From: Manivannan Sadhasivam <mani@kernel.org>
To: Rohit Agarwal <quic_rohiagar@quicinc.com>
Cc: agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, lee@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, lpieralisi@kernel.org,
kw@linux.com, bhelgaas@google.com,
manivannan.sadhasivam@linaro.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v4 3/5] ARM: dts: qcom: sdx65: Add support for PCIe EP
Date: Mon, 27 Mar 2023 16:24:03 +0530 [thread overview]
Message-ID: <20230327105403.GF16424@thinkpad> (raw)
In-Reply-To: <1679036039-27157-4-git-send-email-quic_rohiagar@quicinc.com>
On Fri, Mar 17, 2023 at 12:23:57PM +0530, Rohit Agarwal wrote:
> Add support for PCIe Endpoint controller on the
> Qualcomm SDX65 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> arch/arm/boot/dts/qcom-sdx65.dtsi | 56 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index 084daf8..a7d8ad9 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -11,6 +11,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> #address-cells = <1>;
> @@ -293,6 +294,56 @@
> status = "disabled";
> };
>
> + pcie_ep: pcie-ep@1c00000 {
> + compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep";
> + reg = <0x01c00000 0x3000>,
> + <0x40000000 0xf1d>,
> + <0x40000f20 0xa8>,
> + <0x40001000 0x1000>,
> + <0x40200000 0x100000>,
> + <0x01c03000 0x3000>;
> + reg-names = "parf",
> + "dbi",
> + "elbi",
> + "atu",
> + "addr_space",
> + "mmio";
> +
> + qcom,perst-regs = <&tcsr 0xb258 0xb270>;
> +
> + clocks = <&gcc GCC_PCIE_AUX_CLK>,
> + <&gcc GCC_PCIE_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
> + <&gcc GCC_PCIE_SLEEP_CLK>,
> + <&gcc GCC_PCIE_0_CLKREF_EN>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "sleep",
> + "ref";
> +
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "global", "doorbell";
> +
> + resets = <&gcc GCC_PCIE_BCR>;
> + reset-names = "core";
> +
> + power-domains = <&gcc PCIE_GDSC>;
> +
> + phys = <&pcie_phy>;
> + phy-names = "pcie-phy";
> +
> + max-link-speed = <3>;
> + num-lanes = <2>;
> +
> + status = "disabled";
> + };
> +
> pcie_phy: phy@1c06000 {
> compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
> reg = <0x01c06000 0x2000>;
> @@ -330,6 +381,11 @@
> #hwlock-cells = <1>;
> };
>
> + tcsr: syscon@1fcb000 {
> + compatible = "qcom,sdx65-tcsr", "syscon";
> + reg = <0x01fc0000 0x1000>;
> + };
> +
> remoteproc_mpss: remoteproc@4080000 {
> compatible = "qcom,sdx55-mpss-pas";
> reg = <0x04080000 0x4040>;
> --
> 2.7.4
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2023-03-27 10:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-17 6:53 [PATCH v4 0/5] Add PCIe EP support for SDX65 Rohit Agarwal
2023-03-17 6:53 ` [PATCH v4 1/5] dt-bindings: PCI: qcom: Add SDX65 SoC Rohit Agarwal
2023-03-27 10:50 ` Manivannan Sadhasivam
2023-03-17 6:53 ` [PATCH v4 2/5] ARM: dts: qcom: sdx65: Add support for PCIe PHY Rohit Agarwal
2023-03-28 13:29 ` Konrad Dybcio
2023-03-17 6:53 ` [PATCH v4 3/5] ARM: dts: qcom: sdx65: Add support for PCIe EP Rohit Agarwal
2023-03-27 10:54 ` Manivannan Sadhasivam [this message]
2023-03-28 13:29 ` Konrad Dybcio
2023-03-17 6:53 ` [PATCH v4 4/5] ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY Rohit Agarwal
2023-03-28 13:30 ` Konrad Dybcio
2023-03-17 6:53 ` [PATCH v4 5/5] ARM: dts: qcom: sdx65-mtp: Enable PCIe EP Rohit Agarwal
2023-03-28 13:30 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230327105403.GF16424@thinkpad \
--to=mani@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=lee@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=quic_rohiagar@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).