From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: bhelgaas@google.com
Cc: mika.westerberg@linux.intel.com, koba.ko@canonical.com,
sathyanarayanan.kuppuswamy@linux.intel.com,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/4] PCI/AER: Factor out interrupt toggling into helpers
Date: Thu, 20 Apr 2023 20:59:38 +0800 [thread overview]
Message-ID: <20230420125941.333675-2-kai.heng.feng@canonical.com> (raw)
In-Reply-To: <20230420125941.333675-1-kai.heng.feng@canonical.com>
There are many places that enable and disable AER interrput, so move
them into helpers.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
- Correct subject.
v2:
- New patch.
drivers/pci/pcie/aer.c | 45 +++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f6c24ded134c..1420e1f27105 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1227,6 +1227,28 @@ static irqreturn_t aer_irq(int irq, void *context)
return IRQ_WAKE_THREAD;
}
+static void aer_enable_irq(struct pci_dev *pdev)
+{
+ int aer = pdev->aer_cap;
+ u32 reg32;
+
+ /* Enable Root Port's interrupt in response to error messages */
+ pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
+ pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+}
+
+static void aer_disable_irq(struct pci_dev *pdev)
+{
+ int aer = pdev->aer_cap;
+ u32 reg32;
+
+ /* Disable Root's interrupt in response to error messages */
+ pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
+ pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+}
+
/**
* aer_enable_rootport - enable Root Port's interrupts when receiving messages
* @rpc: pointer to a Root Port data structure
@@ -1256,10 +1278,7 @@ static void aer_enable_rootport(struct aer_rpc *rpc)
pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, ®32);
pci_write_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, reg32);
- /* Enable Root Port's interrupt in response to error messages */
- pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ aer_enable_irq(pdev);
}
/**
@@ -1274,10 +1293,7 @@ static void aer_disable_rootport(struct aer_rpc *rpc)
int aer = pdev->aer_cap;
u32 reg32;
- /* Disable Root's interrupt in response to error messages */
- pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ aer_disable_irq(pdev);
/* Clear Root's error status reg */
pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, ®32);
@@ -1372,12 +1388,8 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
*/
aer = root ? root->aer_cap : 0;
- if ((host->native_aer || pcie_ports_native) && aer) {
- /* Disable Root's interrupt in response to error messages */
- pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
- }
+ if ((host->native_aer || pcie_ports_native) && aer)
+ aer_disable_irq(root);
if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
rc = pcie_reset_flr(dev, PCI_RESET_DO_RESET);
@@ -1396,10 +1408,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, ®32);
pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
- /* Enable Root Port's interrupt in response to error messages */
- pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, ®32);
- reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ aer_enable_irq(root);
}
return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
--
2.34.1
next prev parent reply other threads:[~2023-04-20 13:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 12:59 [PATCH v3 1/4] PCI: Keep AER status in pci_restore_state() Kai-Heng Feng
2023-04-20 12:59 ` Kai-Heng Feng [this message]
2023-04-20 13:23 ` [PATCH v3 2/4] PCI/AER: Factor out interrupt toggling into helpers Mika Westerberg
2023-04-20 14:41 ` Sathyanarayanan Kuppuswamy
2023-04-20 12:59 ` [PATCH v3 3/4] PCI/AER: Disable AER interrupt on suspend Kai-Heng Feng
2023-04-20 14:53 ` Sathyanarayanan Kuppuswamy
2023-04-21 5:32 ` Kai-Heng Feng
2023-04-20 12:59 ` [PATCH v3 4/4] PCI/DPC: Disable DPC interrupt during suspend Kai-Heng Feng
2023-04-20 14:39 ` [PATCH v3 1/4] PCI: Keep AER status in pci_restore_state() Sathyanarayanan Kuppuswamy
2023-04-21 1:35 ` Kai-Heng Feng
2023-04-21 2:30 ` Sathyanarayanan Kuppuswamy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230420125941.333675-2-kai.heng.feng@canonical.com \
--to=kai.heng.feng@canonical.com \
--cc=bhelgaas@google.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=oohall@gmail.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox