From: Bjorn Helgaas <helgaas@kernel.org>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Lukas Wunner <lukas@wunner.de>,
Chris Chiu <chris.chiu@canonical.com>,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v2 0/6] PCI: Allow for future resource expansion on initial root bus scan
Date: Wed, 21 Sep 2022 14:52:58 -0500 [thread overview]
Message-ID: <20220921195258.GA1232632@bhelgaas> (raw)
In-Reply-To: <20220905080232.36087-1-mika.westerberg@linux.intel.com>
On Mon, Sep 05, 2022 at 11:02:26AM +0300, Mika Westerberg wrote:
> Hi,
>
> The series works around an issue found on some Dell systems where
> booting with Thunderbolt/USB4 devices connected the BIOS leaves some of
> the PCIe devices unconfigured. If the connected devices that are not
> configured have PCIe hotplug ports as well the initial root bus scan
> only reserves the minimum amount of resources to them making any
> expansion happening later impossible.
>
> We do already distribute the "spare" resources between hotplug ports on
> hot-add but we have not done that upon the initial scan. The first four
> patches make the initial root bus scan path to do the same.
>
> The additional patches are just a small cleanups that can be applied
> separately too.
>
> The related bug: https://bugzilla.kernel.org/show_bug.cgi?id=216000.
>
> The previous version of the patch series can be found here:
>
> https://lore.kernel.org/linux-pci/20220816100740.68667-1-mika.westerberg@linux.intel.com/
>
> Changes from the previous version:
>
> * Split patch 3 into two: move and then the actual fix as suggested by
> Andy.
> * Fold the two whitespace fixes into one patch.
> * Added tags from Chris and Andy.
>
> Mika Westerberg (6):
> PCI: Fix used_buses calculation in pci_scan_child_bus_extend()
> PCI: Pass available buses also when the bridge is already configured
> PCI: Move pci_assign_unassigned_root_bus_resources()
> PCI: Distribute available resources for root buses too
> PCI: Fix whitespace and indentation
> PCI: Fix typo in pci_scan_child_bus_extend()
>
> drivers/pci/probe.c | 13 +-
> drivers/pci/setup-bus.c | 290 ++++++++++++++++++++++++----------------
> 2 files changed, 181 insertions(+), 122 deletions(-)
Applied to pci/resource for v6.1, thanks, Mika!
prev parent reply other threads:[~2022-09-21 19:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-05 8:02 [PATCH v2 0/6] PCI: Allow for future resource expansion on initial root bus scan Mika Westerberg
2022-09-05 8:02 ` [PATCH v2 1/6] PCI: Fix used_buses calculation in pci_scan_child_bus_extend() Mika Westerberg
2022-09-05 8:02 ` [PATCH v2 2/6] PCI: Pass available buses also when the bridge is already configured Mika Westerberg
2022-09-05 8:02 ` [PATCH v2 3/6] PCI: Move pci_assign_unassigned_root_bus_resources() Mika Westerberg
2022-09-05 8:02 ` [PATCH v2 4/6] PCI: Distribute available resources for root buses too Mika Westerberg
2022-10-14 11:45 ` Regression: " Jonathan Cameron
2022-10-14 13:30 ` Mika Westerberg
2022-10-14 14:48 ` Jonathan Cameron
2022-10-24 11:13 ` Mika Westerberg
2022-10-24 11:25 ` Mika Westerberg
2022-10-25 12:36 ` Mika Westerberg
2022-10-25 13:23 ` Andy Shevchenko
2022-10-31 7:40 ` Mika Westerberg
2022-10-25 14:05 ` Jonathan Cameron
2022-10-26 8:38 ` Mika Westerberg
2022-10-26 8:49 ` Regression: Re: [PATCH v2 4/6] PCI: Distribute available resources for root buses too #forregzbot Thorsten Leemhuis
2022-10-26 18:17 ` Thorsten Leemhuis
2022-09-05 8:02 ` [PATCH v2 5/6] PCI: Fix whitespace and indentation Mika Westerberg
2022-09-05 8:02 ` [PATCH v2 6/6] PCI: Fix typo in pci_scan_child_bus_extend() Mika Westerberg
2022-09-21 19:52 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220921195258.GA1232632@bhelgaas \
--to=helgaas@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=chris.chiu@canonical.com \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mika.westerberg@linux.intel.com \
--cc=rafael.j.wysocki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox