir Varbanov
2020-04-14 17:09 ` Rob Herring
2020-04-03 9:01 ` [PATCH v2 00/10] Multiple fixes in PCIe qcom driver Stanimir Varbanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200414170757.GA11622@bogus \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=amurray@thegoodpenguin.co.uk \
--cc=ansuelsmth@gmail.com \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=svarbanov@mm-sol.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).