[PATCH] PCI: vmd: Fix domain reset operation

[Nirmal Patel <nirmal.patel@linux.intel.com>]

During domain reset process we are accidentally enabling
the prefetchable memory by writing 0x0 to Prefetchable Memory
Base and Prefetchable Memory Limit registers. As a result certain
platforms failed to boot up.

Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:

  The Prefetchable Memory Limit register must be programmed to a smaller
  value than the Prefetchable Memory Base register if there is no
  prefetchable memory on the secondary side of the bridge.

When clearing Prefetchable Memory Base, Prefetchable Memory
Limit and Prefetchable Base Upper 32 bits, the prefetchable
memory range becomes 0x0-0x575000fffff. As a result the
prefetchable memory is enabled accidentally.

Implementing correct operation by writing a value to Prefetchable
Base Memory larger than the value of Prefetchable Memory Limit.

Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
---
 drivers/pci/controller/vmd.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 769eedeb8802..f3eb740e3028 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -526,8 +526,18 @@ static void vmd_domain_reset(struct vmd_dev *vmd)
 				     PCI_CLASS_BRIDGE_PCI))
 					continue;
 
-				memset_io(base + PCI_IO_BASE, 0,
-					  PCI_ROM_ADDRESS1 - PCI_IO_BASE);
+				writel(0, base + PCI_IO_BASE);
+				writew(0xFFF0, base + PCI_MEMORY_BASE);
+				writew(0, base + PCI_MEMORY_LIMIT);
+
+				writew(0xFFF1, base + PCI_PREF_MEMORY_BASE);
+				writew(0, base + PCI_PREF_MEMORY_LIMIT);
+
+				writel(0xFFFFFFFF, base + PCI_PREF_BASE_UPPER32);
+				writel(0, base + PCI_PREF_LIMIT_UPPER32);
+
+				writel(0, base + PCI_IO_BASE_UPPER16);
+				writeb(0, base + PCI_CAPABILITY_LIST);
 			}
 		}
 	}
-- 
2.27.0