linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: helgaas@kernel.org, bhelgaas@google.com,
	devicetree@vger.kernel.org, gustavo.pimentel@synopsys.com,
	imx@lists.linux.dev, kw@linux.com, leoyang.li@nxp.com,
	linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	lorenzo.pieralisi@arm.com, lpieralisi@kernel.org,
	manivannan.sadhasivam@linaro.org, minghuan.lian@nxp.com,
	mingkai.hu@nxp.com, robh+dt@kernel.org, roy.zang@nxp.com,
	shawnguo@kernel.org, zhiqiang.hou@nxp.com
Subject: Re: [PATCH v9 3/3] PCI: layerscape: Add power management support for ls1028a
Date: Mon, 7 Aug 2023 19:11:38 +0530	[thread overview]
Message-ID: <20230807134138.GE18257@thinkpad> (raw)
In-Reply-To: <20230804180637.462573-4-Frank.Li@nxp.com>

On Fri, Aug 04, 2023 at 02:06:37PM -0400, Frank Li wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> 
> Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
> common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
> suspend state.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Minor nits below. With that,

Acked-by: Manivannan Sadhasivam <mani@kernel.org>

> ---
>  drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
>  1 file changed, 121 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index ed5fb492fe084..7586aece769b2 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -8,9 +8,11 @@
>   * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/kernel.h>
>  #include <linux/interrupt.h>
>  #include <linux/init.h>
> +#include <linux/iopoll.h>
>  #include <linux/of_pci.h>
>  #include <linux/of_platform.h>
>  #include <linux/of_address.h>
> @@ -20,6 +22,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
>  
> +#include "../../pci.h"
>  #include "pcie-designware.h"
>  
>  /* PEX Internal Configuration Registers */
> @@ -27,12 +30,26 @@
>  #define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
>  #define PCIE_ABSERR_SETTING	0x9401 /* Forward error of non-posted request */
>  
> +/* PF Message Command Register */
> +#define LS_PCIE_PF_MCR		0x2c
> +#define PF_MCR_PTOMR		BIT(0)
> +#define PF_MCR_EXL2S		BIT(1)
> +
>  #define PCIE_IATU_NUM		6
>  
> +struct ls_pcie_drvdata {
> +	const u32 pf_off;
> +	bool pm_support;
> +};
> +
>  struct ls_pcie {
>  	struct dw_pcie *pci;
> +	const struct ls_pcie_drvdata *drvdata;
> +	void __iomem *pf_base;
> +	bool big_endian;
>  };
>  
> +#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
>  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -73,6 +90,60 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
>  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +{
> +	if (pcie->big_endian)
> +		return ioread32be(pcie->pf_base + off);
> +
> +	return ioread32(pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> +	if (pcie->big_endian)
> +		iowrite32be(val, pcie->pf_base + off);
> +	else
> +		iowrite32(val, pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +	int ret;
> +
> +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val |= PF_MCR_PTOMR;
> +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +				 val, !(val & PF_MCR_PTOMR),
> +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret)
> +		dev_err(pcie->pci->dev, "poll turn off message timeout\n");

dev_err(pci->dev, "PME_Turn_off timeout\n");

> +}
> +
> +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +	int ret;
> +
> +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val |= PF_MCR_EXL2S;
> +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +				 val, !(val & PF_MCR_EXL2S),
> +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret)
> +		dev_err(pcie->pci->dev, "poll exit L2 state timeout\n");

dev_err(pci->dev, "L2 exit timeout\n");

- Mani

> +}
> +
>  static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -91,18 +162,28 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls_pcie_send_turnoff_msg,
> +	.exit_from_l2 = ls_pcie_exit_from_l2,
> +};
> +
> +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> +};
> +
> +static const struct ls_pcie_drvdata layerscape_drvdata = {
> +	.pf_off = 0xc0000,
> +	.pm_support = true,
>  };
>  
>  static const struct of_device_id ls_pcie_of_match[] = {
> -	{ .compatible = "fsl,ls1012a-pcie", },
> -	{ .compatible = "fsl,ls1021a-pcie", },
> -	{ .compatible = "fsl,ls1028a-pcie", },
> -	{ .compatible = "fsl,ls1043a-pcie", },
> -	{ .compatible = "fsl,ls1046a-pcie", },
> -	{ .compatible = "fsl,ls2080a-pcie", },
> -	{ .compatible = "fsl,ls2085a-pcie", },
> -	{ .compatible = "fsl,ls2088a-pcie", },
> -	{ .compatible = "fsl,ls1088a-pcie", },
> +	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
>  	{ },
>  };
>  
> @@ -121,6 +202,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	if (!pci)
>  		return -ENOMEM;
>  
> +	pcie->drvdata = of_device_get_match_data(dev);
> +
>  	pci->dev = dev;
>  	pci->pp.ops = &ls_pcie_host_ops;
>  
> @@ -131,6 +214,10 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	if (IS_ERR(pci->dbi_base))
>  		return PTR_ERR(pci->dbi_base);
>  
> +	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> +
> +	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> @@ -139,12 +226,37 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	return dw_pcie_host_init(&pci->pp);
>  }
>  
> +static int ls_pcie_suspend_noirq(struct device *dev)
> +{
> +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie->drvdata->pm_support)
> +		return 0;
> +
> +	return dw_pcie_suspend_noirq(pcie->pci);
> +}
> +
> +static int ls_pcie_resume_noirq(struct device *dev)
> +{
> +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie->drvdata->pm_support)
> +		return 0;
> +
> +	return dw_pcie_resume_noirq(pcie->pci);
> +}
> +
> +static const struct dev_pm_ops ls_pcie_pm_ops = {
> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, ls_pcie_resume_noirq)
> +};
> +
>  static struct platform_driver ls_pcie_driver = {
>  	.probe = ls_pcie_probe,
>  	.driver = {
>  		.name = "layerscape-pcie",
>  		.of_match_table = ls_pcie_of_match,
>  		.suppress_bind_attrs = true,
> +		.pm = &ls_pcie_pm_ops,
>  	},
>  };
>  builtin_platform_driver(ls_pcie_driver);
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2023-08-07 13:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-04 18:06 [PATCH v9 0/3] dwc general suspend/resume functionality Frank Li
2023-08-04 18:06 ` [PATCH v9 1/3] PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_US Frank Li
2023-08-07 13:19   ` Manivannan Sadhasivam
2023-08-04 18:06 ` [PATCH v9 2/3] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions Frank Li
2023-08-07 13:35   ` Manivannan Sadhasivam
2023-08-04 18:06 ` [PATCH v9 3/3] PCI: layerscape: Add power management support for ls1028a Frank Li
2023-08-07 13:41   ` Manivannan Sadhasivam [this message]
2023-08-07 16:20 ` [PATCH v9 0/3] dwc general suspend/resume functionality Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230807134138.GE18257@thinkpad \
    --to=mani@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=helgaas@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=kw@linux.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=roy.zang@nxp.com \
    --cc=shawnguo@kernel.org \
    --cc=zhiqiang.hou@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).