From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>,
Rajvi Jingar <rajvi.jingar@linux.intel.com>,
"Rafael J . Wysocki" <rafael@kernel.org>
Cc: Koba Ko <koba.ko@canonical.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
"David E . Box" <david.e.box@linux.intel.com>,
Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@linux.intel.com>,
linux-pci@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v3 04/10] PCI/PTM: Separate configuration and enable
Date: Tue, 6 Sep 2022 17:23:45 -0500 [thread overview]
Message-ID: <20220906222351.64760-5-helgaas@kernel.org> (raw)
In-Reply-To: <20220906222351.64760-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
PTM configuration and enabling were previously mixed together:
pci_ptm_init() collected granularity info and enabled PTM for Root Ports
and Switch Upstream Ports; pci_enable_ptm() did the same for Endpoints.
Move everything related to the PTM Capability register to pci_ptm_init()
for all devices, and everything related to the PTM Control register to
pci_enable_ptm().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pcie/ptm.c | 81 ++++++++++++++----------------------------
1 file changed, 27 insertions(+), 54 deletions(-)
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
index 8729c3e452ee..ac51cd84793f 100644
--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -102,22 +102,12 @@ static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev)
void pci_ptm_init(struct pci_dev *dev)
{
int ptm;
- u32 cap, ctrl;
- u8 local_clock;
+ u32 cap;
struct pci_dev *ups;
if (!pci_is_pcie(dev))
return;
- /*
- * Enable PTM only on interior devices (root ports, switch ports,
- * etc.) on the assumption that it causes no link traffic until an
- * endpoint enables it.
- */
- if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT ||
- pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END))
- return;
-
ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return;
@@ -126,76 +116,59 @@ void pci_ptm_init(struct pci_dev *dev)
pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_PTM, sizeof(u16));
pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
+ dev->ptm_granularity = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
/*
- * There's no point in enabling PTM unless it's enabled in the
- * upstream device or this device can be a PTM Root itself. Per
- * the spec recommendation (PCIe r3.1, sec 7.32.3), select the
+ * Per the spec recommendation (PCIe r6.0, sec 7.9.15.3), select the
* furthest upstream Time Source as the PTM Root.
*/
ups = pci_upstream_ptm(dev);
- if (ups && ups->ptm_enabled) {
- ctrl = PCI_PTM_CTRL_ENABLE;
+ if (ups) {
if (ups->ptm_granularity == 0)
dev->ptm_granularity = 0;
- else if (ups->ptm_granularity > local_clock)
+ else if (ups->ptm_granularity > dev->ptm_granularity)
dev->ptm_granularity = ups->ptm_granularity;
- } else {
- if (cap & PCI_PTM_CAP_ROOT) {
- ctrl = PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT;
- dev->ptm_root = 1;
- dev->ptm_granularity = local_clock;
- } else
- return;
+ } else if (cap & PCI_PTM_CAP_ROOT) {
+ dev->ptm_root = 1;
+ } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
+
+ /*
+ * Per sec 7.9.15.3, this should be the Local Clock
+ * Granularity of the associated Time Source. But it
+ * doesn't say how to find that Time Source.
+ */
+ dev->ptm_granularity = 0;
}
- ctrl |= dev->ptm_granularity << 8;
- pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
- dev->ptm_enabled = 1;
-
- pci_ptm_info(dev);
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+ pci_pcie_type(dev) == PCI_EXP_TYPE_UPSTREAM)
+ pci_enable_ptm(dev, NULL);
}
int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
{
- int ptm;
- u32 cap, ctrl;
+ int ptm = dev->ptm_cap;
struct pci_dev *ups;
+ u32 ctrl;
- if (!pci_is_pcie(dev))
- return -EINVAL;
-
- ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return -EINVAL;
- dev->ptm_cap = ptm;
- pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- if (!(cap & PCI_PTM_CAP_REQ))
- return -EINVAL;
-
/*
- * For a PCIe Endpoint, PTM is only useful if the endpoint can
- * issue PTM requests to upstream devices that have PTM enabled.
- *
- * For Root Complex Integrated Endpoints, there is no upstream
- * device, so there must be some implementation-specific way to
- * associate the endpoint with a time source.
+ * If this device is not a PTM Root, the upstream link partner must
+ * have PTM enabled before we can enable PTM.
*/
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT) {
+ if (!dev->ptm_root) {
ups = pci_upstream_ptm(dev);
if (!ups || !ups->ptm_enabled)
return -EINVAL;
-
- dev->ptm_granularity = ups->ptm_granularity;
- } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
- dev->ptm_granularity = 0;
- } else
- return -EINVAL;
+ }
ctrl = PCI_PTM_CTRL_ENABLE;
ctrl |= dev->ptm_granularity << 8;
+ if (dev->ptm_root)
+ ctrl |= PCI_PTM_CTRL_ROOT;
+
pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
dev->ptm_enabled = 1;
--
2.25.1
next prev parent reply other threads:[~2022-09-06 22:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-06 22:23 [PATCH v3 00/10] PCI/PM: Always disable PTM for all devices during suspend Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 01/10] PCI/PTM: Preserve PTM Root Select Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 02/10] PCI/PTM: Cache PTM Capability offset Bjorn Helgaas
2022-09-06 23:18 ` Sathyanarayanan Kuppuswamy
2022-09-07 15:49 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 03/10] PCI/PTM: Add pci_upstream_ptm() helper Bjorn Helgaas
2022-09-06 22:23 ` Bjorn Helgaas [this message]
2022-09-07 5:25 ` [PATCH v3 04/10] PCI/PTM: Separate configuration and enable Mika Westerberg
2022-09-06 22:23 ` [PATCH v3 05/10] PCI/PTM: Add pci_disable_ptm() wrapper Bjorn Helgaas
2022-09-07 5:28 ` Mika Westerberg
2022-09-07 21:12 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 06/10] PCI/PTM: Add pci_enable_ptm() wrapper Bjorn Helgaas
2022-09-07 5:29 ` Mika Westerberg
2022-09-08 20:18 ` Sathyanarayanan Kuppuswamy
2022-09-06 22:23 ` [PATCH v3 07/10] PCI/PTM: Add suspend/resume Bjorn Helgaas
2022-09-07 5:30 ` Mika Westerberg
2022-09-07 16:44 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 08/10] PCI/PTM: Move pci_ptm_info() body into its only caller Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 09/10] PCI/PTM: Reorder functions in logical order Bjorn Helgaas
2022-09-08 20:15 ` Sathyanarayanan Kuppuswamy
2022-09-08 20:58 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 10/10] PCI/PM: Always disable PTM for all devices during suspend Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220906222351.64760-5-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=david.e.box@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rafael@kernel.org \
--cc=rajvi.jingar@linux.intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).