linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: bhelgaas@google.com, lorenzo.pieralisi@arm.com,
	kbusch@kernel.org, hch@lst.de, linux-nvme@lists.infradead.org,
	linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, svarbanov@mm-sol.com,
	bjorn.andersson@linaro.org, axboe@fb.com,
	quic_vbadigan@quicinc.com, quic_krichai@quicinc.com,
	quic_nitirawa@quicinc.com, vidyas@nvidia.com, sagi@grimberg.me
Subject: Re: [PATCH 2/3] PCI: dwc: qcom: Set suspend_poweroff flag for SC7280
Date: Mon, 16 May 2022 15:19:50 -0500	[thread overview]
Message-ID: <20220516201950.GA1047412@bhelgaas> (raw)
In-Reply-To: <20220513110027.31015-3-manivannan.sadhasivam@linaro.org>

On Fri, May 13, 2022 at 04:30:26PM +0530, Manivannan Sadhasivam wrote:
> For aggressive power saving on SC7280 SoCs, the power for the PCI devices
> will be taken off during system suspend. Hence, notify the same to the
> PCI device drivers using "suspend_poweroff" flag so that the drivers can
> prepare the PCI devices to handle the poweroff and recover them during
> resume.

No doubt "power ... will be taken off during system suspend" is true,
but this isn't very informative.  Is this a property of SC7280?  A
choice made by the SC7280 driver?  Why is this not applicable to other
systems?

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 6ab90891801d..4b0ad2827f8f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -199,6 +199,7 @@ struct qcom_pcie_cfg {
>  	unsigned int has_ddrss_sf_tbu_clk:1;
>  	unsigned int has_aggre0_clk:1;
>  	unsigned int has_aggre1_clk:1;
> +	unsigned int suspend_poweroff:1;
>  };
>  
>  struct qcom_pcie {
> @@ -1220,6 +1221,10 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	if (pcie->cfg->pipe_clk_need_muxing)
>  		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
>  
> +	/* Indicate PCI device drivers that the power will be taken off during system suspend */
> +	if (pcie->cfg->suspend_poweroff)
> +		pci->pp.bridge->suspend_poweroff = true;
> +
>  	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
>  	if (ret < 0)
>  		goto err_disable_regulators;
> @@ -1548,6 +1553,7 @@ static const struct qcom_pcie_cfg sc7280_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_tbu_clk = true,
>  	.pipe_clk_need_muxing = true,
> +	.suspend_poweroff = true,
>  };
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {
> -- 
> 2.25.1
> 

  reply	other threads:[~2022-05-16 20:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 11:00 [PATCH 0/3] PCI: Notify PCI drivers about powerdown during suspend Manivannan Sadhasivam
2022-05-13 11:00 ` [PATCH 1/3] PCI: Add a flag to notify " Manivannan Sadhasivam
2022-05-16 20:18   ` Bjorn Helgaas
2022-05-17 15:09     ` Manivannan Sadhasivam
2022-05-17 17:24       ` Bjorn Helgaas
2022-05-18  3:59         ` Manivannan Sadhasivam
2022-05-26 20:48     ` Rob Herring
2022-05-13 11:00 ` [PATCH 2/3] PCI: dwc: qcom: Set suspend_poweroff flag for SC7280 Manivannan Sadhasivam
2022-05-16 20:19   ` Bjorn Helgaas [this message]
2022-05-17 15:11     ` Manivannan Sadhasivam
2022-05-17 17:18       ` Bjorn Helgaas
2022-05-18  3:52         ` Manivannan Sadhasivam
2022-05-18 16:50           ` Bjorn Helgaas
2022-05-18  8:43     ` Christoph Hellwig
2022-05-13 11:00 ` [PATCH 3/3] nvme-pci: Make use of "suspend_poweroff" flag during system suspend Manivannan Sadhasivam
2022-05-16  5:44 ` [PATCH 0/3] PCI: Notify PCI drivers about powerdown during suspend Christoph Hellwig
2022-05-16 20:15 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516201950.GA1047412@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=axboe@fb.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=quic_krichai@quicinc.com \
    --cc=quic_nitirawa@quicinc.com \
    --cc=quic_vbadigan@quicinc.com \
    --cc=sagi@grimberg.me \
    --cc=svarbanov@mm-sol.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).