[PATCH 2/2] PCI: dwc: exynos: Correct generic PHY usage

[Marek Szyprowski <m.szyprowski@samsung.com>]

The proper initialization for generic PHYs is to call first phy_init(),
then phy_power_on().

While touching this, lets remove the phy_reset() call. It is just a
left-over from the obsoleted Exynos5440 support and current exynos-pcie
PHY driver doesn't even support this function. It is also rarely used by
other drivers.

Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
The exynos-pcie PHY driver has been adjusted for this change in the
previous patch.
---
 drivers/pci/controller/dwc/pci-exynos.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index 467c8d1cd7e4..0d490ae52874 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -258,9 +258,8 @@ static int exynos_pcie_host_init(struct pcie_port *pp)
 
 	exynos_pcie_assert_core_reset(ep);
 
-	phy_reset(ep->phy);
-	phy_power_on(ep->phy);
 	phy_init(ep->phy);
+	phy_power_on(ep->phy);
 
 	exynos_pcie_deassert_core_reset(ep);
 	exynos_pcie_enable_irq_pulse(ep);
-- 
2.17.1