From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 13/25] PCI: j721e: Add PCIe support for J7200
Date: Sat, 11 Sep 2021 09:13:00 -0400 [thread overview]
Message-ID: <20210911131312.285225-13-sashal@kernel.org> (raw)
In-Reply-To: <20210911131312.285225-1-sashal@kernel.org>
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ]
J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.
Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 973b309ac9ba..2f5a49c77074 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -25,6 +25,7 @@
#define STATUS_REG_SYS_2 0x508
#define STATUS_CLR_REG_SYS_2 0x708
#define LINK_DOWN BIT(1)
+#define J7200_LINK_DOWN BIT(10)
#define J721E_PCIE_USER_CMD_STATUS 0x4
#define LINK_TRAINING_ENABLE BIT(0)
@@ -54,6 +55,7 @@ struct j721e_pcie {
struct cdns_pcie *cdns_pcie;
void __iomem *user_cfg_base;
void __iomem *intd_cfg_base;
+ u32 linkdown_irq_regfield;
};
enum j721e_pcie_mode {
@@ -64,6 +66,9 @@ enum j721e_pcie_mode {
struct j721e_pcie_data {
enum j721e_pcie_mode mode;
unsigned int quirk_retrain_flag:1;
+ unsigned int quirk_detect_quiet_flag:1;
+ u32 linkdown_irq_regfield;
+ unsigned int byte_access_allowed:1;
};
static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -95,12 +100,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
u32 reg;
reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
- if (!(reg & LINK_DOWN))
+ if (!(reg & pcie->linkdown_irq_regfield))
return IRQ_NONE;
dev_err(dev, "LINK DOWN!\n");
- j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+ j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
return IRQ_HANDLED;
}
@@ -109,7 +114,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
u32 reg;
reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
- reg |= LINK_DOWN;
+ reg |= pcie->linkdown_irq_regfield;
j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
}
@@ -272,10 +277,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
static const struct j721e_pcie_data j721e_pcie_rc_data = {
.mode = PCI_MODE_RC,
.quirk_retrain_flag = true,
+ .byte_access_allowed = false,
+ .linkdown_irq_regfield = LINK_DOWN,
};
static const struct j721e_pcie_data j721e_pcie_ep_data = {
.mode = PCI_MODE_EP,
+ .linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+ .mode = PCI_MODE_RC,
+ .quirk_detect_quiet_flag = true,
+ .linkdown_irq_regfield = J7200_LINK_DOWN,
+ .byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+ .mode = PCI_MODE_EP,
+ .quirk_detect_quiet_flag = true,
};
static const struct of_device_id of_j721e_pcie_match[] = {
@@ -287,6 +307,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
.compatible = "ti,j721e-pcie-ep",
.data = &j721e_pcie_ep_data,
},
+ {
+ .compatible = "ti,j7200-pcie-host",
+ .data = &j7200_pcie_rc_data,
+ },
+ {
+ .compatible = "ti,j7200-pcie-ep",
+ .data = &j7200_pcie_ep_data,
+ },
{},
};
@@ -319,6 +347,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
pcie->dev = dev;
pcie->mode = mode;
+ pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
if (IS_ERR(base))
@@ -378,9 +407,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
goto err_get_sync;
}
- bridge->ops = &cdns_ti_pcie_host_ops;
+ if (!data->byte_access_allowed)
+ bridge->ops = &cdns_ti_pcie_host_ops;
rc = pci_host_bridge_priv(bridge);
rc->quirk_retrain_flag = data->quirk_retrain_flag;
+ rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
cdns_pcie = &rc->pcie;
cdns_pcie->dev = dev;
@@ -430,6 +461,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err_get_sync;
}
+ ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
cdns_pcie = &ep->pcie;
cdns_pcie->dev = dev;
--
2.30.2
next prev parent reply other threads:[~2021-09-11 13:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210911131312.285225-1-sashal@kernel.org>
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 03/25] PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 05/25] PCI: tegra194: Fix handling BME_CHGED event Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 06/25] PCI: tegra194: Fix MSI-X programming Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 07/25] PCI: tegra: Fix OF node reference leak Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 09/25] PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe() Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 11/25] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
2021-09-11 13:12 ` [PATCH AUTOSEL 5.10 12/25] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state Sasha Levin
2021-09-11 13:13 ` Sasha Levin [this message]
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 14/25] PCI: j721e: Add PCIe support for AM64 Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 15/25] PCI: Add ACS quirks for Cavium multi-function devices Sasha Levin
2021-09-11 13:13 ` [PATCH AUTOSEL 5.10 21/25] PCI: ibmphp: Fix double unmap of io_mem Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210911131312.285225-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).