Re: [PATCH v2 4/4] s390/pci: implement minimal PCI error recovery

[Bjorn Helgaas <helgaas@kernel.org>]

On Thu, Sep 16, 2021 at 11:33:36AM +0200, Niklas Schnelle wrote:
> When the platform detects an error on a PCI function or a service action
> has been performed it is put in the error state and an error event
> notification is provided to the OS.
> 
> Currently we treat all error event notifications the same and simply set
> pdev->error_state = pci_channel_io_perm_failure requiring user
> intervention such as use of the recover attribute to get the device
> usable again. Despite requiring a manual step this also has the
> disadvantage that the device is completely torn down and recreated
> resulting in higher level devices such as a block or network device
> being recreated. In case of a block device this also means that it may
> need to be removed and added to a software raid even if that could
> otherwise survive with a temporary degradation.
> 
> This is of course not ideal more so since an error notification with PEC
> 0x3A indicates that the platform already performed error recovery
> successfully or that the error state was caused by a service action that
> is now finished.
> 
> At least in this case we can assume that the error state can be reset
> and the function made usable again. So as not to have the disadvantage
> of a full tear down and recreation we need to coordinate this recovery
> with the driver. Thankfully there is already a well defined recovery
> flow for this described in Documentation/PCI/pci-error-recovery.rst.
> 
> The implementation of this is somewhat straight forward and simplified
> by the fact that our recovery flow is defined per PCI function. As
> a reset we use the newly introduced zpci_hot_reset_device() which also
> takes the PCI function out of the error state.
> 
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
> v1 -> v2:
> - Dropped use of pci_dev_is_added(), pdev->driver check is enough
> - Improved some comments and messages
> 
>  arch/s390/include/asm/pci.h |   4 +-
>  arch/s390/pci/pci.c         |  49 ++++++++++
>  arch/s390/pci/pci_event.c   | 182 +++++++++++++++++++++++++++++++++++-
>  3 files changed, 233 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
> index 2a2ed165a270..558877aff2e5 100644
> --- a/arch/s390/include/asm/pci.h
> +++ b/arch/s390/include/asm/pci.h
> @@ -294,8 +294,10 @@ void zpci_debug_exit(void);
>  void zpci_debug_init_device(struct zpci_dev *, const char *);
>  void zpci_debug_exit_device(struct zpci_dev *);
>  
> -/* Error reporting */
> +/* Error handling */
>  int zpci_report_error(struct pci_dev *, struct zpci_report_error_header *);
> +int zpci_clear_error_state(struct zpci_dev *zdev);
> +int zpci_reset_load_store_blocked(struct zpci_dev *zdev);
>  
>  #ifdef CONFIG_NUMA
>  
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> index dce60f16e94a..b987c9d76510 100644
> --- a/arch/s390/pci/pci.c
> +++ b/arch/s390/pci/pci.c
> @@ -954,6 +954,55 @@ int zpci_report_error(struct pci_dev *pdev,
>  }
>  EXPORT_SYMBOL(zpci_report_error);
>  
> +/**
> + * zpci_clear_error_state() - Clears the zPCI error state of the device
> + * @zdev: The zdev for which the zPCI error state should be reset
> + *
> + * Clear the zPCI error state of the device. If clearing the zPCI error state
> + * fails the device is left in the error state. In this case it may make sense
> + * to call zpci_io_perm_failure() on the associated pdev if it exists.
> + *
> + * Returns: 0 on success, -EIO otherwise
> + */
> +int zpci_clear_error_state(struct zpci_dev *zdev)
> +{
> +	u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_ERROR);
> +	struct zpci_fib fib = {0};
> +	u8 status;
> +	int rc;
> +
> +	rc = zpci_mod_fc(req, &fib, &status);
> +	if (rc)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/**
> + * zpci_reset_load_store_blocked() - Re-enables L/S from error state
> + * @zdev: The zdev for which to unblock load/store access
> + *
> + * R-eenables load/store access for a PCI function in the error state while
> + * keeping DMA blocked. In this state drivers can poke MMIO space to determine
> + * if error recovery is possible while catching any rogue DMA access from the
> + * device.
> + *
> + * Returns: 0 on success, -EIO otherwise
> + */
> +int zpci_reset_load_store_blocked(struct zpci_dev *zdev)
> +{
> +	u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_BLOCK);
> +	struct zpci_fib fib = {0};
> +	u8 status;
> +	int rc;
> +
> +	rc = zpci_mod_fc(req, &fib, &status);
> +	if (rc)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
>  static int zpci_mem_init(void)
>  {
>  	BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) ||
> diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
> index e868d996ec5b..73389e161872 100644
> --- a/arch/s390/pci/pci_event.c
> +++ b/arch/s390/pci/pci_event.c
> @@ -47,15 +47,182 @@ struct zpci_ccdf_avail {
>  	u16 pec;			/* PCI event code */
>  } __packed;
>  
> +static inline bool ers_result_indicates_abort(pci_ers_result_t ers_res)
> +{
> +	switch (ers_res) {
> +	case PCI_ERS_RESULT_CAN_RECOVER:
> +	case PCI_ERS_RESULT_RECOVERED:
> +	case PCI_ERS_RESULT_NEED_RESET:
> +		return false;
> +	default:
> +		return true;
> +	}
> +}
> +
> +static pci_ers_result_t zpci_event_notify_error_detected(struct pci_dev *pdev)
> +{
> +	pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
> +	struct pci_driver *driver = pdev->driver;
> +
> +	pr_debug("%s: asking driver to determine recoverability\n", pci_name(pdev));
> +	ers_res = driver->err_handler->error_detected(pdev,  pdev->error_state);
> +	if (ers_result_indicates_abort(ers_res))
> +		pr_info("%s: driver can't recover\n", pci_name(pdev));
> +	else if (ers_res == PCI_ERS_RESULT_NEED_RESET)
> +		pr_debug("%s: driver needs reset to recover\n", pci_name(pdev));

Are you following a convention of using pr_info(), etc here?  I try to
use the pci_info() family (wrappers around dev_info()) whenever I can.