Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Ethan Zhao <haifeng.zhao@intel.com>
To: bhelgaas@google.com, oohall@gmail.com, ruscur@russell.cc,
	lukas@wunner.de, andriy.shevchenko@linux.intel.com,
	stuart.w.hayes@gmail.com, mr.nuke.me@gmail.com,
	mika.westerberg@linux.intel.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	ashok.raj@linux.intel.com, sathyanarayanan.kuppuswamy@intel.com,
	xerces.zhao@gmail.com, Ethan Zhao <haifeng.zhao@intel.com>
Subject: [PATCH v6 4/5] PCI: only return true when dev io state is really changed
Date: Wed, 30 Sep 2020 03:05:36 -0400	[thread overview]
Message-ID: <20200930070537.30982-5-haifeng.zhao@intel.com> (raw)
In-Reply-To: <20200930070537.30982-1-haifeng.zhao@intel.com>

When uncorrectable error happens, AER driver and DPC driver interrupt
handlers likely call

   pcie_do_recovery()
   ->pci_walk_bus()
     ->report_frozen_detected()

with pci_channel_io_frozen the same time.
   If pci_dev_set_io_state() return true even if the original state is
pci_channel_io_frozen, that will cause AER or DPC handler re-enter
the error detecting and recovery procedure one after another.
   The result is the recovery flow mixed between AER and DPC.
So simplify the pci_dev_set_io_state() function to only return true
when dev->error_state is changed.

Signed-off-by: Ethan Zhao <haifeng.zhao@intel.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Tested-by: Shanshan Zhang <ShanshanX.Zhang@intel.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
Changnes:
 v2: revise description and code according to suggestion from Andy.
 v3: change code to simpler.
 v4: no change.
 v5: no change.
 v6: no change.

 drivers/pci/pci.h | 37 +++++--------------------------------
 1 file changed, 5 insertions(+), 32 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 455b32187abd..f2beeaeda321 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -359,39 +359,12 @@ struct pci_sriov {
 static inline bool pci_dev_set_io_state(struct pci_dev *dev,
 					pci_channel_state_t new)
 {
-	bool changed = false;
-
 	device_lock_assert(&dev->dev);
-	switch (new) {
-	case pci_channel_io_perm_failure:
-		switch (dev->error_state) {
-		case pci_channel_io_frozen:
-		case pci_channel_io_normal:
-		case pci_channel_io_perm_failure:
-			changed = true;
-			break;
-		}
-		break;
-	case pci_channel_io_frozen:
-		switch (dev->error_state) {
-		case pci_channel_io_frozen:
-		case pci_channel_io_normal:
-			changed = true;
-			break;
-		}
-		break;
-	case pci_channel_io_normal:
-		switch (dev->error_state) {
-		case pci_channel_io_frozen:
-		case pci_channel_io_normal:
-			changed = true;
-			break;
-		}
-		break;
-	}
-	if (changed)
-		dev->error_state = new;
-	return changed;
+	if (dev->error_state == new)
+		return false;
+
+	dev->error_state = new;
+	return true;
 }
 
 static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
-- 
2.18.4


  parent reply	other threads:[~2020-09-30  7:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30  7:05 [PATCH v6 0/5] Fix DPC hotplug race and enhance error handling Ethan Zhao
2020-09-30  7:05 ` [PATCH v6 1/5] PCI/ERR: get device before call device driver to avoid NULL pointer dereference Ethan Zhao
2020-09-30  7:05 ` [PATCH v6 2/5] PCI/DPC: define a function to check and wait till port finish DPC handling Ethan Zhao
2020-09-30  7:05 ` [PATCH v6 3/5] PCI: pciehp: check and wait port status out of DPC before handling DLLSC and PDC Ethan Zhao
2020-09-30  7:05 ` Ethan Zhao [this message]
2020-10-02 16:08   ` [PATCH v6 4/5] PCI: only return true when dev io state is really changed Sinan Kaya
2020-10-03  5:46     ` Ethan Zhao
2020-10-02 17:29   ` Bjorn Helgaas
2020-10-03  7:05     ` Ethan Zhao
2020-09-30  7:05 ` [PATCH v6 5/5] PCI/ERR: don't mix io state not changed and no driver together Ethan Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200930070537.30982-5-haifeng.zhao@intel.com \
    --to=haifeng.zhao@intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=ashok.raj@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mika.westerberg@linux.intel.com \
    --cc=mr.nuke.me@gmail.com \
    --cc=oohall@gmail.com \
    --cc=ruscur@russell.cc \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=stuart.w.hayes@gmail.com \
    --cc=xerces.zhao@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox