Re: [PATCH] ACPI: Remove trailing whitespace

[Bjorn Helgaas <helgaas@kernel.org>]

On Mon, Nov 02, 2020 at 02:36:41PM +0100, Maximilian Luz wrote:
> Remove trailing whitespace and fix some whitespace inconsitencies while
> at it.

I'm OK with this as long as somebody fixes the
s/inconsitencies/inconsistencies/
above.  I assume you've scanned all of drivers/acpi/ for similar
issues so they can all be fixed at once.

This is up to Rafael, of course.

> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
> ---
>  drivers/acpi/pci_irq.c           |  2 +-
>  drivers/acpi/pci_link.c          | 12 ++++++------
>  drivers/acpi/power.c             |  4 ++--
>  drivers/acpi/processor_perflib.c |  4 ++--
>  4 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index dea8a60e18a4..14ee631cb7cf 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
>  	 * configure the IRQ assigned to this slot|dev|pin.  The 'source_index'
>  	 * indicates which resource descriptor in the resource template (of
>  	 * the link device) this interrupt is allocated from.
> -	 * 
> +	 *
>  	 * NOTE: Don't query the Link Device for IRQ information at this time
>  	 *       because Link Device enumeration may not have occurred yet
>  	 *       (e.g. exists somewhere 'below' this _PRT entry in the ACPI
> diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
> index 606da5d77ad3..fb4c5632a232 100644
> --- a/drivers/acpi/pci_link.c
> +++ b/drivers/acpi/pci_link.c
> @@ -6,8 +6,8 @@
>   *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
>   *  Copyright (C) 2002       Dominik Brodowski <devel@brodo.de>
>   *
> - * TBD: 
> - *      1. Support more than one IRQ resource entry per link device (index).
> + * TBD:
> + *	1. Support more than one IRQ resource entry per link device (index).
>   *	2. Implement start/stop mechanism and use ACPI Bus Driver facilities
>   *	   for IRQ management (e.g. start()->_SRS).
>   */
> @@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
>  		}
>  	}
>  
> -	/* 
> -	 * Query and parse _CRS to get the current IRQ assignment. 
> +	/*
> +	 * Query and parse _CRS to get the current IRQ assignment.
>  	 */
>  
>  	status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
> @@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
>  /*
>   * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
>   * Link Devices to move the PIRQs around to minimize sharing.
> - * 
> + *
>   * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
>   * that the BIOS has already set to active.  This is necessary because
>   * ACPI has no automatic means of knowing what ISA IRQs are used.  Note that
> @@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
>   *
>   * Note that PCI IRQ routers have a list of possible IRQs,
>   * which may not include the IRQs this table says are available.
> - * 
> + *
>   * Since this heuristic can't tell the difference between a link
>   * that no device will attach to, vs. a link which may be shared
>   * by multiple active devices -- it is not optimal.
> diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
> index 837b875d075e..9c4c3196cb07 100644
> --- a/drivers/acpi/power.c
> +++ b/drivers/acpi/power.c
> @@ -13,7 +13,7 @@
>   * 1. via "Device Specific (D-State) Control"
>   * 2. via "Power Resource Control".
>   * The code below deals with ACPI Power Resources control.
> - * 
> + *
>   * An ACPI "power resource object" represents a software controllable power
>   * plane, clock plane, or other resource depended on by a device.
>   *
> @@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
>  
>  /*
>   * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
> - * 1. Power on the power resources required for the wakeup device 
> + * 1. Power on the power resources required for the wakeup device
>   * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
>   *    State Wake) for the device, if present
>   */
> diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
> index 5909e8fa4013..f00e66de6c53 100644
> --- a/drivers/acpi/processor_perflib.c
> +++ b/drivers/acpi/processor_perflib.c
> @@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
>  		goto err_ret;
>  
>  	/*
> -	 * Now that we have _PSD data from all CPUs, lets setup P-state 
> +	 * Now that we have _PSD data from all CPUs, lets setup P-state
>  	 * domain info.
>  	 */
>  	for_each_possible_cpu(i) {
> @@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
>  			if (match_pdomain->domain != pdomain->domain)
>  				continue;
>  
> -			match_pr->performance->shared_type = 
> +			match_pr->performance->shared_type =
>  					pr->performance->shared_type;
>  			cpumask_copy(match_pr->performance->shared_cpu_map,
>  				     pr->performance->shared_cpu_map);
> -- 
> 2.29.2
>