From: Manivannan Sadhasivam <mani@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: bhelgaas@google.com, imx@lists.linux.dev, kw@linux.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, lpieralisi@kernel.org,
minghuan.Lian@nxp.com, mingkai.hu@nxp.com, robh@kernel.org,
roy.zang@nxp.com
Subject: Re: [PATCH v2 2/2] PCI: layerscape: Add the workaround for lost link capablities during reset
Date: Wed, 19 Jul 2023 09:59:13 +0530 [thread overview]
Message-ID: <20230719042913.GA5990@thinkpad> (raw)
In-Reply-To: <20230718182142.1864070-2-Frank.Li@nxp.com>
On Tue, Jul 18, 2023 at 02:21:42PM -0400, Frank Li wrote:
> From: Xiaowei Bao <xiaowei.bao@nxp.com>
>
> A workaround for the issue where the PCI Express Endpoint (EP) controller
> loses the values of the Maximum Link Width and Supported Link Speed from
> the Link Capabilities Register, which initially configured by the Reset
> Configuration Word (RCW) during a link-down or hot reset event.
>
> Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
- Mani
> ---
> change from v1 to v2:
> - add comments at restore register
> - add fixes tag
>
> .../pci/controller/dwc/pci-layerscape-ep.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index e0969ff2ddf7..b1faf41a2fae 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -45,6 +45,7 @@ struct ls_pcie_ep {
> struct pci_epc_features *ls_epc;
> const struct ls_pcie_ep_drvdata *drvdata;
> int irq;
> + u32 lnkcap;
> bool big_endian;
> };
>
> @@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> struct ls_pcie_ep *pcie = dev_id;
> struct dw_pcie *pci = pcie->pci;
> u32 val, cfg;
> + u8 offset;
>
> val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> @@ -81,6 +83,19 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> return IRQ_NONE;
>
> if (val & PEX_PF0_PME_MES_DR_LUD) {
> +
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> + /*
> + * The values of the Maximum Link Width and Supported Link
> + * Speed from the Link Capabilities Register will be lost
> + * during link down or hot reset. Restore initial value
> + * that configured by the Reset Configuration Word (RCW).
> + */
> + dw_pcie_dbi_ro_wr_en(pci);
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
> + dw_pcie_dbi_ro_wr_dis(pci);
> +
> cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> cfg |= PEX_PF0_CFG_READY;
> ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> @@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> struct ls_pcie_ep *pcie;
> struct pci_epc_features *ls_epc;
> struct resource *dbi_base;
> + u8 offset;
> int ret;
>
> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, pcie);
>
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> +
> ret = dw_pcie_ep_init(&pci->ep);
> if (ret)
> return ret;
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
prev parent reply other threads:[~2023-07-19 4:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-18 18:21 [PATCH v2 1/2] PCI: layerscape: Add support for Link down notification Frank Li
2023-07-18 18:21 ` [PATCH v2 2/2] PCI: layerscape: Add the workaround for lost link capablities during reset Frank Li
2023-07-19 4:29 ` Manivannan Sadhasivam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230719042913.GA5990@thinkpad \
--to=mani@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=imx@lists.linux.dev \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lpieralisi@kernel.org \
--cc=minghuan.Lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh@kernel.org \
--cc=roy.zang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).