Re: [PATCH v2] PCI: pciehp: Quirk to ignore spurious DLLSC when off

["Raj, Ashok" <ashok.raj@intel.com>]

On Mon, Aug 23, 2021 at 12:49:19PM -0600, Derrick, Jonathan wrote:
> From: James Puthukattukaran <james.puthukattukaran@oracle.com>
> 
> When a specific x8 CEM card is bifurcated into x4x4 mode, and the
> upstream ports both support hotplugging on each respective x4 device, a
> slot management system for the CEM card requires both x4 devices to be
> sysfs removed from the OS before it can safely turn-off physical power.

sysfs removed from the OS seems a bit confusing.. Do you mean removed via
sysfs by echo 0 > power?

> The implications are that Slot Control will display Powered Off status
> for the device where the device is actually powered until both ports
> have powered off.
> 
> When power is removed from the first half, real power and link remains
> active while waiting for the second half to have power removed. When
> power is then removed from the second half, the first half starts
> shutdown sequence and will trigger a DLLSC event. This is misinterpreted
> as an enabling event and causes the first half to be re-enabled.
> 
> The spurious enable can be resolved by ignoring link status change
> events when no link is active when in the off state. This patch adds a
> quirk for the card.
> 
> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
> Signed-off-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
> ---
> v1->v2: Device-specific quirk
> 
>  drivers/pci/hotplug/pciehp_ctrl.c |  7 +++++++
>  drivers/pci/quirks.c              | 30 ++++++++++++++++++++++++++++++
>  include/linux/pci.h               |  1 +
>  3 files changed, 38 insertions(+)
> 
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 529c34808440..db41f78bfac8 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -225,6 +225,7 @@ void pciehp_handle_disable_request(struct controller *ctrl)
>  void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>  {
>  	int present, link_active;
> +	struct pci_dev *pdev = ctrl->pcie->port;
>  
>  	/*
>  	 * If the slot is on and presence or link has changed, turn it off.
> @@ -265,6 +266,12 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
>  		cancel_delayed_work(&ctrl->button_work);
>  		fallthrough;
>  	case OFF_STATE:
> +		if (pdev->shared_pcc_and_link_slot &&
> +		    (events & PCI_EXP_SLTSTA_DLLSC) && !link_active) {

Is it !link_active? Based on the explanation, until we turn off both slots
you would see link is still active correct? 

> +			mutex_unlock(&ctrl->state_lock);
> +			break;
> +		}
> +