From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 53654C433EF for ; Mon, 11 Apr 2022 16:50:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237797AbiDKQxH (ORCPT ); Mon, 11 Apr 2022 12:53:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57674 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235426AbiDKQxG (ORCPT ); Mon, 11 Apr 2022 12:53:06 -0400 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id E487C33E96 for ; Mon, 11 Apr 2022 09:50:51 -0700 (PDT) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 596481424; Mon, 11 Apr 2022 09:50:51 -0700 (PDT) Received: from lpieralisi (unknown [10.57.6.174]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 121613F73B; Mon, 11 Apr 2022 09:50:47 -0700 (PDT) Date: Mon, 11 Apr 2022 17:50:41 +0100 From: Lorenzo Pieralisi To: Francesco Dolcini Cc: Richard Zhu , Lucas Stach , Rob Herring , Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Shawn Guo , Sascha Hauer , Bjorn Helgaas , linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, pali@kernel.org Subject: Re: [PATCH v3] PCI: imx6: Fix PERST# start-up sequence Message-ID: <20220411165031.GA28780@lpieralisi> References: <20220404081509.94356-1-francesco.dolcini@toradex.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20220404081509.94356-1-francesco.dolcini@toradex.com> User-Agent: Mutt/1.9.4 (2018-02-28) Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org [CC'ed Pali, who is working on PERST consolidation] On Mon, Apr 04, 2022 at 10:15:09AM +0200, Francesco Dolcini wrote: > According to the PCIe standard the PERST# signal (reset-gpio in > fsl,imx* compatible dts) should be kept asserted for at least 100 usec > before the PCIe refclock is stable, should be kept asserted for at > least 100 msec after the power rails are stable and the host should wait > at least 100 msec after it is de-asserted before accessing the > configuration space of any attached device. > > From PCIe CEM r2.0, sec 2.6.2 > > T-PVPERL: Power stable to PERST# inactive - 100 msec > T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec. > > From PCIe r5.0, sec 6.6.1 > > With a Downstream Port that does not support Link speeds greater than > 5.0 GT/s, software must wait a minimum of 100 ms before sending a > Configuration Request to the device immediately below that Port. > > Failure to do so could prevent PCIe devices to be working correctly, > and this was experienced with real devices. > > Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure > that PERST# is asserted before enabling any clock, move de-assert to the > end of imx6_pcie_deassert_core_reset() after the clock is enabled and > deemed stable and add a new delay of 100 msec just afterward. > > Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com > Fixes: bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") > Signed-off-by: Francesco Dolcini > Acked-by: Richard Zhu > > --- > v3: Add Acked-by: Richard Zhu > v2: Add complete reference to the PCIe standards, s/PCI-E/PCIe/g > --- > drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++--------- > 1 file changed, 14 insertions(+), 9 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index 6619e3caffe2..7a285fb0f619 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -408,6 +408,11 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) > dev_err(dev, "failed to disable vpcie regulator: %d\n", > ret); > } > + > + /* Some boards don't have PCIe reset GPIO. */ > + if (gpio_is_valid(imx6_pcie->reset_gpio)) > + gpio_set_value_cansleep(imx6_pcie->reset_gpio, > + imx6_pcie->gpio_active_high); > } > > static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) > @@ -540,15 +545,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > /* allow the clocks to stabilize */ > usleep_range(200, 500); > > - /* Some boards don't have PCIe reset GPIO. */ > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > - imx6_pcie->gpio_active_high); > - msleep(100); > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > - !imx6_pcie->gpio_active_high); > - } > - > switch (imx6_pcie->drvdata->variant) { > case IMX8MQ: > reset_control_deassert(imx6_pcie->pciephy_reset); > @@ -595,6 +591,15 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > break; > } > > + /* Some boards don't have PCIe reset GPIO. */ > + if (gpio_is_valid(imx6_pcie->reset_gpio)) { > + msleep(100); > + gpio_set_value_cansleep(imx6_pcie->reset_gpio, > + !imx6_pcie->gpio_active_high); > + /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ > + msleep(100); > + } > + > return; > > err_ref_clk: > -- > 2.25.1 >