[PATCH AUTOSEL 6.5 03/11] PCI: Make quirk using inw() depend on HAS_IOPORT

[PATCH AUTOSEL 6.5 03/11] PCI: Make quirk using inw() depend on HAS_IOPORT

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit f768c75d61582b011962f9dcb9ff8eafb8da0383 ]

In the future inw() and friends will not be compiled on architectures
without I/O port support.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/20230703135255.2202721-2-schnelle@linux.ibm.com
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 321156ca273d5..ef193661c3d15 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -361,6 +361,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_2,	quirk_isa_d
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_3,	quirk_isa_dma_hangs);
 #endif
 
+#ifdef CONFIG_HAS_IOPORT
 /*
  * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
  * for some HT machines to use C4 w/o hanging.
@@ -380,6 +381,7 @@ static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+#endif
 
 /* Chipsets where PCI->PCI transfers vanish or hang */
 static void quirk_nopcipci(struct pci_dev *dev)
-- 
2.40.1

[PATCH AUTOSEL 6.5 06/11] PCI: dwc: Provide deinit callback for i.MX

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit fc8b24c28bec19fc0621d108b9ee81ddfdedb25a ]

The i.MX integration for the DesignWare PCI controller has a _host_exit()
operation which undoes everything that the _host_init() operation does but
does not wire this up as the host_deinit callback for the core, or call it
in any path other than suspend. This means that if we ever unwind the
initial probe of the device, for example because it fails, the regulator
core complains that the regulators for the device were left enabled:

imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128

Wire up the callback so that the core can clean up after itself.

Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 27aaa2a6bf391..a18c20085e940 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1040,6 +1040,7 @@ static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
 
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
 	.host_init = imx6_pcie_host_init,
+	.host_deinit = imx6_pcie_host_exit,
 };
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-- 
2.40.1

[PATCH AUTOSEL 6.5 10/11] PCI: vmd: Disable bridge window for domain reset

[Sasha Levin]

From: Nirmal Patel <nirmal.patel@linux.intel.com>

[ Upstream commit f73eedc90bf73d48e8368e6b0b4ad76a7fffaef7 ]

During domain reset process vmd_domain_reset() clears PCI
configuration space of VMD root ports. But certain platform
has observed following errors and failed to boot.
  ...
  DMAR: VT-d detected Invalidation Queue Error: Reason f
  DMAR: VT-d detected Invalidation Time-out Error: SID ffff
  DMAR: VT-d detected Invalidation Completion Error: SID ffff
  DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0
  DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0
  DMAR: Invalidation Time-out Error (ITE) cleared

The root cause is that memset_io() clears prefetchable memory base/limit
registers and prefetchable base/limit 32 bits registers sequentially.
This seems to be enabling prefetchable memory if the device disabled
prefetchable memory originally.

Here is an example (before memset_io()):

  PCI configuration space for 10000:00:00.0:
  86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00
  00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20
  00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00
  ...

So, prefetchable memory is ffffffff00000000-575000fffff, which is
disabled. When memset_io() clears prefetchable base 32 bits register,
the prefetchable memory becomes 0000000000000000-575000fffff, which is
enabled and incorrect.

Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:

  The Prefetchable Memory Limit register must be programmed to a smaller
  value than the Prefetchable Memory Base register if there is no
  prefetchable memory on the secondary side of the bridge.

This is believed to be the reason for the failure and in addition the
sequence of operation in vmd_domain_reset() is not following the PCIe
specs.

Disable the bridge window by executing a sequence of operations
borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(),
that comply with the PCI specifications.

Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/vmd.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index e718a816d4814..ad56df98b8e63 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -541,8 +541,23 @@ static void vmd_domain_reset(struct vmd_dev *vmd)
 				     PCI_CLASS_BRIDGE_PCI))
 					continue;
 
-				memset_io(base + PCI_IO_BASE, 0,
-					  PCI_ROM_ADDRESS1 - PCI_IO_BASE);
+				/*
+				 * Temporarily disable the I/O range before updating
+				 * PCI_IO_BASE.
+				 */
+				writel(0x0000ffff, base + PCI_IO_BASE_UPPER16);
+				/* Update lower 16 bits of I/O base/limit */
+				writew(0x00f0, base + PCI_IO_BASE);
+				/* Update upper 16 bits of I/O base/limit */
+				writel(0, base + PCI_IO_BASE_UPPER16);
+
+				/* MMIO Base/Limit */
+				writel(0x0000fff0, base + PCI_MEMORY_BASE);
+
+				/* Prefetchable MMIO Base/Limit */
+				writel(0, base + PCI_PREF_LIMIT_UPPER32);
+				writel(0x0000fff0, base + PCI_PREF_MEMORY_BASE);
+				writel(0xffffffff, base + PCI_PREF_BASE_UPPER32);
 			}
 		}
 	}
-- 
2.40.1

[PATCH AUTOSEL 6.5 11/11] PCI: fu740: Set the number of MSI vectors

[Sasha Levin]

From: Yong-Xuan Wang <yongxuan.wang@sifive.com>

[ Upstream commit 551a60e1225e71fff8efd9390204c505b0870e0f ]

The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.

Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.

Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-fu740.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
index 0c90583c078bf..1e9b44b8bba48 100644
--- a/drivers/pci/controller/dwc/pcie-fu740.c
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -299,6 +299,7 @@ static int fu740_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 	pci->pp.ops = &fu740_pcie_host_ops;
+	pci->pp.num_vectors = MAX_MSI_IRQS;
 
 	/* SiFive specific region: mgmt */
 	afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt");
-- 
2.40.1