From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Randy Dunlap" <rdunlap@infradead.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"kernel test robot" <lkp@intel.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, "Sasha Levin" <sashal@kernel.org>,
linux-pci@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 05/37] PCI: ftpci100: Rename macro name collision
Date: Sat, 10 Jul 2021 19:49:43 -0400 [thread overview]
Message-ID: <20210710235016.3221124-5-sashal@kernel.org> (raw)
In-Reply-To: <20210710235016.3221124-1-sashal@kernel.org>
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 5be967d5016ac5ffb9c4d0df51b48441ee4d5ed1 ]
PCI_IOSIZE is defined in mach-loongson64/spaces.h, so change the name
of the PCI_* macros in pci-ftpci100.c to use FTPCI_* so that they are
more localized and won't conflict with other drivers or arches.
../drivers/pci/controller/pci-ftpci100.c:37: warning: "PCI_IOSIZE" redefined
37 | #define PCI_IOSIZE 0x00
|
In file included from ../arch/mips/include/asm/addrspace.h:13,
... from ../drivers/pci/controller/pci-ftpci100.c:15:
arch/mips/include/asm/mach-loongson64/spaces.h:11: note: this is the location of the previous definition
11 | #define PCI_IOSIZE SZ_16M
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210517234117.3660-1-rdunlap@infradead.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/pci-ftpci100.c | 30 +++++++++++++--------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index da3cd216da00..aefef1986201 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -34,12 +34,12 @@
* Special configuration registers directly in the first few words
* in I/O space.
*/
-#define PCI_IOSIZE 0x00
-#define PCI_PROT 0x04 /* AHB protection */
-#define PCI_CTRL 0x08 /* PCI control signal */
-#define PCI_SOFTRST 0x10 /* Soft reset counter and response error enable */
-#define PCI_CONFIG 0x28 /* PCI configuration command register */
-#define PCI_DATA 0x2C
+#define FTPCI_IOSIZE 0x00
+#define FTPCI_PROT 0x04 /* AHB protection */
+#define FTPCI_CTRL 0x08 /* PCI control signal */
+#define FTPCI_SOFTRST 0x10 /* Soft reset counter and response error enable */
+#define FTPCI_CONFIG 0x28 /* PCI configuration command register */
+#define FTPCI_DATA 0x2C
#define FARADAY_PCI_STATUS_CMD 0x04 /* Status and command */
#define FARADAY_PCI_PMC 0x40 /* Power management control */
@@ -195,9 +195,9 @@ static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
PCI_CONF_WHERE(config) |
PCI_CONF_ENABLE,
- p->base + PCI_CONFIG);
+ p->base + FTPCI_CONFIG);
- *value = readl(p->base + PCI_DATA);
+ *value = readl(p->base + FTPCI_DATA);
if (size == 1)
*value = (*value >> (8 * (config & 3))) & 0xFF;
@@ -230,17 +230,17 @@ static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
PCI_CONF_WHERE(config) |
PCI_CONF_ENABLE,
- p->base + PCI_CONFIG);
+ p->base + FTPCI_CONFIG);
switch (size) {
case 4:
- writel(value, p->base + PCI_DATA);
+ writel(value, p->base + FTPCI_DATA);
break;
case 2:
- writew(value, p->base + PCI_DATA + (config & 3));
+ writew(value, p->base + FTPCI_DATA + (config & 3));
break;
case 1:
- writeb(value, p->base + PCI_DATA + (config & 3));
+ writeb(value, p->base + FTPCI_DATA + (config & 3));
break;
default:
ret = PCIBIOS_BAD_REGISTER_NUMBER;
@@ -469,7 +469,7 @@ static int faraday_pci_probe(struct platform_device *pdev)
if (!faraday_res_to_memcfg(io->start - win->offset,
resource_size(io), &val)) {
/* setup I/O space size */
- writel(val, p->base + PCI_IOSIZE);
+ writel(val, p->base + FTPCI_IOSIZE);
} else {
dev_err(dev, "illegal IO mem size\n");
return -EINVAL;
@@ -477,11 +477,11 @@ static int faraday_pci_probe(struct platform_device *pdev)
}
/* Setup hostbridge */
- val = readl(p->base + PCI_CTRL);
+ val = readl(p->base + FTPCI_CTRL);
val |= PCI_COMMAND_IO;
val |= PCI_COMMAND_MEMORY;
val |= PCI_COMMAND_MASTER;
- writel(val, p->base + PCI_CTRL);
+ writel(val, p->base + FTPCI_CTRL);
/* Mask and clear all interrupts */
faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
if (variant->cascaded_irq) {
--
2.30.2
next parent reply other threads:[~2021-07-10 23:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210710235016.3221124-1-sashal@kernel.org>
2021-07-10 23:49 ` Sasha Levin [this message]
2021-07-10 23:49 ` [PATCH AUTOSEL 5.10 07/37] PCI: hv: Fix a race condition when removing the device Sasha Levin
2021-07-10 23:49 ` [PATCH AUTOSEL 5.10 11/37] PCI/P2PDMA: Avoid pci_get_slot(), which may sleep Sasha Levin
2021-07-10 23:49 ` [PATCH AUTOSEL 5.10 13/37] PCI: pciehp: Ignore Link Down/Up caused by DPC Sasha Levin
2021-07-10 23:49 ` [PATCH AUTOSEL 5.10 21/37] PCI: tegra: Add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-10 23:50 ` [PATCH AUTOSEL 5.10 33/37] PCI: rockchip: Register IRQ handlers after device and data are ready Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210710235016.3221124-5-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=kw@linux.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lkp@intel.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=rdunlap@infradead.org \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).