From: Conor Dooley <conor@kernel.org>
To: Minda Chen <minda.chen@starfivetech.com>
Cc: "Daire McNamara" <daire.mcnamara@microchip.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-pci@vger.kernel.org,
"Pali Rohár" <pali@kernel.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Mason Huo" <mason.huo@starfivetech.com>,
"Leyfoon Tan" <leyfoon.tan@starfivetech.com>,
"Kevin Xie" <kevin.xie@starfivetech.com>
Subject: Re: [PATCH v6 08/19] PCI: plda: Add event interrupt codes and IRQ domain ops
Date: Sat, 16 Sep 2023 01:11:29 +0100 [thread overview]
Message-ID: <20230916-rescuer-enroll-dd4fb1320676@spud> (raw)
In-Reply-To: <20230915102243.59775-9-minda.chen@starfivetech.com>
[-- Attachment #1: Type: text/plain, Size: 6048 bytes --]
On Fri, Sep 15, 2023 at 06:22:32PM +0800, Minda Chen wrote:
> For PolarFire implements non-PLDA local interrupt events, most of
> event interrupt process codes can not be re-used. PLDA implements
> new codes and IRQ domain ops like PolarFire.
>
> plda_get_events() adds a new IRQ num to event num mapping codes for
> PLDA local event except DMA engine interrupt events. The DMA engine
> interrupt events are implemented by vendors.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Perhaps not important as they will go away in the next patch, but for
this patch the riscv patchwork stuff noticed:
drivers/pci/controller/plda/pcie-plda-host.c:114:36: warning: unused variable 'plda_evt_dom_ops' [-Wunused-const-variable]
drivers/pci/controller/plda/pcie-plda-host.c:118:36: warning: unused variable 'plda_event_ops' [-Wunused-const-variable]
Cheers,
Conor.
> ---
> drivers/pci/controller/plda/pcie-plda-host.c | 99 ++++++++++++++++++++
> drivers/pci/controller/plda/pcie-plda.h | 33 +++++++
> 2 files changed, 132 insertions(+)
>
> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> index f0c7636f1f64..f29ff0f00dda 100644
> --- a/drivers/pci/controller/plda/pcie-plda-host.c
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -20,6 +20,105 @@
>
> #include "pcie-plda.h"
>
> +irqreturn_t plda_event_handler(int irq, void *dev_id)
> +{
> + return IRQ_HANDLED;
> +}
> +
> +static u32 plda_get_events(struct plda_pcie_rp *port)
> +{
> + u32 events, val, origin;
> +
> + origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
> +
> + /* Error events and doorbell events */
> + events = (origin >> A_ATR_EVT_POST_ERR_SHIFT) & 0xff;
> +
> + /* INTx events */
> + if (origin & PM_MSI_INT_INTX_MASK)
> + events |= BIT(EVENT_PM_MSI_INT_INTX);
> +
> + /* MSI event and sys events */
> + val = (origin >> PM_MSI_INT_MSI_SHIFT) & 0xf;
> + events |= val << EVENT_PM_MSI_INT_MSI;
> +
> + return events;
> +}
> +
> +static u32 plda_hwirq_to_mask(int hwirq)
> +{
> + u32 mask;
> +
> + if (hwirq < EVENT_PM_MSI_INT_INTX)
> + mask = BIT(hwirq + A_ATR_EVT_POST_ERR_SHIFT);
> + else if (hwirq == EVENT_PM_MSI_INT_INTX)
> + mask = PM_MSI_INT_INTX_MASK;
> + else
> + mask = BIT(hwirq + PM_MSI_TO_MASK_OFFSET);
> +
> + return mask;
> +}
> +
> +static void plda_ack_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> +
> + writel_relaxed(plda_hwirq_to_mask(data->hwirq),
> + port->bridge_addr + ISTATUS_LOCAL);
> +}
> +
> +static void plda_mask_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val &= ~mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static void plda_unmask_event_irq(struct irq_data *data)
> +{
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val |= mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static struct irq_chip plda_event_irq_chip = {
> + .name = "PLDA PCIe EVENT",
> + .irq_ack = plda_ack_event_irq,
> + .irq_mask = plda_mask_event_irq,
> + .irq_unmask = plda_unmask_event_irq,
> +};
> +
> +static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &plda_event_irq_chip, handle_level_irq);
> + irq_set_chip_data(irq, domain->host_data);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops plda_evt_dom_ops = {
> + .map = plda_pcie_event_map,
> +};
> +
> +static const struct plda_event_ops plda_event_ops = {
> + .get_events = plda_get_events,
> +};
> +
> void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> phys_addr_t axi_addr, phys_addr_t pci_addr,
> size_t size)
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 3deefd35fa5a..32a913d4101f 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -102,6 +102,38 @@
> #define EVENT_PM_MSI_INT_SYS_ERR 12
> #define NUM_PLDA_EVENTS 13
>
> +/*
> + * PLDA local interrupt register
> + *
> + * 31 27 23 15 7 0
> + * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
> + * |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
> + * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
> + * 0: AXI post error
> + * 1: AXI fetch error
> + * 2: AXI discard error
> + * 3: AXI doorbell
> + * 4: PCIe post error
> + * 5: PCIe fetch error
> + * 6: PCIe discard error
> + * 7: PCIe doorbell
> + * 8: 4 INTx interruts
> + * 9: MSI interrupt
> + * 10: AER event
> + * 11: PM/LTR/Hotplug
> + * 12: System error
> + * DMA error : reserved for vendor implement
> + * DMA end : reserved for vendor implement
> + */
> +
> +#define PM_MSI_TO_MASK_OFFSET 19
> +
> +struct plda_pcie_rp;
> +
> +struct plda_event_ops {
> + u32 (*get_events)(struct plda_pcie_rp *pcie);
> +};
> +
> struct plda_msi {
> struct mutex lock; /* Protect used bitmap */
> struct irq_domain *msi_domain;
> @@ -120,6 +152,7 @@ struct plda_pcie_rp {
> void __iomem *bridge_addr;
> };
>
> +irqreturn_t plda_event_handler(int irq, void *dev_id);
> void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> phys_addr_t axi_addr, phys_addr_t pci_addr,
> size_t size);
> --
> 2.17.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-09-16 0:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 10:22 [PATCH v6 0/19] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2023-09-15 10:22 ` [PATCH v6 01/19] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2023-09-15 10:22 ` [PATCH v6 02/19] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2023-09-16 0:09 ` Conor Dooley
2023-09-17 8:49 ` Minda Chen
2023-09-15 10:22 ` [PATCH v6 03/19] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Minda Chen
2023-09-15 10:22 ` [PATCH v6 04/19] PCI: microchip: Rename data structure Minda Chen
2023-09-15 10:22 ` [PATCH v6 05/19] PCI: microchip: Rename two setup functions Minda Chen
2023-09-15 10:22 ` [PATCH v6 06/19] PCI: microchip: Change the argument of plda_pcie_setup_iomems() Minda Chen
2023-09-15 10:22 ` [PATCH v6 07/19] PCI: plda: Move the setup functions to pcie-plda-host.c Minda Chen
2023-09-17 22:45 ` Emil Renner Berthing
2023-09-22 10:42 ` Minda Chen
2023-09-15 10:22 ` [PATCH v6 08/19] PCI: plda: Add event interrupt codes and IRQ domain ops Minda Chen
2023-09-16 0:11 ` Conor Dooley [this message]
2023-09-21 15:08 ` Bjorn Helgaas
2023-09-22 1:23 ` Minda Chen
2023-09-15 10:22 ` [PATCH v6 09/19] PCI: microchip: Rename interrupt related functions Minda Chen
2023-09-15 10:22 ` [PATCH v6 10/19] PCI: microchip: Add num_events field to struct plda_pcie_rp Minda Chen
2023-09-15 10:22 ` [PATCH v6 11/19] PCI: microchip: Add request_event_irq() callback function Minda Chen
2023-09-15 10:22 ` [PATCH v6 12/19] PCI: microchip: Add INTx and MSI event num to struct plda_event Minda Chen
2023-09-15 10:22 ` [PATCH v6 13/19] PCI: microchip: Add get_events() callback function Minda Chen
2023-09-15 10:22 ` [PATCH v6 14/19] PCI: microchip: Add event IRQ domain ops to plda_event struct Minda Chen
2023-09-15 10:22 ` [PATCH v6 15/19] PCI: microchip: Move IRQ functions to pcie-plda-host.c Minda Chen
2023-09-15 10:22 ` [PATCH v6 16/19] PCI: plda: Set plda_event_handler() to static Minda Chen
2023-09-15 10:22 ` [PATCH v6 17/19] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2023-09-15 10:22 ` [PATCH v6 18/19] PCI: starfive: Add " Minda Chen
2023-09-17 22:13 ` Emil Renner Berthing
2023-09-18 10:52 ` Emil Renner Berthing
2023-09-19 11:17 ` Minda Chen
2023-09-19 11:34 ` Emil Renner Berthing
2023-09-21 10:50 ` Minda Chen
2023-09-21 11:05 ` Emil Renner Berthing
2023-09-15 10:22 ` [PATCH v6 19/19] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
2023-09-16 0:07 ` Conor Dooley
2023-09-17 8:49 ` Minda Chen
2023-09-17 22:20 ` Emil Renner Berthing
2023-09-15 10:33 ` [PATCH v6 0/19] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230916-rescuer-enroll-dd4fb1320676@spud \
--to=conor@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=kevin.xie@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mason.huo@starfivetech.com \
--cc=minda.chen@starfivetech.com \
--cc=p.zabel@pengutronix.de \
--cc=pali@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).