Re: [PATCH] PCI: Exit restore process when device is still powerdown

[Bjorn Helgaas <helgaas@kernel.org>]

On Fri, Jan 20, 2023 at 02:18:24PM +0800, jiantao zhang wrote:
> 在 2023/1/13 6:13, Bjorn Helgaas 写道:
> > On Thu, Dec 22, 2022 at 12:41:04PM +0000, Jiantao Zhang wrote:
> > > We get this stack when the rp doesn't power up in resume noirq:
> > >      dump_backtrace.cfi_jt+0x0/0x4
> > >      dump_stack_lvl+0xb4/0x10c
> > >      show_regs_before_dump_stack+0x1c/0x30
> > >      arm64_serror_panic+0x110/0x1a8
> > >      do_serror+0x16c/0x1cc
> > >      el1_error+0x8c/0x10c
> > >      do_raw_spin_unlock+0x74/0xdc
> > >      pci_bus_read_config_word+0xdc/0x1dc
> > >      pci_restore_msi_state+0x2f4/0x36c
> > >      pci_restore_state+0x13f0/0x1444
> > >      pci_pm_resume_noirq+0x158/0x318
> > >      dpm_run_callback+0x178/0x5e8
> > >      device_resume_noirq+0x250/0x264
> > >      async_resume_noirq+0x20/0xf8
> > >      async_run_entry_fn+0xfc/0x364
> > >      process_one_work+0x37c/0x7f4
> > >      worker_thread+0x3e8/0x754
> > >      kthread+0x168/0x204
> > >      ret_from_fork+0x10/0x18
> > > The ep device uses msix, the restore process will write bar space
> > > in __pci_msix_desc_mask_irq, which will result in accessing the
> > > powerdown area when the rp doesn't power on.
> > 
> > > It makes sense we should do nothing when the device is still powerdown.
> > > 
> > > Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com>
> > > Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
> > > ---
> > >   drivers/pci/pci.c | 2 +-
> > >   1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index fba95486caaf..279f6e8c5a00 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -1764,7 +1764,7 @@ static void pci_restore_rebar_state(struct pci_dev *pdev)
> > >    */
> > >   void pci_restore_state(struct pci_dev *dev)
> > >   {
> > > -	if (!dev->state_saved)
> > > +	if (!dev->state_saved || dev->current_state == PCI_UNKNOWN)
> > >   		return;
> > 
> > This doesn't seem right to me because it seems like we're covering up
> > a problem elsewhere.
> > 
> > If we need access to the endpoint to restore state, shouldn't we
> > ensure that the endpoint is powered up before we try to access it?
> > 
> > We depend on the state being restored, so if we skip the restore here,
> > where *will* it happen?
>
> As the call stack shows the serror happens in pci_pm_resume_noirq(),
> which belongs to pci pm framework. The resume process related to pci
> devices goes like this:
> 
> stage noirq:
> Root Port's call stack: device_resume_noirq() --> pci_pm_resume_noirq() -->
> resume_noirq callback
> endpoint's call stack: device_resume_noirq() --> pci_pm_resume_noirq() -->
> resume_noirq callback
> 
> stage early:
> Root Port's call stack: device_resume_early() --> pci_pm_resume_early() -->
> device resume_early callback
> endpoint's call stack: device_resume_early() --> pci_pm_resume_early() -->
> device resume_early callback
> 
> stage normal:
> Root Port's call stack: device_resume() --> pci_pm_resume() --> device
> resume callback
> endpoint's call stack: device_resume() --> pci_pm_resume() --> device resume
> callback
> 
> The problem is we don't power up the controller in Root Port's
> resume_noirq callback (actually we don't even register resume_noirq
> callback for some reason), so the serror happens because of
> accessing powerdown area when endpoint's pci_pm_resume_noirq() calls
> pci_restore_state() which will call pci_restore_msi_state() to
> restore MSI-X state.

Yes.  So when is the MSI-X state restored?

If I understand correctly, your patch just skips pci_restore_state()
when the device power state is PCI_UNKNOWN.  But I assume we still
need to restore the MSI-X and other state *somewhere*.

Your patch changes the generic code that *all* platforms use, but I
have not heard of this problem on other hardware, so I assume there's
something different about power management on your platform.  That
makes me think the solution would be a platform-specific change, not
this generic code change.

> So we wonder if there is strong restriction that we must poweron in
> Root Port's resume_noirq callback.  The pci_restore_state() can't
> restore anything when the device is still at PCI_UNKNOWN state, and
> if the device is accessible it can't be at PCI_UNKNOWN state, so the
> patch doesn't make any difference for original process.