From: Frank Li <Frank.Li@nxp.com>
To: manivannan.sadhasivam@linaro.org
Cc: Frank.Li@nxp.com, bhelgaas@google.com, conor+dt@kernel.org,
devicetree@vger.kernel.org, festevam@gmail.com,
helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev,
kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org,
krzysztof.kozlowski@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, lpieralisi@kernel.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Fri, 19 Jan 2024 12:11:13 -0500 [thread overview]
Message-ID: <20240119171122.3057511-8-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240119171122.3057511-1-Frank.Li@nxp.com>
Add drvdata::mode_off and drvdata::mode_mask to simplify
imx6_pcie_configure_type() logic.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Notes:
Chagne from v8 to v9
- add Manivannan's review tag
Change from v7 to v8
- replace simple with simplify
- remove reduntant comments about FILED_PREP
Change from v3 to v7
- none
Change from v2 to v3
- none
Change from v1 to v2
- use ffs() to fixe build error.
Change from v2 to v3
- none
Change from v1 to v2
- use ffs() to fixe build error.
drivers/pci/controller/dwc/pci-imx6.c | 59 ++++++++++++++++++---------
1 file changed, 39 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d19fcb54fde0d..8df07b71c93e5 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -68,6 +68,7 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_MAX_CLKS 6
+#define IMX6_PCIE_MAX_INSTANCES 2
struct imx6_pcie_drvdata {
enum imx6_pcie_variants variant;
enum dw_pcie_device_mode mode;
@@ -78,6 +79,8 @@ struct imx6_pcie_drvdata {
const u32 clks_cnt;
const u32 ltssm_off;
const u32 ltssm_mask;
+ const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
+ const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
};
struct imx6_pcie {
@@ -174,32 +177,24 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
{
- unsigned int mask, val, mode;
+ const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
+ unsigned int mask, val, mode, id;
- if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
+ if (drvdata->mode == DW_PCIE_EP_TYPE)
mode = PCI_EXP_TYPE_ENDPOINT;
else
mode = PCI_EXP_TYPE_ROOT_PORT;
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MQ:
- case IMX8MQ_EP:
- if (imx6_pcie->controller_id == 1) {
- mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
- val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
- mode);
- } else {
- mask = IMX6Q_GPR12_DEVICE_TYPE;
- val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
- }
- break;
- default:
- mask = IMX6Q_GPR12_DEVICE_TYPE;
- val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
- break;
- }
+ id = imx6_pcie->controller_id;
+
+ /* If mode_mask[id] is zero, means each controller have its individual gpr */
+ if (!drvdata->mode_mask[id])
+ id = 0;
+
+ mask = drvdata->mode_mask[id];
+ val = mode << (ffs(mask) - 1);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
}
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
@@ -1385,6 +1380,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx6q_clks),
.ltssm_off = IOMUXC_GPR12,
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX6SX] = {
.variant = IMX6SX,
@@ -1396,6 +1393,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx6sx_clks),
.ltssm_off = IOMUXC_GPR12,
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX6QP] = {
.variant = IMX6QP,
@@ -1408,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx6q_clks),
.ltssm_off = IOMUXC_GPR12,
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX7D] = {
.variant = IMX7D,
@@ -1417,6 +1418,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx7d-iomuxc-gpr",
.clk_names = imx6q_clks,
.clks_cnt = ARRAY_SIZE(imx6q_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX8MQ] = {
.variant = IMX8MQ,
@@ -1425,6 +1428,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mq-iomuxc-gpr",
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .mode_off[1] = IOMUXC_GPR12,
+ .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
},
[IMX8MM] = {
.variant = IMX8MM,
@@ -1434,6 +1441,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX8MP] = {
.variant = IMX8MP,
@@ -1443,6 +1452,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX8MQ_EP] = {
.variant = IMX8MQ_EP,
@@ -1452,6 +1463,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mq-iomuxc-gpr",
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .mode_off[1] = IOMUXC_GPR12,
+ .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
@@ -1460,6 +1475,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
@@ -1468,6 +1485,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
+ .mode_off[0] = IOMUXC_GPR12,
+ .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
},
};
--
2.34.1
next prev parent reply other threads:[~2024-01-19 17:12 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-19 17:11 [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-01-19 17:11 ` [PATCH v9 01/16] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-01-19 17:11 ` [PATCH v9 02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-01-19 17:11 ` [PATCH v9 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-01-19 17:11 ` [PATCH v9 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2024-01-19 17:11 ` [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2024-02-02 12:12 ` Lorenzo Pieralisi
2024-02-02 13:25 ` Frank Li
2024-02-02 18:53 ` Lorenzo Pieralisi
2024-02-05 17:41 ` Frank Li
2024-02-02 21:54 ` Bjorn Helgaas
2024-02-02 22:22 ` Frank Li
2024-02-02 22:51 ` Bjorn Helgaas
2024-02-03 1:01 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-01-19 17:11 ` Frank Li [this message]
2024-02-13 10:57 ` [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Lorenzo Pieralisi
2024-01-19 17:11 ` [PATCH v9 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-01-19 17:11 ` [PATCH v9 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-01-19 17:11 ` [PATCH v9 10/16] dt-bindings: imx6q-pcie: Restruct reg and reg-name Frank Li
2024-01-23 20:36 ` Rob Herring
2024-01-19 17:11 ` [PATCH v9 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-01-19 17:11 ` [PATCH v9 12/16] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-01-19 17:11 ` [PATCH v9 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2024-01-19 17:11 ` [PATCH v9 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-01-19 17:11 ` [PATCH v9 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-01-19 17:11 ` [PATCH v9 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support Frank Li
2024-02-13 10:38 ` Lorenzo Pieralisi
2024-02-13 13:23 ` Robin Murphy
2024-02-13 15:35 ` Frank Li
2024-01-25 15:31 ` [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-02-01 19:34 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240119171122.3057511-8-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox