Re: [PATCH v2 09/16] PCI: epf-test: Improve handling of command and status registers

[Manivannan Sadhasivam <mani@kernel.org>]

On Wed, Mar 08, 2023 at 06:03:06PM +0900, Damien Le Moal wrote:
> The pci-epf-test driver uses the test register bar memory directly
> to get and execute a test registers set by the RC side and defined
> using a struct pci_epf_test_reg. This direct use relies on a casts of
> the register bar to get a pointer to a struct pci_epf_test_reg to
> execute the test case and sending back the test result through the
> status field of struct pci_epf_test_reg. In practice, the status field
> is always updated before an interrupt is raised in
> pci_epf_test_raise_irq(), to ensure that the RC side sees the updated
> status when receiving the interrupts.
> 
> However, such cast-based direct access does not ensure that changes to
> the status register make it to memory, and so visible to the host,
> before an interrupt is raised, thus potentially resulting in the RC host
> not seeing the correct status result for a test.
> 
> Avoid this potential problem by using READ_ONCE()/WRITE_ONCE() when
> accessing the command and status fields of a pci_epf_test_reg structure.
> This ensure that a test start (pci_epf_test_cmd_handler() function) and
> completion (with the function pci_epf_test_raise_irq()) achive a correct
> synchronization with the host side mmio register accesses.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
>  drivers/pci/endpoint/functions/pci-epf-test.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 43d623682850..e0cf8c2bf6db 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -615,9 +615,14 @@ static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test,
>  	struct pci_epf *epf = epf_test->epf;
>  	struct device *dev = &epf->dev;
>  	struct pci_epc *epc = epf->epc;
> +	u32 status = reg->status | STATUS_IRQ_RAISED;
>  	int count;
>  
> -	reg->status |= STATUS_IRQ_RAISED;
> +	/*
> +	 * Set the status before raising the IRQ to ensure that the host sees
> +	 * the updated value when it gets the IRQ.
> +	 */
> +	WRITE_ONCE(reg->status, status);
>  
>  	switch (reg->irq_type) {
>  	case IRQ_TYPE_LEGACY:
> @@ -661,12 +666,12 @@ static void pci_epf_test_cmd_handler(struct work_struct *work)
>  	enum pci_barno test_reg_bar = epf_test->test_reg_bar;
>  	struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
>  
> -	command = reg->command;
> +	command = READ_ONCE(reg->command);
>  	if (!command)
>  		goto reset_handler;
>  
> -	reg->command = 0;
> -	reg->status = 0;
> +	WRITE_ONCE(reg->command, 0);
> +	WRITE_ONCE(reg->status, 0);
>  
>  	if (reg->irq_type > IRQ_TYPE_MSIX) {
>  		dev_err(dev, "Failed to detect IRQ type\n");
> -- 
> 2.39.2
> 

-- 
மணிவண்ணன் சதாசிவம்