Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Mario Limonciello <mario.limonciello@amd.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Eric Heintzmann <heintzmann.eric@free.fr>
Subject: Re: [PATCH] PCI: Add a quirk for preventing D3 on a bridge
Date: Wed, 10 Apr 2024 11:46:39 -0500	[thread overview]
Message-ID: <20240410164639.GA2145972@bhelgaas> (raw)
In-Reply-To: <20240307163709.323-1-mario.limonciello@amd.com>

On Thu, Mar 07, 2024 at 10:37:09AM -0600, Mario Limonciello wrote:
> Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
> system with a muxless AMD Radeon dGPU.  Attempting to use the dGPU fails
> with the following sequence:
> 
> ```
> ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
> radeon 0000:01:00.0: not ready 1023ms after resume; waiting
> radeon 0000:01:00.0: not ready 2047ms after resume; waiting
> radeon 0000:01:00.0: not ready 4095ms after resume; waiting
> radeon 0000:01:00.0: not ready 8191ms after resume; waiting
> radeon 0000:01:00.0: not ready 16383ms after resume; waiting
> radeon 0000:01:00.0: not ready 32767ms after resume; waiting
> radeon 0000:01:00.0: not ready 65535ms after resume; giving up
> radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
> radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
> ```
> 
> The issue is that the root port the dGPU is connected to can't handle
> the transition from D3cold to D0 so the dGPU can't properly exit runpm.
> 
> The existing logic in pci_bridge_d3_possible() checks for systems that
> are newer than 2015 to decide that D3 is safe.  This would nominally work
> for an Ivy Bridge system (which was discontinued in 2015), but this system
> appears to have continued to receive BIOS updates until 2017 and so this
> existing logic doesn't appropriately capture it.
> 
> Add the system to bridge_d3_blacklist to prevent port pm from being used.
> 
> Reported-and-tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

Applied to pci/pm for v6.10, thanks!

> ---
>  drivers/pci/pci.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index c3585229c12a..9d5d08a420f1 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3102,6 +3102,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
>  			DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
>  		},
>  	},
> +	{
> +		/*
> +		 * Changing power state of root port dGPU is connected fails
> +		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
> +		 */
> +		.ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
> +			DMI_MATCH(DMI_BOARD_NAME, "1972"),
> +			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
> +		},
> +	},
>  #endif
>  	{ }
>  };
> -- 
> 2.34.1
> 

      parent reply	other threads:[~2024-04-10 16:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-07 16:37 [PATCH] PCI: Add a quirk for preventing D3 on a bridge Mario Limonciello
2024-04-10 16:13 ` Mario Limonciello
2024-04-10 16:46 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240410164639.GA2145972@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=heintzmann.eric@free.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox