From: Damien Le Moal <dlemoal@kernel.org>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivami" <manivannan.sadhasivam@linaro.org>,
"Serge Semin" <fancer.lancer@gmail.com>,
"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v4 13/16] PCI: uniphier: Use INTX instead of legacy
Date: Wed, 22 Nov 2023 15:04:03 +0900 [thread overview]
Message-ID: <20231122060406.14695-14-dlemoal@kernel.org> (raw)
In-Reply-To: <20231122060406.14695-1-dlemoal@kernel.org>
In the Designware uniphier controller driver, including the endpoint
driver, change all names using "legacy" to use "intx", to match the
term used in the PCI specifications.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
drivers/pci/controller/dwc/pcie-uniphier-ep.c | 4 ++--
drivers/pci/controller/dwc/pcie-uniphier.c | 12 ++++++------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
index d47236d5678d..a45f94b284a2 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier-ep.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
@@ -212,7 +212,7 @@ static void uniphier_pcie_ep_init(struct dw_pcie_ep *ep)
dw_pcie_ep_reset_bar(pci, bar);
}
-static int uniphier_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep)
+static int uniphier_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
@@ -262,7 +262,7 @@ static int uniphier_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
switch (type) {
case PCI_IRQ_INTX:
- return uniphier_pcie_ep_raise_legacy_irq(ep);
+ return uniphier_pcie_ep_raise_intx_irq(ep);
case PCI_IRQ_MSI:
return uniphier_pcie_ep_raise_msi_irq(ep, func_no,
interrupt_num);
diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 48c3eba817b4..ff16b7345cfc 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -67,7 +67,7 @@ struct uniphier_pcie {
struct clk *clk;
struct reset_control *rst;
struct phy *phy;
- struct irq_domain *legacy_irq_domain;
+ struct irq_domain *intx_irq_domain;
};
#define to_uniphier_pcie(x) dev_get_drvdata((x)->dev)
@@ -253,12 +253,12 @@ static void uniphier_pcie_irq_handler(struct irq_desc *desc)
reg = FIELD_GET(PCL_RCV_INTX_ALL_STATUS, val);
for_each_set_bit(bit, ®, PCI_NUM_INTX)
- generic_handle_domain_irq(pcie->legacy_irq_domain, bit);
+ generic_handle_domain_irq(pcie->intx_irq_domain, bit);
chained_irq_exit(chip, desc);
}
-static int uniphier_pcie_config_legacy_irq(struct dw_pcie_rp *pp)
+static int uniphier_pcie_config_intx_irq(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct uniphier_pcie *pcie = to_uniphier_pcie(pci);
@@ -279,9 +279,9 @@ static int uniphier_pcie_config_legacy_irq(struct dw_pcie_rp *pp)
goto out_put_node;
}
- pcie->legacy_irq_domain = irq_domain_add_linear(np_intc, PCI_NUM_INTX,
+ pcie->intx_irq_domain = irq_domain_add_linear(np_intc, PCI_NUM_INTX,
&uniphier_intx_domain_ops, pp);
- if (!pcie->legacy_irq_domain) {
+ if (!pcie->intx_irq_domain) {
dev_err(pci->dev, "Failed to get INTx domain\n");
ret = -ENODEV;
goto out_put_node;
@@ -301,7 +301,7 @@ static int uniphier_pcie_host_init(struct dw_pcie_rp *pp)
struct uniphier_pcie *pcie = to_uniphier_pcie(pci);
int ret;
- ret = uniphier_pcie_config_legacy_irq(pp);
+ ret = uniphier_pcie_config_intx_irq(pp);
if (ret)
return ret;
--
2.42.0
next prev parent reply other threads:[~2023-11-22 6:04 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-22 6:03 [PATCH v4 00/16] Cleanup IRQ type definitions Damien Le Moal
2023-11-22 6:03 ` [PATCH v4 01/16] PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX Damien Le Moal
2023-11-22 6:15 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 02/16] PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions Damien Le Moal
2023-11-22 6:15 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 03/16] PCI: endpoint: Use INTX instead of legacy Damien Le Moal
2023-11-22 6:16 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 04/16] PCI: endpoint: Rename LEGACY to INTX in test function driver Damien Le Moal
2023-11-22 6:16 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 05/16] misc: pci_endpoint_test: Use INTX instead of LEGACY Damien Le Moal
2023-11-22 6:16 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 06/16] PCI: portdrv: Use PCI_IRQ_INTX Damien Le Moal
2023-11-22 6:17 ` Christoph Hellwig
2023-11-22 6:22 ` Damien Le Moal
2023-11-22 6:23 ` Christoph Hellwig
2023-11-22 6:33 ` Damien Le Moal
2023-11-22 6:36 ` Christoph Hellwig
2023-11-22 6:49 ` Damien Le Moal
2023-11-22 6:54 ` Christoph Hellwig
2023-11-22 6:59 ` Damien Le Moal
2023-12-19 10:07 ` Lorenzo Pieralisi
2023-12-20 4:41 ` Damien Le Moal
2023-11-22 6:03 ` [PATCH v4 07/16] PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() Damien Le Moal
2023-11-22 6:17 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 08/16] PCI: cadence: Use INTX instead of legacy Damien Le Moal
2023-11-22 6:18 ` Christoph Hellwig
2023-11-22 6:03 ` [PATCH v4 09/16] PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() Damien Le Moal
2023-11-22 6:18 ` Christoph Hellwig
2023-11-22 13:38 ` Serge Semin
2023-11-22 6:04 ` [PATCH v4 10/16] PCI: keystone: Use INTX instead of legacy Damien Le Moal
2023-11-22 6:18 ` Christoph Hellwig
2023-11-22 6:04 ` [PATCH v4 11/16] PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() Damien Le Moal
2023-11-22 6:18 ` Christoph Hellwig
2023-11-22 6:04 ` [PATCH v4 12/16] PCI: tegra194: Use INTX instead of legacy Damien Le Moal
2023-11-22 6:18 ` Christoph Hellwig
2023-11-22 6:04 ` Damien Le Moal [this message]
2023-11-22 6:19 ` [PATCH v4 13/16] PCI: uniphier: " Christoph Hellwig
2023-11-22 6:04 ` [PATCH v4 14/16] PCI: rockchip-ep: " Damien Le Moal
2023-11-22 6:19 ` Christoph Hellwig
2023-11-22 6:04 ` [PATCH v4 15/16] PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() Damien Le Moal
2023-11-22 6:21 ` Christoph Hellwig
2023-11-22 6:04 ` [PATCH v4 16/16] PCI: xilinx-nwl: Use INTX instead of legacy Damien Le Moal
2023-11-22 6:21 ` Christoph Hellwig
2023-11-30 8:30 ` [PATCH v4 00/16] Cleanup IRQ type definitions Damien Le Moal
2023-11-30 8:40 ` Manivannan Sadhasivami
2023-12-01 0:52 ` Bjorn Helgaas
2023-12-18 10:10 ` Damien Le Moal
2023-12-18 15:54 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231122060406.14695-14-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=bhelgaas@google.com \
--cc=fancer.lancer@gmail.com \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox