From: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
To: helgaas@kernel.org
Cc: "Saheed O. Bolarinwa" <refactormyself@gmail.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
kw@linux.com
Subject: [RFC PATCH 2/3 v2] PCI/ASPM: Remove struct pcie_link_state.acceptable
Date: Thu, 16 Sep 2021 10:49:25 +0200 [thread overview]
Message-ID: <20210916084926.32614-3-refactormyself@gmail.com> (raw)
In-Reply-To: <20210916084926.32614-1-refactormyself@gmail.com>
The acceptable latencies for each device on the bus are calculated within
pcie_aspm_cap_init() and cached in struct pcie_link_state.acceptable. They
are only used in pcie_aspm_check_latency() to validate actual latencies.
Thus, it is possible to avoid caching these values.
This patch:
- removes `acceptable` from struct pcie_link_state
- calculates the acceptable latency for each device directly
- removes the calculations done within pcie_aspm_cap_init()
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
---
drivers/pci/pcie/aspm.c | 27 ++++++++-------------------
1 file changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 9e85dfc56657..0c0c055823f1 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -65,12 +65,6 @@ struct pcie_link_state {
u32 clkpm_enabled:1; /* Current Clock PM state */
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
u32 clkpm_disable:1; /* Clock PM disabled */
-
- /*
- * Endpoint acceptable latencies. A pcie downstream port only
- * has one slot under it, so at most there are 8 functions.
- */
- struct aspm_latency acceptable[8];
};
static int aspm_disabled, aspm_force;
@@ -389,7 +383,7 @@ static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
{
- u32 latency, lnkcap_up, lnkcap_dw, l1_switch_latency = 0;
+ u32 reg32, latency, encoding, lnkcap_up, lnkcap_dw, l1_switch_latency = 0;
struct pci_dev *downstream;
struct aspm_latency latency_up, latency_dw;
struct aspm_latency *acceptable;
@@ -402,7 +396,13 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
link = endpoint->bus->self->link_state;
downstream = pci_function_0(link->pdev->subordinate);
- acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
+ pcie_capability_read_dword(endpoint, PCI_EXP_DEVCAP, ®32);
+ /* Calculate endpoint L0s acceptable latency */
+ encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
+ acceptable->l0s = calc_l0s_acceptable(encoding);
+ /* Calculate endpoint L1 acceptable latency */
+ encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
+ acceptable->l1 = calc_l1_acceptable(encoding);
while (link) {
/* Read direction exit latencies */
@@ -664,22 +664,11 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
/* Get and check endpoint acceptable latencies */
list_for_each_entry(child, &linkbus->devices, bus_list) {
- u32 reg32, encoding;
- struct aspm_latency *acceptable =
- &link->acceptable[PCI_FUNC(child->devfn)];
if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
continue;
- pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32);
- /* Calculate endpoint L0s acceptable latency */
- encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
- acceptable->l0s = calc_l0s_acceptable(encoding);
- /* Calculate endpoint L1 acceptable latency */
- encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
- acceptable->l1 = calc_l1_acceptable(encoding);
-
pcie_aspm_check_latency(child);
}
}
--
2.20.1
next prev parent reply other threads:[~2021-09-16 8:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-16 8:49 [RFC PATCH 0/3 v2] PCI/ASPM: Remove struct aspm_latency Saheed O. Bolarinwa
2021-09-16 8:49 ` [RFC PATCH 1/3 v1] PCI/ASPM: Remove cached latencies in struct pcie_link_state Saheed O. Bolarinwa
2021-09-16 8:49 ` Saheed O. Bolarinwa [this message]
2021-09-30 23:52 ` [RFC PATCH 2/3 v2] PCI/ASPM: Remove struct pcie_link_state.acceptable Bjorn Helgaas
2021-09-16 8:49 ` [RFC PATCH 3/3 v1] PCI/ASPM: Remove struct aspm_latency Saheed O. Bolarinwa
2021-09-26 20:31 ` [RFC PATCH 0/3 v2] " Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210916084926.32614-3-refactormyself@gmail.com \
--to=refactormyself@gmail.com \
--cc=helgaas@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).