From: sharath.kumar.d.m@intel.com
To: helgaas@kernel.org
Cc: lpieralisi@kernel.org, kw@linux.com, robh@kernel.org,
bhelgaas@google.com, linux-pci@vger.kernel.org,
dinguyen@kernel.org, linux-kernel@vger.kernel.org,
D M Sharath Kumar <sharath.kumar.d.m@intel.com>
Subject: [PATCH v3 2/2] PCI: altera: add support for agilex family fpga
Date: Mon, 11 Sep 2023 18:52:14 +0530 [thread overview]
Message-ID: <20230911132214.1776157-3-sharath.kumar.d.m@intel.com> (raw)
In-Reply-To: <20230911132214.1776157-1-sharath.kumar.d.m@intel.com>
From: D M Sharath Kumar <sharath.kumar.d.m@intel.com>
create new instance of struct altera_pcie_data for
"altr,pcie-root-port-3.0"
provide corresponding callback
"port_conf_off" points to avmm port config register base
Signed-off-by: D M Sharath Kumar <sharath.kumar.d.m@intel.com>
---
drivers/pci/controller/pcie-altera.c | 207 ++++++++++++++++++++++++++-
1 file changed, 206 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 878f86b1cc6b..aa14ea588487 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -79,9 +79,20 @@
#define S10_TLP_FMTTYPE_CFGWR0 0x45
#define S10_TLP_FMTTYPE_CFGWR1 0x44
+#define AGLX_RP_CFG_ADDR(pcie, reg) \
+ (((pcie)->hip_base) + (reg))
+#define AGLX_RP_SECONDARY(pcie) \
+ readb(AGLX_RP_CFG_ADDR(pcie, PCI_SECONDARY_BUS))
+
+#define AGLX_BDF_REG 0x00002004
+#define AGLX_ROOT_PORT_IRQ_STATUS 0x14c
+#define AGLX_ROOT_PORT_IRQ_ENABLE 0x150
+#define AGLX_CFG_AER (1<<4)
+
enum altera_pcie_version {
ALTERA_PCIE_V1 = 0,
ALTERA_PCIE_V2,
+ ALTERA_PCIE_V3, /* AGILEX p-tile, f-tile */
};
struct altera_pcie {
@@ -93,6 +104,8 @@ struct altera_pcie {
struct irq_domain *irq_domain;
struct resource bus_range;
const struct altera_pcie_data *pcie_data;
+ void __iomem *cs_base;
+ u32 port_conf_off;
};
struct altera_pcie_ops {
@@ -138,6 +151,39 @@ static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg)
return readl_relaxed(pcie->cra_base + reg);
}
+static inline void cs_writel(struct altera_pcie *pcie, const u32 value,
+ const u32 reg)
+{
+ writel_relaxed(value, pcie->cs_base + reg);
+}
+
+static inline void cs_writew(struct altera_pcie *pcie, const u32 value,
+ const u32 reg)
+{
+ writew_relaxed(value, pcie->cs_base + reg);
+}
+
+static inline void cs_writeb(struct altera_pcie *pcie, const u32 value,
+ const u32 reg)
+{
+ writeb_relaxed(value, pcie->cs_base + reg);
+}
+
+static inline u32 cs_readl(struct altera_pcie *pcie, const u32 reg)
+{
+ return readl_relaxed(pcie->cs_base + reg);
+}
+
+static inline u32 cs_readw(struct altera_pcie *pcie, const u32 reg)
+{
+ return readw_relaxed(pcie->cs_base + reg);
+}
+
+static inline u32 cs_readb(struct altera_pcie *pcie, const u32 reg)
+{
+ return readb_relaxed(pcie->cs_base + reg);
+}
+
static bool altera_pcie_link_up(struct altera_pcie *pcie)
{
return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
@@ -152,6 +198,14 @@ static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
}
+static bool aglx_altera_pcie_link_up(struct altera_pcie *pcie)
+{
+ void __iomem *addr = AGLX_RP_CFG_ADDR(pcie,
+ pcie->pcie_data->cap_offset + PCI_EXP_LNKSTA);
+
+ return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
+}
+
/*
* Altera PCIe port uses BAR0 of RC's configuration space as the translation
* from PCI bus to native BUS. Entire DDR region is mapped into PCIe space
@@ -432,6 +486,101 @@ static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 busno, u32 devfn,
return PCIBIOS_SUCCESSFUL;
}
+static int aglx_rp_read_cfg(struct altera_pcie *pcie, u8 busno, u32 devfn,
+ int where, int size, u32 *value)
+{
+ void __iomem *addr = AGLX_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ *value = readb(addr);
+ break;
+ case 2:
+ *value = readw(addr);
+ break;
+ default:
+ *value = readl(addr);
+ break;
+ }
+
+ /* interrupt pin not programmed in hardware, set to INTA*/
+ if (where == PCI_INTERRUPT_PIN && size == 1)
+ *value = 0x01;
+ else if (where == PCI_INTERRUPT_LINE)
+ *value |= 0x0100;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int aglx_rp_write_cfg(struct altera_pcie *pcie, u8 busno, u32 devfn,
+ int where, int size, u32 value)
+{
+ void __iomem *addr = AGLX_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ writeb(value, addr);
+ break;
+ case 2:
+ writew(value, addr);
+ break;
+ default:
+ writel(value, addr);
+ break;
+ }
+
+ /*
+ * Monitor changes to PCI_PRIMARY_BUS register on root port
+ * and update local copy of root bus number accordingly.
