From: Bjorn Helgaas <helgaas@kernel.org>
To: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Cc: bhelgaas@google.com, kw@linux.com, os.vaslot@gmail.com,
makvihas@gmail.com, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI: ibmphp: Adjusting the parameter list of a function
Date: Thu, 18 Aug 2022 18:07:55 -0500 [thread overview]
Message-ID: <20220818230755.GA2403414@bhelgaas> (raw)
In-Reply-To: <20220814151956.16950-1-abd.masalkhi@gmail.com>
On Sun, Aug 14, 2022 at 05:19:56PM +0200, Abd-Alrhman Masalkhi wrote:
> ibmphp_init_devno() takes a struct slot **, and it should be changed
> to take struct slot * instead.
The commit log needs to explain *why* it should be changed from
"struct slot **" to "struct slot *".
And the subject line should give a clue about that, too.
Both subject and commit log should be "imperative," e.g., they should
read as if you were giving a command. "PCI: ibmphp: Convert ..."
This commit log says what *should* happen. It should read as though
it's a command carried out by the commit: "Convert 'struct slot **' to
'struct slot *' because ..."
> Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
> ---
> drivers/pci/hotplug/TODO | 3 ---
> drivers/pci/hotplug/ibmphp.h | 3 ++-
> drivers/pci/hotplug/ibmphp_core.c | 30 +++++++++++++++---------------
> drivers/pci/hotplug/ibmphp_ebda.c | 2 +-
> 4 files changed, 18 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pci/hotplug/TODO b/drivers/pci/hotplug/TODO
> index 88f217c82b4f..63a9fed407ed 100644
> --- a/drivers/pci/hotplug/TODO
> +++ b/drivers/pci/hotplug/TODO
> @@ -30,9 +30,6 @@ ibmphp:
> or ibmphp should store a pointer to its bus in struct slot. Probably the
> former.
>
> -* ibmphp_init_devno() takes a struct slot **, it could instead take a
> - struct slot *.
> -
> * The return value of pci_hp_register() is not checked.
>
> * The various slot data structures are difficult to follow and need to be
> diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
> index 0399c60d2ec1..148a421eb262 100644
> --- a/drivers/pci/hotplug/ibmphp.h
> +++ b/drivers/pci/hotplug/ibmphp.h
> @@ -734,7 +734,8 @@ struct controller {
>
> /* Functions */
>
> -int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
> +/* ibmphp_init_devno() is called from EBDA, so we need it not be static */
> +int ibmphp_init_devno(struct slot *cur_slot);
> int ibmphp_do_disable_slot(struct slot *slot_cur);
> int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be static */
> int ibmphp_configure_card(struct pci_func *, u8);
> diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
> index 197997e264a2..107752b11f2c 100644
> --- a/drivers/pci/hotplug/ibmphp_core.c
> +++ b/drivers/pci/hotplug/ibmphp_core.c
> @@ -109,7 +109,7 @@ static int __init get_max_slots(void)
> * Parameters: struct slot
> * Returns 0 or errors
> */
> -int ibmphp_init_devno(struct slot **cur_slot)
> +int ibmphp_init_devno(struct slot *cur_slot)
> {
> struct irq_routing_table *rtable;
> int len;
> @@ -130,21 +130,21 @@ int ibmphp_init_devno(struct slot **cur_slot)
> return -1;
> }
> for (loop = 0; loop < len; loop++) {
> - if ((*cur_slot)->number == rtable->slots[loop].slot &&
> - (*cur_slot)->bus == rtable->slots[loop].bus) {
> - (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
> + if (cur_slot->number == rtable->slots[loop].slot &&
> + cur_slot->bus == rtable->slots[loop].bus) {
> + cur_slot->device = PCI_SLOT(rtable->slots[loop].devfn);
> for (i = 0; i < 4; i++)
> - (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
> - (int) (*cur_slot)->device, i);
> -
> - debug("(*cur_slot)->irq[0] = %x\n",
> - (*cur_slot)->irq[0]);
> - debug("(*cur_slot)->irq[1] = %x\n",
> - (*cur_slot)->irq[1]);
> - debug("(*cur_slot)->irq[2] = %x\n",
> - (*cur_slot)->irq[2]);
> - debug("(*cur_slot)->irq[3] = %x\n",
> - (*cur_slot)->irq[3]);
> + cur_slot->irq[i] = IO_APIC_get_PCI_irq_vector((int) cur_slot->bus,
> + (int) cur_slot->device, i);
> +
> + debug("cur_slot->irq[0] = %x\n",
> + cur_slot->irq[0]);
> + debug("cur_slot->irq[1] = %x\n",
> + cur_slot->irq[1]);
> + debug("cur_slot->irq[2] = %x\n",
> + cur_slot->irq[2]);
> + debug("cur_slot->irq[3] = %x\n",
> + cur_slot->irq[3]);
>
> debug("rtable->exclusive_irqs = %x\n",
> rtable->exclusive_irqs);
> diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
> index 7fb75401ad8a..5c7821ad9c2c 100644
> --- a/drivers/pci/hotplug/ibmphp_ebda.c
> +++ b/drivers/pci/hotplug/ibmphp_ebda.c
> @@ -880,7 +880,7 @@ static int __init ebda_rsrc_controller(void)
> if (rc)
> goto error;
>
> - rc = ibmphp_init_devno(&tmp_slot);
> + rc = ibmphp_init_devno(tmp_slot);
> if (rc)
> goto error;
> tmp_slot->hotplug_slot.ops = &ibmphp_hotplug_slot_ops;
> --
> 2.29.0.rc1.dirty
>
next prev parent reply other threads:[~2022-08-18 23:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-14 15:19 [PATCH] PCI: ibmphp: Adjusting the parameter list of a function Abd-Alrhman Masalkhi
2022-08-18 23:07 ` Bjorn Helgaas [this message]
2022-08-19 12:38 ` [PATCH v2] PCI: ibmphp: Convert from double pointer to single pointer parameter Abd-Alrhman Masalkhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220818230755.GA2403414@bhelgaas \
--to=helgaas@kernel.org \
--cc=abd.masalkhi@gmail.com \
--cc=bhelgaas@google.com \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=makvihas@gmail.com \
--cc=os.vaslot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox