From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com>,
Matthew W Carlis <mattc@purestorage.com>,
Keith Busch <kbusch@kernel.org>, Lukas Wunner <lukas@wunner.de>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v2 2/3] PCI/DPC: Remove CONFIG_PCIE_EDR
Date: Thu, 22 Feb 2024 16:15:20 -0600 [thread overview]
Message-ID: <20240222221521.32159-3-helgaas@kernel.org> (raw)
In-Reply-To: <20240222221521.32159-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
Previous Kconfig allowed the possibility of enabling CONFIG_PCIE_DPC
without CONFIG_PCIE_EDR. The PCI Firmware Spec, r3.3, sec 4.5.1,
table 4-5, says an ACPI OS that requests control of DPC must also
advertise support for EDR.
Remove CONFIG_PCIE_EDR and enable the EDR code with CONFIG_PCIE_DPC so that
enabling DPC also enables EDR for ACPI systems. Since EDR is an ACPI
feature, build edr.o only when CONFIG_ACPI is enabled. Stubs cover the
case when DPC is enabled without ACPI.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/acpi/pci_root.c | 2 +-
drivers/pci/pcie/Kconfig | 14 ++++----------
drivers/pci/pcie/Makefile | 5 ++++-
drivers/pci/pcie/dpc.c | 10 ----------
include/linux/pci-acpi.h | 4 ++--
5 files changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index efc292b6214e..bcaf3d3a5e05 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -448,7 +448,7 @@ static u32 calculate_support(void)
support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
if (pci_msi_enabled())
support |= OSC_PCI_MSI_SUPPORT;
- if (IS_ENABLED(CONFIG_PCIE_EDR))
+ if (IS_ENABLED(CONFIG_PCIE_DPC)) /* DPC => EDR support */
support |= OSC_PCI_EDR_SUPPORT;
return support;
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 8999fcebde6a..21e98289fbe9 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -137,6 +137,10 @@ config PCIE_DPC
have this capability or you do not want to use this feature,
it is safe to answer N.
+ On ACPI systems, this includes Error Disconnect Recover support,
+ the hybrid model that uses both firmware and OS to implement DPC,
+ as specified in the PCI Firmware Specification r3.3.
+
config PCIE_PTM
bool "PCI Express Precision Time Measurement support"
help
@@ -145,13 +149,3 @@ config PCIE_PTM
This is only useful if you have devices that support PTM, but it
is safe to enable even if you don't.
-
-config PCIE_EDR
- bool "PCI Express Error Disconnect Recover support"
- depends on PCIE_DPC && ACPI
- help
- This option adds Error Disconnect Recover support as specified
- in the Downstream Port Containment Related Enhancements ECN to
- the PCI Firmware Specification r3.2. Enable this if you want to
- support hybrid DPC model which uses both firmware and OS to
- implement DPC.
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 8de4ed5f98f1..72657f780c33 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -12,4 +12,7 @@ obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
obj-$(CONFIG_PCIE_DPC) += dpc.o
obj-$(CONFIG_PCIE_PTM) += ptm.o
-obj-$(CONFIG_PCIE_EDR) += edr.o
+
+ifdef CONFIG_ACPI
+obj-$(CONFIG_PCIE_DPC) += edr.o
+endif
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 94111e438241..0aa79581250b 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -102,19 +102,9 @@ static bool dpc_completed(struct pci_dev *pdev)
*/
bool pci_dpc_recovered(struct pci_dev *pdev)
{
- struct pci_host_bridge *host;
-
if (!pdev->dpc_cap)
return false;
- /*
- * Synchronization between hotplug and DPC is not supported
- * if DPC is owned by firmware and EDR is not enabled.
- */
- host = pci_find_host_bridge(pdev->bus);
- if (!host->native_dpc && !IS_ENABLED(CONFIG_PCIE_EDR))
- return false;
-
/*
* Need a timeout in case DPC never completes due to failure of
* dpc_wait_rp_inactive(). The spec doesn't mandate a time limit,
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 078225b514d4..92e196ba0249 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -122,13 +122,13 @@ extern const guid_t pci_acpi_dsm_guid;
#define DSM_PCI_POWER_ON_RESET_DELAY 0x08
#define DSM_PCI_DEVICE_READINESS_DURATIONS 0x09
-#ifdef CONFIG_PCIE_EDR
+#ifdef CONFIG_PCIE_DPC
void pci_acpi_add_edr_notifier(struct pci_dev *pdev);
void pci_acpi_remove_edr_notifier(struct pci_dev *pdev);
#else
static inline void pci_acpi_add_edr_notifier(struct pci_dev *pdev) { }
static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { }
-#endif /* CONFIG_PCIE_EDR */
+#endif /* CONFIG_PCIE_DPC */
int pci_acpi_set_companion_lookup_hook(struct acpi_device *(*func)(struct pci_dev *));
void pci_acpi_clear_companion_lookup_hook(void);
--
2.34.1
next prev parent reply other threads:[~2024-02-22 22:15 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 22:15 [PATCH v2 0/3] PCI/DPC: Clean up DPC vs AER/EDR ownership and Kconfig Bjorn Helgaas
2024-02-22 22:15 ` [PATCH v2 1/3] PCI/DPC: Request DPC only if also requesting AER Bjorn Helgaas
2024-02-25 19:46 ` Kuppuswamy Sathyanarayanan
2024-02-26 15:18 ` Bjorn Helgaas
2024-02-26 15:46 ` Kuppuswamy Sathyanarayanan
2024-02-26 16:33 ` Bjorn Helgaas
2024-02-26 16:50 ` Kuppuswamy Sathyanarayanan
2024-02-22 22:15 ` Bjorn Helgaas [this message]
2024-02-25 20:05 ` [PATCH v2 2/3] PCI/DPC: Remove CONFIG_PCIE_EDR Kuppuswamy Sathyanarayanan
2024-03-01 23:06 ` Bjorn Helgaas
2024-03-02 6:42 ` Kuppuswamy Sathyanarayanan
2024-02-22 22:15 ` [PATCH v2 3/3] PCI/DPC: Encapsulate pci_acpi_add_edr_notifier() Bjorn Helgaas
2024-02-25 20:06 ` Kuppuswamy Sathyanarayanan
2024-02-26 15:25 ` Bjorn Helgaas
2024-02-27 6:18 ` [PATCH v2 0/3] PCI/DPC: Clean up DPC vs AER/EDR ownership and Kconfig Ethan Zhao
2024-02-27 6:35 ` Kuppuswamy Sathyanarayanan
2024-02-27 7:12 ` Ethan Zhao
2024-02-29 0:00 ` Kuppuswamy Sathyanarayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240222221521.32159-3-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=jesse.brandeburg@intel.com \
--cc=kbusch@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mattc@purestorage.com \
--cc=mika.westerberg@linux.intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).