From: Frank Li <Frank.Li@nxp.com>
To: "Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>
Cc: linux-pci@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, bpf@vger.kernel.org,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 5/6] PCI: imx: Simplify switch-case logic by involve core_reset callback
Date: Tue, 27 Feb 2024 16:47:12 -0500 [thread overview]
Message-ID: <20240227-pci2_upstream-v1-5-b952f8333606@nxp.com> (raw)
In-Reply-To: <20240227-pci2_upstream-v1-0-b952f8333606@nxp.com>
Instead of using the switch case statement to assert/dassert the core reset
handled by this driver itself, let's introduce a new callback core_reset()
and define it for platforms that require it. This simplifies the code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx.c | 131 ++++++++++++++++++-----------------
1 file changed, 68 insertions(+), 63 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx.c b/drivers/pci/controller/dwc/pci-imx.c
index a63ce171ede8f..460d40115935b 100644
--- a/drivers/pci/controller/dwc/pci-imx.c
+++ b/drivers/pci/controller/dwc/pci-imx.c
@@ -104,6 +104,7 @@ struct imx_pcie_drvdata {
const struct pci_epc_features *epc_features;
int (*init_phy)(struct imx_pcie *pcie);
int (*set_ref_clk)(struct imx_pcie *pcie, bool enable);
+ int (*core_reset)(struct imx_pcie *pcie, bool assert);
};
struct imx_pcie {
@@ -671,35 +672,72 @@ static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie)
clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
}
+static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+ assert ? IMX6SX_GPR12_PCIE_TEST_POWERDOWN : 0);
+ /* Force PCIe PHY reset */
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET,
+ assert ? IMX6SX_GPR5_PCIE_BTNRST_RESET : 0);
+ return 0;
+}
+
+static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST,
+ assert ? IMX6Q_GPR1_PCIE_SW_RST : 0);
+ if (!assert)
+ usleep_range(200, 500);
+
+ return 0;
+}
+
+static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD,
+ assert ? IMX6Q_GPR1_PCIE_TEST_PD : 0);
+
+ regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN,
+ assert ? 0 : IMX6Q_GPR1_PCIE_REF_CLK_EN);
+
+ return 0;
+}
+
+static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
+{
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+
+ if (assert)
+ return 0;
+
+ /*
+ * Workaround for ERR010728, failure of PCI-e PLL VCO to oscillate, especially when cold.
+ * This turns off "Duty-cycle Corrector" and other mysterious undocumented things.
+ */
+
+ if (likely(imx_pcie->phy_base)) {
+ /* De-assert DCC_FB_EN */
+ writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
+ /* Assert RX_EQS and RX_EQS_SEL */
+ writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL | PCIE_PHY_CMN_REG24_RX_EQ,
+ imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
+ /* Assert ATT_MODE */
+ writel(PCIE_PHY_CMN_REG26_ATT_MODE, imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
+ } else {
+ dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
+ }
+ imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
+ return 0;
+}
+
static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
{
reset_control_assert(imx_pcie->pciephy_reset);
reset_control_assert(imx_pcie->apps_reset);
- switch (imx_pcie->drvdata->variant) {
- case IMX6SX:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
- IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
- /* Force PCIe PHY reset */
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
- IMX6SX_GPR5_PCIE_BTNRST_RESET,
- IMX6SX_GPR5_PCIE_BTNRST_RESET);
- break;
- case IMX6QP:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_SW_RST,
- IMX6Q_GPR1_PCIE_SW_RST);
- break;
- case IMX6Q:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
- break;
- default:
- break;
- }
+ if (imx_pcie->drvdata->core_reset)
+ imx_pcie->drvdata->core_reset(imx_pcie, true);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx_pcie->reset_gpio))
@@ -709,47 +747,10 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
{
- struct dw_pcie *pci = imx_pcie->pci;
- struct device *dev = pci->dev;
-
reset_control_deassert(imx_pcie->pciephy_reset);
- switch (imx_pcie->drvdata->variant) {
- case IMX7D:
- /* Workaround for ERR010728, failure of PCI-e PLL VCO to
- * oscillate, especially when cold. This turns off "Duty-cycle
- * Corrector" and other mysterious undocumented things.
- */
- if (likely(imx_pcie->phy_base)) {
- /* De-assert DCC_FB_EN */
- writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
- /* Assert RX_EQS and RX_EQS_SEL */
- writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
- | PCIE_PHY_CMN_REG24_RX_EQ,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
- /* Assert ATT_MODE */
- writel(PCIE_PHY_CMN_REG26_ATT_MODE,
- imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
- } else {
- dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
- }
-
- imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
- break;
- case IMX6SX:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
- IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
- break;
- case IMX6QP:
- regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_SW_RST, 0);
-
- usleep_range(200, 500);
- break;
- default:
- break;
- }
+ if (imx_pcie->drvdata->core_reset)
+ imx_pcie->drvdata->core_reset(imx_pcie, false);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx_pcie->reset_gpio)) {
@@ -1444,6 +1445,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
.set_ref_clk = imx6q_pcie_set_ref_clk,
+ .core_reset = imx6q_pcie_core_reset,
},
[IMX6SX] = {
.variant = IMX6SX,
@@ -1459,6 +1461,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx6sx_pcie_init_phy,
.set_ref_clk = imx6sx_pcie_set_ref_clk,
+ .core_reset = imx6sx_pcie_core_reset,
},
[IMX6QP] = {
.variant = IMX6QP,
@@ -1475,6 +1478,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx_pcie_init_phy,
.set_ref_clk = imx6q_pcie_set_ref_clk,
+ .core_reset = imx6qp_pcie_core_reset,
},
[IMX7D] = {
.variant = IMX7D,
@@ -1488,6 +1492,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.init_phy = imx7d_pcie_init_phy,
.set_ref_clk = imx7d_pcie_set_ref_clk,
+ .core_reset = imx7d_pcie_core_reset,
},
[IMX8MQ] = {
.variant = IMX8MQ,
--
2.34.1
next prev parent reply other threads:[~2024-02-27 21:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-27 21:47 [PATCH 0/6] PCI: imx6: rename\clean up and add lut information for imx95 Frank Li
2024-02-27 21:47 ` [PATCH 1/6] PCI: imx6: Rename imx6_* with imx_* Frank Li
2024-02-28 23:14 ` Fabio Estevam
2024-02-28 23:31 ` Frank Li
2024-02-27 21:47 ` [PATCH 2/6] PCI: imx6: Rename pci-imx6.c and PCI_IMX6 config Frank Li
2024-02-28 23:05 ` Bjorn Helgaas
2024-02-28 23:36 ` Frank Li
2024-02-29 7:29 ` Ahmad Fatoum
2024-03-01 7:16 ` kernel test robot
2024-02-27 21:47 ` [PATCH 3/6] MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file Frank Li
2024-02-27 21:47 ` [PATCH 4/6] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback Frank Li
2024-02-27 21:47 ` Frank Li [this message]
2024-02-27 21:47 ` [PATCH 6/6] PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95 Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240227-pci2_upstream-v1-5-b952f8333606@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=bpf@vger.kernel.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).