From: Bjorn Helgaas <helgaas@kernel.org>
To: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Cc: Mark Tomlinson <Mark.Tomlinson@alliedtelesis.co.nz>,
"ray.jui@broadcom.com" <ray.jui@broadcom.com>,
"sbranden@broadcom.com" <sbranden@broadcom.com>,
"f.fainelli@gmail.com" <f.fainelli@gmail.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"robh@kernel.org" <robh@kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4] PCI: Reduce warnings on possible RW1C corruption
Date: Fri, 4 Mar 2022 16:01:27 -0600 [thread overview]
Message-ID: <20220304220127.GA1058143@bhelgaas> (raw)
In-Reply-To: <679ac5f4-d6b7-5c94-39d5-441c68576911@alliedtelesis.co.nz>
On Fri, Mar 04, 2022 at 01:30:29AM +0000, Chris Packham wrote:
> Hi All,
>
> On 21/08/20 10:11, Bjorn Helgaas wrote:
> > On Thu, Aug 06, 2020 at 04:14:55PM +1200, Mark Tomlinson wrote:
> >> For hardware that only supports 32-bit writes to PCI there is the
> >> possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
> >> messages was introduced by fb2659230120, but rate-limiting is not the
> >> best choice here. Some devices may not show the warnings they should if
> >> another device has just produced a bunch of warnings. Also, the number
> >> of messages can be a nuisance on devices which are otherwise working
> >> fine.
> >>
> >> This patch changes the ratelimit to a single warning per bus. This
> >> ensures no bus is 'starved' of emitting a warning and also that there
> >> isn't a continuous stream of warnings. It would be preferable to have a
> >> warning per device, but the pci_dev structure is not available here, and
> >> a lookup from devfn would be far too slow.
> >>
> >> Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
> >> Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
> >> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
> > Applied with collected reviews/acks to pci/enumeration for v5.10,
> > thanks!
>
> Whatever happened to this change?
>
> I'm just going through our queue of patches that have been sent upstream
> and expected this one to be gone after we pulled v5.10. Looking at
> Linus's tree I don't see it ever having been applied. I couldn't see
> anything on the relevant mailing lists suggesting that there was a
> problem with this change so I'm just wondering what's happened to it?
Sorry, I blew it somehow and dropped it. I applied it again for
v5.18. Thanks for noticing!
> >> ---
> >> changes in v4:
> >> - Use bitfield rather than bool to save memory (was meant to be in v3).
> >>
> >> drivers/pci/access.c | 9 ++++++---
> >> include/linux/pci.h | 1 +
> >> 2 files changed, 7 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> >> index 79c4a2ef269a..b452467fd133 100644
> >> --- a/drivers/pci/access.c
> >> +++ b/drivers/pci/access.c
> >> @@ -160,9 +160,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
> >> * write happen to have any RW1C (write-one-to-clear) bits set, we
> >> * just inadvertently cleared something we shouldn't have.
> >> */
> >> - dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
> >> - size, pci_domain_nr(bus), bus->number,
> >> - PCI_SLOT(devfn), PCI_FUNC(devfn), where);
> >> + if (!bus->unsafe_warn) {
> >> + dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
> >> + size, pci_domain_nr(bus), bus->number,
> >> + PCI_SLOT(devfn), PCI_FUNC(devfn), where);
> >> + bus->unsafe_warn = 1;
> >> + }
> >>
> >> mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
> >> tmp = readl(addr) & mask;
> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >> index 34c1c4f45288..85211a787f8b 100644
> >> --- a/include/linux/pci.h
> >> +++ b/include/linux/pci.h
> >> @@ -626,6 +626,7 @@ struct pci_bus {
> >> struct bin_attribute *legacy_io; /* Legacy I/O for this bus */
> >> struct bin_attribute *legacy_mem; /* Legacy mem */
> >> unsigned int is_added:1;
> >> + unsigned int unsafe_warn:1; /* warned about RW1C config write */
> >> };
> >>
> >> #define to_pci_bus(n) container_of(n, struct pci_bus, dev)
> >> --
> >> 2.28.0
> >>
prev parent reply other threads:[~2022-03-04 22:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-06 4:14 [PATCH v4] PCI: Reduce warnings on possible RW1C corruption Mark Tomlinson
2020-08-06 17:55 ` Scott Branden
2020-08-06 18:34 ` Florian Fainelli
2020-08-14 17:45 ` Rob Herring
2020-08-20 22:11 ` Bjorn Helgaas
2022-03-04 1:30 ` Chris Packham
2022-03-04 22:01 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304220127.GA1058143@bhelgaas \
--to=helgaas@kernel.org \
--cc=Chris.Packham@alliedtelesis.co.nz \
--cc=Mark.Tomlinson@alliedtelesis.co.nz \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=ray.jui@broadcom.com \
--cc=robh@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).