linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <helgaas@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 10/14] PCI: Do error check on own line to split long if conditions
Date: Thu, 24 Aug 2023 16:28:28 +0300	[thread overview]
Message-ID: <20230824132832.78705-11-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230824132832.78705-1-ilpo.jarvinen@linux.intel.com>

Placing PCI error code check inside if condition usually results in
need to split lines. Combined with additional conditions the if
condition becomes messy.

Convert to the usual error handling pattern with an additional variable
to improve code readability. In addition, reverse the logic in
pci_find_vsec_capability() to get rid of &&.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/pci/pci.c    | 9 ++++++---
 drivers/pci/probe.c  | 6 +++---
 drivers/pci/quirks.c | 6 +++---
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 60230da957e0..e5a58f0fe58d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -732,15 +732,18 @@ u16 pci_find_vsec_capability(struct pci_dev *dev, u16 vendor, int cap)
 {
 	u16 vsec = 0;
 	u32 header;
+	int ret;
 
 	if (vendor != dev->vendor)
 		return 0;
 
 	while ((vsec = pci_find_next_ext_capability(dev, vsec,
 						     PCI_EXT_CAP_ID_VNDR))) {
-		if (pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER,
-					  &header) == PCIBIOS_SUCCESSFUL &&
-		    PCI_VNDR_HEADER_ID(header) == cap)
+		ret = pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header);
+		if (ret != PCIBIOS_SUCCESSFUL)
+			continue;
+
+		if (PCI_VNDR_HEADER_ID(header) == cap)
 			return vsec;
 	}
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8bac3ce02609..0717ff62e54f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1652,15 +1652,15 @@ static void pci_set_removable(struct pci_dev *dev)
 static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
 {
 #ifdef CONFIG_PCI_QUIRKS
-	int pos;
+	int pos, ret;
 	u32 header, tmp;
 
 	pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
 
 	for (pos = PCI_CFG_SPACE_SIZE;
 	     pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
-		if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL
-		    || header != tmp)
+		ret = pci_read_config_dword(dev, pos, &tmp);
+		if ((ret != PCIBIOS_SUCCESSFUL) || (header != tmp))
 			return false;
 	}
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 321156ca273d..863b9a64c1fe 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5381,7 +5381,7 @@ int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
  */
 static void quirk_intel_qat_vf_cap(struct pci_dev *pdev)
 {
-	int pos, i = 0;
+	int pos, i = 0, ret;
 	u8 next_cap;
 	u16 reg16, *cap;
 	struct pci_cap_saved_state *state;
@@ -5427,8 +5427,8 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev)
 		pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
 
 		pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
-		if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) !=
-		    PCIBIOS_SUCCESSFUL || (status == 0xffffffff))
+		ret = pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status);
+		if ((ret != PCIBIOS_SUCCESSFUL) || (status == 0xffffffff))
 			pdev->cfg_size = PCI_CFG_SPACE_SIZE;
 
 		if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
-- 
2.30.2


  parent reply	other threads:[~2023-08-24 13:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-24 13:28 [PATCH 00/14] PCI/treewide: Cleanup/streamline PCI error code handling Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 01/14] alpha: Streamline convoluted PCI error handling Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 02/14] MIPS: TXx9: Do PCI error checks on own line Ilpo Järvinen
2023-08-24 15:20   ` Philippe Mathieu-Daudé
2023-08-24 13:28 ` [PATCH 03/14] sh: pci: Do PCI error check " Ilpo Järvinen
2023-08-24 13:44   ` John Paul Adrian Glaubitz
2023-08-24 13:28 ` [PATCH 04/14] atm: iphase: Do PCI error checks " Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 05/14] hwmon: (via686a) " Ilpo Järvinen
2023-08-25 13:18   ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 06/14] hwmon: (vt8231) " Ilpo Järvinen
2023-08-25 13:19   ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 07/14] I2C: ali15x3: " Ilpo Järvinen
2023-08-24 16:00   ` Andi Shyti
2023-08-25  8:34     ` Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 08/14] I2C: nforce2: Do PCI error check " Ilpo Järvinen
2023-08-24 16:02   ` Andi Shyti
2023-09-01 11:12   ` Jean Delvare
2023-08-24 13:28 ` [PATCH 09/14] I2C: sis5595: Do PCI error checks " Ilpo Järvinen
2023-08-24 16:04   ` Andi Shyti
2023-09-01 11:16   ` Jean Delvare
2023-08-24 13:28 ` Ilpo Järvinen [this message]
2023-08-24 13:28 ` [PATCH 11/14] PCI: xgene: Do PCI error check " Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 12/14] scsi: ipr: Do PCI error checks " Ilpo Järvinen
2023-08-24 13:28 ` [PATCH 13/14] hwmon: (sis5595) " Ilpo Järvinen
2023-08-25 13:21   ` Guenter Roeck
2023-08-24 13:28 ` [PATCH 14/14] perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230824132832.78705-11-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).