Re: [PATCH v1 3/4] PCI: qcom: Setup PHY to work in RC mode

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Tue, Jul 26, 2022 at 11:34:00PM +0300, Dmitry Baryshkov wrote:
> Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
> used in the RC mode.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 93d75cda4b04..f85f2579c087 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1485,6 +1485,10 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
>  	if (ret)
>  		return ret;
>  
> +	ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, 0);
> +	if (ret)
> +		return err_deinit;
> +
>  	ret = phy_power_on(pcie->phy);
>  	if (ret)
>  		goto err_deinit;
> -- 
> 2.35.1
> 

-- 
மணிவண்ணன் சதாசிவம்