linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: linux-pci@vger.kernel.org
Cc: "Bharat Kumar Gogada" <bharat.kumar.gogada@xilinx.com>,
	"Bjorn Helgaas" <helgaas@kernel.org>,
	"Pali Rohár" <pali@kernel.org>,
	"Michal Simek" <michal.simek@xilinx.com>
Subject: [PATCH v4 2/2] PCI: xilinx-nwl: Add method to init_platform_service_irqs hook
Date: Fri, 14 Jan 2022 08:58:34 +0100	[thread overview]
Message-ID: <20220114075834.1938409-3-sr@denx.de> (raw)
In-Reply-To: <20220114075834.1938409-1-sr@denx.de>

From: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>

Add nwl_init_platform_service_irqs() hook to init_platform_service_irqs
to register the platform-specific Service Errors IRQs for this PCIe
controller to fully support e.g. AER on this platform.

Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 414b679175b3..540536bbe3f8 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -24,6 +24,7 @@
 #include <linux/irqchip/chained_irq.h>
 
 #include "../pci.h"
+#include "../pcie/portdrv.h"
 
 /* Bridge core config registers */
 #define BRCFG_PCIE_RX0			0x00000000
@@ -806,6 +807,22 @@ static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
 	return 0;
 }
 
+static int nwl_init_platform_service_irqs(struct pci_dev *dev, int *irqs,
+					  int plat_mask)
+{
+	struct pci_host_bridge *bridge;
+	struct nwl_pcie *pcie;
+
+	bridge = pci_find_host_bridge(dev->bus);
+	pcie = pci_host_bridge_priv(bridge);
+	if (plat_mask & PCIE_PORT_SERVICE_AER) {
+		irqs[PCIE_PORT_SERVICE_AER_SHIFT] = pcie->irq_misc;
+		return 0; /* platform-specific service IRQ installed */
+	}
+
+	return -ENODEV; /* platform-specific service IRQ not installed */
+}
+
 static const struct of_device_id nwl_pcie_of_match[] = {
 	{ .compatible = "xlnx,nwl-pcie-2.11", },
 	{}
@@ -857,6 +874,7 @@ static int nwl_pcie_probe(struct platform_device *pdev)
 
 	bridge->sysdata = pcie;
 	bridge->ops = &nwl_pcie_ops;
+	bridge->init_platform_service_irqs = nwl_init_platform_service_irqs;
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		err = nwl_pcie_enable_msi(pcie);
-- 
2.34.1


  parent reply	other threads:[~2022-01-14  7:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14  7:58 [PATCH v4 0/2] Add support to register platform service IRQ Stefan Roese
2022-01-14  7:58 ` [PATCH v4 1/2] PCI/portdrv: Add option to setup IRQs for platform-specific Service Errors Stefan Roese
2022-01-14 11:46   ` Pali Rohár
2022-05-28  0:09   ` Bjorn Helgaas
2022-05-30  8:18     ` Stefan Roese
2022-05-30  8:32       ` Pali Rohár
2022-05-31 21:31         ` Bjorn Helgaas
2022-05-31 22:57           ` Pali Rohár
2022-06-01 11:47           ` Stefan Roese
2022-06-01 11:53             ` Pali Rohár
2022-06-08 18:39             ` Bjorn Helgaas
2022-01-14  7:58 ` Stefan Roese [this message]
2022-01-14 11:48   ` [PATCH v4 2/2] PCI: xilinx-nwl: Add method to init_platform_service_irqs hook Pali Rohár
2022-01-14 12:13     ` Stefan Roese
2022-01-14 12:34       ` Pali Rohár
2022-01-14 17:03         ` Stefan Roese
2022-03-24 16:52 ` [PATCH v4 0/2] Add support to register platform service IRQ Stefan Roese
2022-03-31 15:30   ` Bjorn Helgaas
2022-04-01  6:28     ` Stefan Roese
2022-04-01 12:35       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114075834.1938409-3-sr@denx.de \
    --to=sr@denx.de \
    --cc=bharat.kumar.gogada@xilinx.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=pali@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).