+ */
+ if (busno == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
+ pcie->root_bus_nr = value & 0xff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int aglx_nonrp_write_cfg(struct altera_pcie *pcie, u8 busno,
+ unsigned int devfn, int where, int size, u32 value)
+{
+ cs_writel(pcie, ((busno<<8) | devfn), AGLX_BDF_REG);
+ if (busno > AGLX_RP_SECONDARY(pcie))
+ where |= (1<<12); /* type 1 */
+
+ switch (size) {
+ case 1:
+ cs_writeb(pcie, value, where);
+ break;
+ case 2:
+ cs_writew(pcie, value, where);
+ break;
+ default:
+ cs_writel(pcie, value, where);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int aglx_nonrp_read_cfg(struct altera_pcie *pcie, u8 busno,
+ unsigned int devfn, int where, int size, u32 *value)
+{
+ cs_writel(pcie, ((busno<<8) | devfn), AGLX_BDF_REG);
+ if (busno > AGLX_RP_SECONDARY(pcie))
+ where |= (1<<12); /* type 1 */
+
+ switch (size) {
+ case 1:
+ *value = cs_readb(pcie, where);
+ break;
+ case 2:
+ *value = cs_readw(pcie, where);
+ break;
+ default:
+ *value = cs_readl(pcie, where);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int arr_read_cfg(struct altera_pcie *pcie, u8 busno, u32 devfn,
int where, int size, u32 *value)
{
@@ -688,6 +837,30 @@ static void altera_pcie_isr(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
+static void aglx_isr(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct altera_pcie *pcie;
+ struct device *dev;
+ u32 status;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+ pcie = irq_desc_get_handler_data(desc);
+ dev = &pcie->pdev->dev;
+
+ status = readl((pcie->hip_base + pcie->port_conf_off
+ + AGLX_ROOT_PORT_IRQ_STATUS));
+ if (status & AGLX_CFG_AER) {
+ ret = generic_handle_domain_irq(pcie->irq_domain, 0);
+ if (ret)
+ dev_err_ratelimited(dev, "unexpected IRQ\n");
+ }
+ writel(AGLX_CFG_AER, (pcie->hip_base + pcie->port_conf_off
+ + AGLX_ROOT_PORT_IRQ_STATUS));
+ chained_irq_exit(chip, desc);
+}
+
static int altera_pcie_init_irq_domain(struct altera_pcie *pcie)
{
struct device *dev = &pcie->pdev->dev;
@@ -723,13 +896,25 @@ static int altera_pcie_parse_dt(struct altera_pcie *pcie)
return PTR_ERR(pcie->cra_base);
}
- if (pcie->pcie_data->version == ALTERA_PCIE_V2) {
+ if ((pcie->pcie_data->version == ALTERA_PCIE_V2) ||
+ (pcie->pcie_data->version == ALTERA_PCIE_V3)) {
pcie->hip_base =
devm_platform_ioremap_resource_byname(pdev, "Hip");
if (IS_ERR(pcie->hip_base))
return PTR_ERR(pcie->hip_base);
}
+ if (pcie->pcie_data->version == ALTERA_PCIE_V3) {
+ pcie->cs_base =
+ devm_platform_ioremap_resource_byname(pdev, "Cs");
+ if (IS_ERR(pcie->cs_base))
+ return PTR_ERR(pcie->cs_base);
+ of_property_read_u32(pcie->pdev->dev.of_node, "port_conf_stat",
+ &pcie->port_conf_off);
+ dev_dbg(&pcie->pdev->dev, "port_conf_stat_off =%#x\n",
+ pcie->port_conf_off);
+ }
+
/* setup IRQ */
pcie->irq = platform_get_irq(pdev, 0);
if (pcie->irq < 0)
@@ -767,6 +952,15 @@ static const struct altera_pcie_ops altera_pcie_ops_2_0 = {
.rp_isr = altera_pcie_isr,
};
+static const struct altera_pcie_ops altera_pcie_ops_3_0 = {
+ .rp_read_cfg = aglx_rp_read_cfg,
+ .rp_write_cfg = aglx_rp_write_cfg,
+ .get_link_status = aglx_altera_pcie_link_up,
+ .nonrp_read_cfg = aglx_nonrp_read_cfg,
+ .nonrp_write_cfg = aglx_nonrp_write_cfg,
+ .rp_isr = aglx_isr,
+};
+
static const struct altera_pcie_data altera_pcie_1_0_data = {
.ops = &altera_pcie_ops_1_0,
.cap_offset = 0x80,
@@ -787,11 +981,19 @@ static const struct altera_pcie_data altera_pcie_2_0_data = {
.cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
};
+static const struct altera_pcie_data altera_pcie_3_0_data = {
+ .ops = &altera_pcie_ops_3_0,
+ .version = ALTERA_PCIE_V3,
+ .cap_offset = 0x70,
+};
+
static const struct of_device_id altera_pcie_of_match[] = {
{.compatible = "altr,pcie-root-port-1.0",
.data = &altera_pcie_1_0_data },
{.compatible = "altr,pcie-root-port-2.0",
.data = &altera_pcie_2_0_data },
+ {.compatible = "altr,pcie-root-port-3.0",
+ .data = &altera_pcie_3_0_data },
{},
};
@@ -836,6 +1038,9 @@ static int altera_pcie_probe(struct platform_device *pdev)
/* enable all interrupts */
cra_writel(pcie, P2A_INT_ENA_ALL, P2A_INT_ENABLE);
altera_pcie_host_init(pcie);
+ } else if (pcie->pcie_data->version == ALTERA_PCIE_V3) {
+ writel(AGLX_CFG_AER, (pcie->hip_base + pcie->port_conf_off
+ + AGLX_ROOT_PORT_IRQ_ENABLE));
}
bridge->sysdata = pcie;
--
2.34.1
next prev parent reply other threads:[~2023-09-11 21:47 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 6:33 [PATCH 0/1] pci: agilex_rp: add pci root port support for agilex platform sharath.kumar.d.m
2023-06-16 6:33 ` [PATCH 1/1] pci: agilex_pci: add pcie rootport support for agilex sharath.kumar.d.m
2023-06-16 15:21 ` Bjorn Helgaas
2023-09-06 11:09 ` [PATCH v2 0/2] PCI: Altera: add support to Agilex family sharath.kumar.d.m
2023-09-06 11:09 ` [PATCH v2 1/2] PCI: altera: refactor driver for supporting new platform sharath.kumar.d.m
2023-09-06 17:08 ` Bjorn Helgaas
2023-09-08 9:09 ` D M, Sharath Kumar
2023-09-08 12:44 ` Bjorn Helgaas
2023-09-08 13:40 ` D M, Sharath Kumar
2023-09-08 19:52 ` Bjorn Helgaas
2023-09-11 10:33 ` [PATCH 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 12:24 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 12:24 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 12:24 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 13:35 ` [PATCH v2 1/2] PCI: altera: refactor driver for supporting new platform D M, Sharath Kumar
2023-09-11 20:08 ` Bjorn Helgaas
2023-09-13 12:59 ` Bjorn Helgaas
2023-09-17 17:05 ` [PATCH v4 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-17 17:05 ` [PATCH v4 1/2] PCI: altera: refactor driver for supporting new platform sharath.kumar.d.m
2023-09-17 17:05 ` [PATCH v4 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-10-25 22:05 ` Bjorn Helgaas
2023-10-28 13:26 ` [PATCH v5 2/2] PCI: altera: add support for agilex7 " sharath.kumar.d.m
2023-10-25 21:51 ` [PATCH v4 0/2] PCI: altera: add support to agilex family Bjorn Helgaas
2023-10-28 13:33 ` [PATCH v5 " sharath.kumar.d.m
2023-09-11 13:53 ` [PATCH v3 " sharath.kumar.d.m
2023-09-11 13:53 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:53 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-15 10:51 ` [PATCH v3 0/2] PCI: altera: add support to agilex family Dinh Nguyen
2023-09-06 11:09 ` [PATCH v2 2/2] PCI: altera: add suport for Agilex Family FPGA sharath.kumar.d.m
2023-09-06 17:12 ` Bjorn Helgaas
2023-09-08 9:15 ` D M, Sharath Kumar
2023-09-08 12:47 ` Bjorn Helgaas
2023-09-08 14:35 ` D M, Sharath Kumar
2023-09-08 19:48 ` Bjorn Helgaas
2023-09-11 10:38 ` [PATCH 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 13:08 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 13:08 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:08 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 14:08 ` [PATCH v2 2/2] PCI: altera: add suport for Agilex Family FPGA D M, Sharath Kumar
2023-09-11 13:16 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 13:16 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:16 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 13:22 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 13:22 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:22 ` sharath.kumar.d.m [this message]
2023-09-11 13:25 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 13:25 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:25 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 10:15 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 12:16 ` sharath.kumar.d.m
2023-09-11 13:31 ` sharath.kumar.d.m
2023-09-11 13:31 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:31 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
2023-09-11 13:45 ` [PATCH v3 0/2] PCI: altera: add support to agilex family sharath.kumar.d.m
2023-09-11 13:45 ` [PATCH v3 1/2] PCI: altera: refactor driver for supporting new platforms sharath.kumar.d.m
2023-09-11 13:45 ` [PATCH v3 2/2] PCI: altera: add support for agilex family fpga sharath.kumar.d.m
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230911132214.1776157-3-sharath.kumar.d.m@intel.com \
--to=sharath.kumar.d.m@intel.com \
--cc=bhelgaas@google.com \
--cc=dinguyen@kernel.org \
--cc=helgaas@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).