[PATCH] PCI: j721e: Set .map_irq and .swizzle_irq to NULL

[Siddharth Vadapalli <s-vadapalli@ti.com>]

Since the configuration of Legacy Interrupts (INTx) is not supported, set
the .map_irq and .swizzle_irq callbacks to NULL. This fixes the error:
  of_irq_parse_pci: failed with rc=-22
due to the absence of Legacy Interrupts in the device-tree.

Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---

Hello,

This patch is based on commit
786c8248dbd3 Merge tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
of Mainline Linux.

Patch has been tested on J784S4-EVM and J721e-EVM, both of which have
the PCIe Controller configured by the pci-j721e.c driver.

Regards,
Siddharth.

 drivers/pci/controller/cadence/pci-j721e.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 85718246016b..5372218849a8 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -417,6 +417,10 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		if (!bridge)
 			return -ENOMEM;
 
+		/* Legacy interrupts are not supported */
+		bridge->map_irq = NULL;
+		bridge->swizzle_irq = NULL;
+
 		if (!data->byte_access_allowed)
 			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
-- 
2.40.1