From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Michael Jamet <michael.jamet@intel.com>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andreas Noever <andreas.noever@gmail.com>,
Rajmohan Mani <rajmohan.mani@intel.com>,
Dana Alkattan <dana.alkattan@intel.com>,
Lukas Wunner <lukas@wunner.de>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH 14/19] thunderbolt: Disable lane 1 for XDomain connection
Date: Wed, 19 Aug 2020 14:59:00 +0300 [thread overview]
Message-ID: <20200819115905.59834-15-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20200819115905.59834-1-mika.westerberg@linux.intel.com>
USB4 spec mandates that the lane 1 should be disabled if lanes are not
bonded. For host-to-host connections (XDomain) we don't support lane
bonding so in order to be compatible with the spec, disable lane 1 when
another host is connected.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/switch.c | 44 +++++++++++++++++++++++++++++++++++
drivers/thunderbolt/tb.c | 8 +++++++
drivers/thunderbolt/tb.h | 2 ++
drivers/thunderbolt/tb_regs.h | 1 +
4 files changed, 55 insertions(+)
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 1c45f8baf487..a8df25dae57b 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -673,6 +673,50 @@ int tb_port_unlock(struct tb_port *port)
return 0;
}
+static int __tb_port_enable(struct tb_port *port, bool enable)
+{
+ int ret;
+ u32 phy;
+
+ if (!tb_port_is_null(port))
+ return -EINVAL;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (enable)
+ phy &= ~LANE_ADP_CS_1_LD;
+ else
+ phy |= LANE_ADP_CS_1_LD;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+/**
+ * tb_port_enable() - Enable lane adapter
+ * @port: Port to enable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to enable it.
+ */
+int tb_port_enable(struct tb_port *port)
+{
+ return __tb_port_enable(port, true);
+}
+
+/**
+ * tb_port_disable() - Disable lane adapter
+ * @port: Port to disable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to disable it.
+ */
+int tb_port_disable(struct tb_port *port)
+{
+ return __tb_port_enable(port, false);
+}
+
/**
* tb_init_port() - initialize a port
*
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 602e00e0b45e..214e47656be6 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -142,6 +142,12 @@ static void tb_discover_tunnels(struct tb_switch *sw)
static int tb_port_configure_xdomain(struct tb_port *port)
{
+ /*
+ * XDomain paths currently only support single lane so we must
+ * disable the other lane according to USB4 spec.
+ */
+ tb_port_disable(port->dual_link_port);
+
if (tb_switch_is_usb4(port->sw))
return usb4_port_configure_xdomain(port);
return tb_lc_configure_xdomain(port);
@@ -153,6 +159,8 @@ static void tb_port_unconfigure_xdomain(struct tb_port *port)
usb4_port_unconfigure_xdomain(port);
else
tb_lc_unconfigure_xdomain(port);
+
+ tb_port_enable(port->dual_link_port);
}
static void tb_scan_xdomain(struct tb_port *port)
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index dbe332c3e95e..f58cd3fa98ea 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -790,6 +790,8 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_set_initial_credits(struct tb_port *port, u32 credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
int tb_port_unlock(struct tb_port *port);
+int tb_port_enable(struct tb_port *port);
+int tb_port_disable(struct tb_port *port);
int tb_port_alloc_in_hopid(struct tb_port *port, int hopid, int max_hopid);
void tb_port_release_in_hopid(struct tb_port *port, int hopid);
int tb_port_alloc_out_hopid(struct tb_port *port, int hopid, int max_hopid);
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index a553be24f1c0..d1a40baa63d2 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -279,6 +279,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4
#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1
#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3
+#define LANE_ADP_CS_1_LD BIT(14)
#define LANE_ADP_CS_1_LB BIT(15)
#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16)
#define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT 16
--
2.28.0
next prev parent reply other threads:[~2020-08-19 12:02 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 11:58 [PATCH 00/19] thunderbolt: Power Management improvements Mika Westerberg
2020-08-19 11:58 ` [PATCH 01/19] thunderbolt: Optimize Force Power logic Mika Westerberg
2020-08-19 11:58 ` [PATCH 02/19] thunderbolt: Optimize NHI LC mailbox command processing Mika Westerberg
2020-08-19 11:58 ` [PATCH 03/19] thunderbolt: Software CM only should set force power in Tiger Lake Mika Westerberg
2020-08-19 11:58 ` [PATCH 04/19] thunderbolt: Use bit 31 to check if Firmware CM is running " Mika Westerberg
2020-08-19 11:58 ` [PATCH 05/19] thunderbolt: Do not program NFC buffers for USB4 router protocol adapters Mika Westerberg
2020-08-19 11:58 ` [PATCH 06/19] thunderbolt: No need to log an error if tb_switch_lane_bonding_enable() fails Mika Westerberg
2020-08-19 11:58 ` [PATCH 07/19] thunderbolt: Send reset only to first generation routers Mika Westerberg
2020-08-19 11:58 ` [PATCH 08/19] thunderbolt: Tear down DP tunnels when suspending Mika Westerberg
2020-08-19 11:58 ` [PATCH 09/19] thunderbolt: Initialize TMU again on resume Mika Westerberg
2020-08-19 11:58 ` [PATCH 10/19] thunderbolt: Do not change default USB4 router notification timeout Mika Westerberg
2020-08-19 11:58 ` [PATCH 11/19] thunderbolt: Configure link after lane bonding is enabled Mika Westerberg
2020-08-19 11:58 ` [PATCH 12/19] thunderbolt: Set port configured for both ends of the link Mika Westerberg
2020-08-19 11:58 ` [PATCH 13/19] thunderbolt: Configure port for XDomain Mika Westerberg
2020-08-19 11:59 ` Mika Westerberg [this message]
2020-08-19 11:59 ` [PATCH 15/19] thunderbolt: Enable wakes from system suspend Mika Westerberg
2020-08-19 11:59 ` [PATCH 16/19] PCI / thunderbolt: Switch to use device links instead of PCI quirk Mika Westerberg
2020-08-20 17:24 ` Bjorn Helgaas
2020-08-19 11:59 ` [PATCH 17/19] ACPI: Export acpi_get_first_physical_node() to modules Mika Westerberg
2020-08-19 11:59 ` [PATCH 18/19] thunderbolt: Create device links from ACPI description Mika Westerberg
2020-08-19 11:59 ` [PATCH 19/19] thunderbolt: Add runtime PM for Software CM Mika Westerberg
2020-09-03 9:15 ` [PATCH 00/19] thunderbolt: Power Management improvements Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200819115905.59834-15-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=bhelgaas@google.com \
--cc=dana.alkattan@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=michael.jamet@intel.com \
--cc=rafael.j.wysocki@intel.com \
--cc=rajmohan.mani@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox