linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Jian-Hong Pan <jhp@endlessos.org>
Cc: "Johan Hovold" <johan@kernel.org>,
	"David Box" <david.e.box@linux.intel.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Kuppuswamy Sathyanarayanan"
	<sathyanarayanan.kuppuswamy@linux.intel.com>,
	"Mika Westerberg" <mika.westerberg@linux.intel.com>,
	"Damien Le Moal" <dlemoal@kernel.org>,
	"Nirmal Patel" <nirmal.patel@linux.intel.com>,
	"Jonathan Derrick" <jonathan.derrick@linux.dev>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux@endlessos.org
Subject: Re: [PATCH v4 2/3] PCI/ASPM: Add notes about enabling PCI-PM L1SS to pci_enable_link_state(_locked)
Date: Fri, 1 Mar 2024 15:26:14 -0600	[thread overview]
Message-ID: <20240301212614.GA408494@bhelgaas> (raw)
In-Reply-To: <20240216062559.247479-3-jhp@endlessos.org>

In subject:

  PCI/ASPM: Document D0 requirement when enabling PCI-PM L1 PM Substates

On Fri, Feb 16, 2024 at 02:26:01PM +0800, Jian-Hong Pan wrote:
> According to PCI Express Base Specification Revision 6.0, Section 5.5.4:
> "If setting either or both of the enable bits for PCI-PM L1 PM Substates,
> both ports must be configured as described in this section while in D0."

"PCIe r6.0, sec 5.5.4" is enough.

> Add notes into pci_enable_link_state(_locked) for kernel-doc.

  Add note about D0 requirement in pci_enable_link_state() kernel-doc.

> Hope these
> notify callers ensuring the devices in D0, if PCI-PM L1 PM Substates are
> going to be enabled.

Skip this part.

> Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>

With above updates,

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
> v3:
> - Fix as readable comments
> 
> v4:
> - The same
> 
>  drivers/pci/pcie/aspm.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index 7f1d674ff171..a39d2ee744cb 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -1416,6 +1416,9 @@ static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
>   * touch the LNKCTL register. Also note that this does not enable states
>   * disabled by pci_disable_link_state(). Return 0 or a negative errno.
>   *
> + * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per
> + * PCIe r6.0, sec 5.5.4.
> + *
>   * @pdev: PCI device
>   * @state: Mask of ASPM link states to enable
>   */
> @@ -1432,6 +1435,9 @@ EXPORT_SYMBOL(pci_enable_link_state);
>   * can't touch the LNKCTL register. Also note that this does not enable states
>   * disabled by pci_disable_link_state(). Return 0 or a negative errno.
>   *
> + * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per
> + * PCIe r6.0, sec 5.5.4.
> + *
>   * @pdev: PCI device
>   * @state: Mask of ASPM link states to enable
>   *
> -- 
> 2.43.2
> 

  reply	other threads:[~2024-03-01 21:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-16  6:26 [PATCH v4 2/3] PCI/ASPM: Add notes about enabling PCI-PM L1SS to pci_enable_link_state(_locked) Jian-Hong Pan
2024-03-01 21:26 ` Bjorn Helgaas [this message]
2024-03-02  6:33 ` Kuppuswamy Sathyanarayanan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240301212614.GA408494@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=david.e.box@linux.intel.com \
    --cc=dlemoal@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jhp@endlessos.org \
    --cc=johan@kernel.org \
    --cc=jonathan.derrick@linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@endlessos.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=nirmal.patel@linux.intel.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).