From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
Cc: linux-pci@vger.kernel.org, robh@kernel.org, bhelgaas@google.com,
minghuan.Lian@nxp.com, leoyang.li@nxp.com
Subject: Re: [PATCHv6] PCI: layerscape: Change to use the DWC common link-up check function
Date: Wed, 5 Jan 2022 15:33:16 +0000 [thread overview]
Message-ID: <20220105153316.GA7762@lpieralisi> (raw)
In-Reply-To: <20211224094000.8513-1-Zhiqiang.Hou@nxp.com>
On Fri, Dec 24, 2021 at 05:40:00PM +0800, Zhiqiang Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>
> The current Layerscape PCIe driver directly uses the physical layer
> LTSSM code to check the link-up state, which treats the > L0 states
> as link-up. This is not correct, since there is not explicit map
> between link-up state and LTSSM. So this patch changes to use the
> DWC common link-up check function.
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> V6:
> - This patch is splited from the V5 version of Layerscape PCIe Power
> Management support series.
> - Removed the driver data structure.
>
> drivers/pci/controller/dwc/pci-layerscape.c | 152 ++------------------
> 1 file changed, 11 insertions(+), 141 deletions(-)
Applied to pci/dwc, thanks.
Lorenzo
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index 5b9c625df7b8..6a4f0619bb1c 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -3,6 +3,7 @@
> * PCIe host controller driver for Freescale Layerscape SoCs
> *
> * Copyright (C) 2014 Freescale Semiconductor.
> + * Copyright 2021 NXP
> *
> * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
> */
> @@ -22,12 +23,6 @@
>
> #include "pcie-designware.h"
>
> -/* PEX1/2 Misc Ports Status Register */
> -#define SCFG_PEXMSCPORTSR(pex_idx) (0x94 + (pex_idx) * 4)
> -#define LTSSM_STATE_SHIFT 20
> -#define LTSSM_STATE_MASK 0x3f
> -#define LTSSM_PCIE_L0 0x11 /* L0 state */
> -
> /* PEX Internal Configuration Registers */
> #define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */
> #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */
> @@ -35,20 +30,8 @@
>
> #define PCIE_IATU_NUM 6
>
> -struct ls_pcie_drvdata {
> - u32 lut_offset;
> - u32 ltssm_shift;
> - u32 lut_dbg;
> - const struct dw_pcie_host_ops *ops;
> - const struct dw_pcie_ops *dw_pcie_ops;
> -};
> -
> struct ls_pcie {
> struct dw_pcie *pci;
> - void __iomem *lut;
> - struct regmap *scfg;
> - const struct ls_pcie_drvdata *drvdata;
> - int index;
> };
>
> #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> @@ -83,38 +66,6 @@ static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
> iowrite32(val, pci->dbi_base + PCIE_STRFMR1);
> }
>
> -static int ls1021_pcie_link_up(struct dw_pcie *pci)
> -{
> - u32 state;
> - struct ls_pcie *pcie = to_ls_pcie(pci);
> -
> - if (!pcie->scfg)
> - return 0;
> -
> - regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state);
> - state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
> -
> - if (state < LTSSM_PCIE_L0)
> - return 0;
> -
> - return 1;
> -}
> -
> -static int ls_pcie_link_up(struct dw_pcie *pci)
> -{
> - struct ls_pcie *pcie = to_ls_pcie(pci);
> - u32 state;
> -
> - state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
> - pcie->drvdata->ltssm_shift) &
> - LTSSM_STATE_MASK;
> -
> - if (state < LTSSM_PCIE_L0)
> - return 0;
> -
> - return 1;
> -}
> -
> /* Forward error response of outbound non-posted requests */
> static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> {
> @@ -139,96 +90,20 @@ static int ls_pcie_host_init(struct pcie_port *pp)
> return 0;
> }
>
> -static int ls1021_pcie_host_init(struct pcie_port *pp)
> -{
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> - struct ls_pcie *pcie = to_ls_pcie(pci);
> - struct device *dev = pci->dev;
> - u32 index[2];
> - int ret;
> -
> - pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
> - "fsl,pcie-scfg");
> - if (IS_ERR(pcie->scfg)) {
> - ret = PTR_ERR(pcie->scfg);
> - dev_err(dev, "No syscfg phandle specified\n");
> - pcie->scfg = NULL;
> - return ret;
> - }
> -
> - if (of_property_read_u32_array(dev->of_node,
> - "fsl,pcie-scfg", index, 2)) {
> - pcie->scfg = NULL;
> - return -EINVAL;
> - }
> - pcie->index = index[1];
> -
> - return ls_pcie_host_init(pp);
> -}
> -
> -static const struct dw_pcie_host_ops ls1021_pcie_host_ops = {
> - .host_init = ls1021_pcie_host_init,
> -};
> -
> static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> .host_init = ls_pcie_host_init,
> };
>
> -static const struct dw_pcie_ops dw_ls1021_pcie_ops = {
> - .link_up = ls1021_pcie_link_up,
> -};
> -
> -static const struct dw_pcie_ops dw_ls_pcie_ops = {
> - .link_up = ls_pcie_link_up,
> -};
> -
> -static const struct ls_pcie_drvdata ls1021_drvdata = {
> - .ops = &ls1021_pcie_host_ops,
> - .dw_pcie_ops = &dw_ls1021_pcie_ops,
> -};
> -
> -static const struct ls_pcie_drvdata ls1043_drvdata = {
> - .lut_offset = 0x10000,
> - .ltssm_shift = 24,
> - .lut_dbg = 0x7fc,
> - .ops = &ls_pcie_host_ops,
> - .dw_pcie_ops = &dw_ls_pcie_ops,
> -};
> -
> -static const struct ls_pcie_drvdata ls1046_drvdata = {
> - .lut_offset = 0x80000,
> - .ltssm_shift = 24,
> - .lut_dbg = 0x407fc,
> - .ops = &ls_pcie_host_ops,
> - .dw_pcie_ops = &dw_ls_pcie_ops,
> -};
> -
> -static const struct ls_pcie_drvdata ls2080_drvdata = {
> - .lut_offset = 0x80000,
> - .ltssm_shift = 0,
> - .lut_dbg = 0x7fc,
> - .ops = &ls_pcie_host_ops,
> - .dw_pcie_ops = &dw_ls_pcie_ops,
> -};
> -
> -static const struct ls_pcie_drvdata ls2088_drvdata = {
> - .lut_offset = 0x80000,
> - .ltssm_shift = 0,
> - .lut_dbg = 0x407fc,
> - .ops = &ls_pcie_host_ops,
> - .dw_pcie_ops = &dw_ls_pcie_ops,
> -};
> -
> static const struct of_device_id ls_pcie_of_match[] = {
> - { .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata },
> - { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
> - { .compatible = "fsl,ls1028a-pcie", .data = &ls2088_drvdata },
> - { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
> - { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
> - { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
> - { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
> - { .compatible = "fsl,ls2088a-pcie", .data = &ls2088_drvdata },
> - { .compatible = "fsl,ls1088a-pcie", .data = &ls2088_drvdata },
> + { .compatible = "fsl,ls1012a-pcie", },
> + { .compatible = "fsl,ls1021a-pcie", },
> + { .compatible = "fsl,ls1028a-pcie", },
> + { .compatible = "fsl,ls1043a-pcie", },
> + { .compatible = "fsl,ls1046a-pcie", },
> + { .compatible = "fsl,ls2080a-pcie", },
> + { .compatible = "fsl,ls2085a-pcie", },
> + { .compatible = "fsl,ls2088a-pcie", },
> + { .compatible = "fsl,ls1088a-pcie", },
> { },
> };
>
> @@ -247,11 +122,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
> if (!pci)
> return -ENOMEM;
>
> - pcie->drvdata = of_device_get_match_data(dev);
> -
> pci->dev = dev;
> - pci->ops = pcie->drvdata->dw_pcie_ops;
> - pci->pp.ops = pcie->drvdata->ops;
> + pci->pp.ops = &ls_pcie_host_ops;
>
> pcie->pci = pci;
>
> @@ -260,8 +132,6 @@ static int ls_pcie_probe(struct platform_device *pdev)
> if (IS_ERR(pci->dbi_base))
> return PTR_ERR(pci->dbi_base);
>
> - pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset;
> -
> if (!ls_pcie_is_bridge(pcie))
> return -ENODEV;
>
> --
> 2.17.1
>
next prev parent reply other threads:[~2022-01-05 15:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-24 9:40 [PATCHv6] PCI: layerscape: Change to use the DWC common link-up check function Zhiqiang Hou
2022-01-05 15:33 ` Lorenzo Pieralisi [this message]
2022-01-06 20:42 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220105153316.GA7762@lpieralisi \
--to=lorenzo.pieralisi@arm.com \
--cc=Zhiqiang.Hou@nxp.com \
--cc=bhelgaas@google.com \
--cc=leoyang.li@nxp.com \
--cc=linux-pci@vger.kernel.org \
--cc=minghuan.Lian@nxp.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox