[PATCH] dt-bindings: PCI: qcom,pcie-sc7280: specify eight interrupts

[Rayyan Ansari <rayyan.ansari@linaro.org>]

In the previous commit to this binding,

commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")

the binding was changed to specify one interrupt, as the device tree at
that moment in time did not describe the hardware fully.

The device tree for sc7280 now specifies eight interrupts, due to

commit b8ba66b40da3 ("arm64: dts: qcom: sc7280: Add additional MSI interrupts")

As a result, change the bindings to reflect this.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-sc7280.yaml  | 24 ++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 634da24ec3ed..5cf1f9165301 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -53,11 +53,19 @@ properties:
       - const: aggre1 # Aggre NoC PCIe1 AXI clock
 
   interrupts:
-    maxItems: 1
+    minItems: 8
+    maxItems: 8
 
   interrupt-names:
     items:
-      - const: msi
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
 
   resets:
     maxItems: 1
@@ -137,8 +145,16 @@ examples:
 
             dma-coherent;
 
-            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "msi";
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,

---
base-commit: 73399b58e5e5a1b28a04baf42e321cfcfc663c2f
change-id: 20240718-sc7280-pcie-interrupts-6d34650d9bb2

Best regards,
-- 
Rayyan Ansari <rayyan.ansari@linaro.org>