From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: pali@kernel.org, linux-pci@vger.kernel.org,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH v2 04/11] PCI: aardvark: Clear all MSIs at setup
Date: Tue, 30 Nov 2021 13:36:14 +0100 [thread overview]
Message-ID: <20211130123621.23062-5-kabel@kernel.org> (raw)
In-Reply-To: <20211130123621.23062-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT).
Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs,
to ensure that we don't start receiving spurious interrupts.
Use this new mask in advk_pcie_handle_msi();
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/pci/controller/pci-aardvark.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 25af189a1052..71ce9f02d596 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -116,6 +116,7 @@
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
+#define PCIE_MSI_ALL_MASK GENMASK(31, 0)
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
@@ -571,6 +572,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
/* Clear all interrupts */
+ advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG);
advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
@@ -583,7 +585,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
/* Unmask all MSIs */
- advk_writel(pcie, 0, PCIE_MSI_MASK_REG);
+ advk_writel(pcie, ~(u32)PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
/* Enable summary interrupt for GIC SPI source */
reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
@@ -1399,7 +1401,7 @@ static void advk_pcie_handle_msi(struct advk_pcie *pcie)
msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
- msi_status = msi_val & ~msi_mask;
+ msi_status = msi_val & ((~msi_mask) & PCIE_MSI_ALL_MASK);
for (msi_idx = 0; msi_idx < MSI_IRQ_NUM; msi_idx++) {
if (!(BIT(msi_idx) & msi_status))
--
2.32.0
next prev parent reply other threads:[~2021-11-30 12:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 12:36 [PATCH v2 00/11] PCI: aardvark controller fixes BATCH 3 Marek Behún
2021-11-30 12:36 ` [PATCH v2 01/11] PCI: pci-bridge-emul: Add description for class_revision field Marek Behún
2021-11-30 12:36 ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add definitions for missing capabilities registers Marek Behún
2021-11-30 12:43 ` Pali Rohár
2021-11-30 13:15 ` Marek Behún
2021-11-30 12:36 ` [PATCH v2 03/11] PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers on emulated bridge Marek Behún
2021-11-30 12:36 ` Marek Behún [this message]
2021-11-30 12:36 ` [PATCH v2 05/11] PCI: aardvark: Comment actions in driver remove method Marek Behún
2021-11-30 12:36 ` [PATCH v2 06/11] PCI: aardvark: Disable bus mastering when unbinding driver Marek Behún
2021-11-30 12:36 ` [PATCH v2 07/11] PCI: aardvark: Mask all interrupts " Marek Behún
2021-11-30 12:36 ` [PATCH v2 08/11] PCI: aardvark: Fix memory leak in driver unbind Marek Behún
2021-11-30 12:36 ` [PATCH v2 09/11] PCI: aardvark: Assert PERST# when unbinding driver Marek Behún
2021-11-30 12:36 ` [PATCH v2 10/11] PCI: aardvark: Disable link training " Marek Behún
2021-11-30 12:36 ` [PATCH v2 11/11] PCI: aardvark: Disable common PHY " Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211130123621.23062-5-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox