From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 1/1] x86/PCI: Name PCI BIOS error code & use FIELD_GET()
Date: Thu, 26 Oct 2023 15:54:52 +0300 [thread overview]
Message-ID: <20231026125453.25767-1-ilpo.jarvinen@linux.intel.com> (raw)
PCI BIOS returns error code in AH register when carry flag is set. The
extraction of the error code is currently set of masking and shifting
which makes the code harder to understand than it needs to be.
Name the PCI BIOS error code with a define and use FIELD_GET() to
access it to improve code readability.
In addition, rely on implicit cast to int and replace zero test
with PCIBIOS_SUCCESSFUL.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
arch/x86/pci/pcbios.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 4f15280732ed..0515e0c05e10 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -3,6 +3,8 @@
* BIOS32 and PCI BIOS handling.
*/
+#include <linux/bits.h>
+#include <linux/bitfield.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -29,6 +31,12 @@
#define PCIBIOS_HW_TYPE1_SPEC 0x10
#define PCIBIOS_HW_TYPE2_SPEC 0x20
+/*
+ * Returned in EAX:
+ * - AH: return code
+ */
+#define PCIBIOS_RETURN_CODE GENMASK(15, 8)
+
int pcibios_enabled;
/* According to the BIOS specification at:
@@ -154,7 +162,7 @@ static int __init check_pcibios(void)
: "memory");
local_irq_restore(flags);
- status = (eax >> 8) & 0xff;
+ status = FIELD_GET(PCIBIOS_RETURN_CODE, eax);
hw_mech = eax & 0xff;
major_ver = (ebx >> 8) & 0xff;
minor_ver = ebx & 0xff;
@@ -227,7 +235,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return FIELD_GET(PCIBIOS_RETURN_CODE, result);
}
static int pci_bios_write(unsigned int seg, unsigned int bus,
@@ -269,7 +277,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return FIELD_GET(PCIBIOS_RETURN_CODE, result);
}
@@ -354,6 +362,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
{
struct irq_routing_options opt;
struct irq_routing_table *rt = NULL;
+ unsigned int error_code;
int ret, map;
unsigned long page;
@@ -385,8 +394,9 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
"m" (opt)
: "memory");
DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
- if (ret & 0xff00)
- printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+ error_code = FIELD_GET(PCIBIOS_RETURN_CODE, ret);
+ if (error_code)
+ printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", error_code);
else if (opt.size) {
rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
if (rt) {
@@ -415,7 +425,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
"b" ((dev->bus->number << 8) | dev->devfn),
"c" ((irq << 8) | (pin + 10)),
"S" (&pci_indirect));
- return !(ret & 0xff00);
+ return FIELD_GET(PCIBIOS_RETURN_CODE, ret) == PCIBIOS_SUCCESSFUL;
}
EXPORT_SYMBOL(pcibios_set_irq_routing);
--
2.30.2
next reply other threads:[~2023-10-26 12:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-26 12:54 Ilpo Järvinen [this message]
2023-10-26 17:37 ` [PATCH 1/1] x86/PCI: Name PCI BIOS error code & use FIELD_GET() Dave Hansen
2023-10-27 9:32 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231026125453.25767-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox