From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Jim Quinlan <james.quinlan@broadcom.com>
Cc: linux-pci@vger.kernel.org,
"Nicolas Saenz Julienne" <nsaenz@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Cyril Brulebois" <kibi@debian.org>,
"Stanimir Varbanov" <svarbanov@suse.de>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-rpi-kernel@lists.infradead.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 11/12] PCI: brcmstb: Change field name from 'type' to 'model'
Date: Thu, 25 Jul 2024 10:28:10 +0530 [thread overview]
Message-ID: <20240725045810.GK2317@thinkpad> (raw)
In-Reply-To: <20240716213131.6036-12-james.quinlan@broadcom.com>
On Tue, Jul 16, 2024 at 05:31:26PM -0400, Jim Quinlan wrote:
> The 'type' field used in the driver to discern SoC differences is confusing
> so change it to the more apt 'model'. We considered using 'family' but
> this conflicts with Broadcom's conception of a family; for example, 7216a0
> and 7216b0 chips are both considered separate families as each has multiple
> derivative product chips based on the original design.
>
TBH, 'model' is also confusing :) Why can't you just use 'soc' as you are
referrring to the SoC name.
- Mani
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 42 +++++++++++++--------------
> 1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 2fe1f2a26697..fa5616a56383 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -211,7 +211,7 @@ enum {
> PCIE_INTR2_CPU_BASE,
> };
>
> -enum pcie_type {
> +enum pcie_model {
> GENERIC,
> BCM7425,
> BCM7435,
> @@ -229,7 +229,7 @@ struct rc_bar {
>
> struct pcie_cfg_data {
> const int *offsets;
> - const enum pcie_type type;
> + const enum pcie_model model;
> const bool has_phy;
> unsigned int num_inbound;
> int (*perst_set)(struct brcm_pcie *pcie, u32 val);
> @@ -270,7 +270,7 @@ struct brcm_pcie {
> u64 msi_target_addr;
> struct brcm_msi *msi;
> const int *reg_offsets;
> - enum pcie_type type;
> + enum pcie_model model;
> struct reset_control *rescal;
> struct reset_control *perst_reset;
> struct reset_control *bridge;
> @@ -288,7 +288,7 @@ struct brcm_pcie {
>
> static inline bool is_bmips(const struct brcm_pcie *pcie)
> {
> - return pcie->type == BCM7435 || pcie->type == BCM7425;
> + return pcie->model == BCM7435 || pcie->model == BCM7425;
> }
>
> /*
> @@ -852,7 +852,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> * security considerations, and is not implemented in our modern
> * SoCs.
> */
> - if (pcie->type != BCM7712)
> + if (pcie->model != BCM7712)
> set_bar(b++, &n, 0, 0, 0);
>
> resource_list_for_each_entry(entry, &bridge->dma_ranges) {
> @@ -869,7 +869,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> * That being said, each BARs size must still be a power of
> * two.
> */
> - if (pcie->type == BCM7712)
> + if (pcie->model == BCM7712)
> set_bar(b++, &n, size, cpu_beg, pcie_beg);
>
> if (n > pcie->num_inbound)
> @@ -886,7 +886,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
> * that enables multiple memory controllers. As such, it can return
> * now w/o doing special configuration.
> */
> - if (pcie->type == BCM7712)
> + if (pcie->model == BCM7712)
> return n;
>
> ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
> @@ -1008,7 +1008,7 @@ static void set_inbound_win_registers(struct brcm_pcie *pcie, const struct rc_ba
> * 7712:
> * All of their BARs need to be set.
> */
> - if (pcie->type == BCM7712) {
> + if (pcie->model == BCM7712) {
> /* BUS remap register settings */
> reg_offset = brcm_ubus_reg_offset(i);
> tmp = lower_32_bits(cpu_addr) & ~0xfff;
> @@ -1036,7 +1036,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
> return ret;
>
> /* Ensure that PERST# is asserted; some bootloaders may deassert it. */
> - if (pcie->type == BCM2711) {
> + if (pcie->model == BCM2711) {
> ret = pcie->perst_set(pcie, 1);
> if (ret) {
> pcie->bridge_sw_init_set(pcie, 0);
> @@ -1067,9 +1067,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
> */
> if (is_bmips(pcie))
> burst = 0x1; /* 256 bytes */
> - else if (pcie->type == BCM2711)
> + else if (pcie->model == BCM2711)
> burst = 0x0; /* 128 bytes */
> - else if (pcie->type == BCM7278)
> + else if (pcie->model == BCM7278)
> burst = 0x3; /* 512 bytes */
> else
> burst = 0x2; /* 512 bytes */
> @@ -1666,7 +1666,7 @@ static const int pcie_offsets_bmips_7425[] = {
>
> static const struct pcie_cfg_data generic_cfg = {
> .offsets = pcie_offsets,
> - .type = GENERIC,
> + .model = GENERIC,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> .num_inbound = 3,
> @@ -1674,7 +1674,7 @@ static const struct pcie_cfg_data generic_cfg = {
>
> static const struct pcie_cfg_data bcm7425_cfg = {
> .offsets = pcie_offsets_bmips_7425,
> - .type = BCM7425,
> + .model = BCM7425,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> .num_inbound = 3,
> @@ -1682,7 +1682,7 @@ static const struct pcie_cfg_data bcm7425_cfg = {
>
> static const struct pcie_cfg_data bcm7435_cfg = {
> .offsets = pcie_offsets,
> - .type = BCM7435,
> + .model = BCM7435,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> .num_inbound = 3,
> @@ -1690,7 +1690,7 @@ static const struct pcie_cfg_data bcm7435_cfg = {
>
> static const struct pcie_cfg_data bcm4908_cfg = {
> .offsets = pcie_offsets,
> - .type = BCM4908,
> + .model = BCM4908,
> .perst_set = brcm_pcie_perst_set_4908,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> .num_inbound = 3,
> @@ -1706,7 +1706,7 @@ static const int pcie_offset_bcm7278[] = {
>
> static const struct pcie_cfg_data bcm7278_cfg = {
> .offsets = pcie_offset_bcm7278,
> - .type = BCM7278,
> + .model = BCM7278,
> .perst_set = brcm_pcie_perst_set_7278,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> .num_inbound = 3,
> @@ -1714,7 +1714,7 @@ static const struct pcie_cfg_data bcm7278_cfg = {
>
> static const struct pcie_cfg_data bcm2711_cfg = {
> .offsets = pcie_offsets,
> - .type = BCM2711,
> + .model = BCM2711,
> .perst_set = brcm_pcie_perst_set_generic,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> .num_inbound = 3,
> @@ -1722,7 +1722,7 @@ static const struct pcie_cfg_data bcm2711_cfg = {
>
> static const struct pcie_cfg_data bcm7216_cfg = {
> .offsets = pcie_offset_bcm7278,
> - .type = BCM7278,
> + .model = BCM7278,
> .perst_set = brcm_pcie_perst_set_7278,
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> .has_phy = true,
> @@ -1779,7 +1779,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> pcie->dev = &pdev->dev;
> pcie->np = np;
> pcie->reg_offsets = data->offsets;
> - pcie->type = data->type;
> + pcie->model = data->model;
> pcie->perst_set = data->perst_set;
> pcie->bridge_sw_init_set = data->bridge_sw_init_set;
> pcie->has_phy = data->has_phy;
> @@ -1848,7 +1848,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> goto fail;
>
> pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
> - if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
> + if (pcie->model == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
> dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
> ret = -ENODEV;
> goto fail;
> @@ -1863,7 +1863,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> }
> }
>
> - bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
> + bridge->ops = pcie->model == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
> bridge->sysdata = pcie;
>
> platform_set_drvdata(pdev, pcie);
> --
> 2.17.1
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2024-07-25 4:58 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-16 21:31 [PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 01/12] dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC Jim Quinlan
2024-07-17 6:51 ` Krzysztof Kozlowski
2024-07-17 13:20 ` Jim Quinlan
2024-07-17 13:30 ` Krzysztof Kozlowski
2024-07-23 18:49 ` Jim Quinlan
2024-07-17 21:06 ` Florian Fainelli
2024-07-18 6:02 ` Krzysztof Kozlowski
2024-07-18 6:07 ` Krzysztof Kozlowski
2024-07-23 18:44 ` Jim Quinlan
2024-07-24 8:05 ` Krzysztof Kozlowski
2024-07-24 18:57 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 02/12] dt-bindings: PCI: brcmstb: Add 7712 SoC description Jim Quinlan
2024-07-17 6:52 ` Krzysztof Kozlowski
2024-07-23 21:03 ` Jim Quinlan
2024-07-24 6:02 ` Krzysztof Kozlowski
2024-07-16 21:31 ` [PATCH v4 03/12] PCI: brcmstb: Use common error handling code in brcm_pcie_probe() Jim Quinlan
2024-07-25 4:31 ` Manivannan Sadhasivam
2024-07-25 19:45 ` Jim Quinlan
2024-07-26 5:04 ` Manivannan Sadhasivam
2024-07-26 18:34 ` Jim Quinlan
2024-07-27 6:40 ` Manivannan Sadhasivam
2024-07-29 15:24 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 04/12] PCI: brcmstb: Use bridge reset if available Jim Quinlan
2024-07-25 4:37 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 05/12] PCI: brcmstb: Use swinit " Jim Quinlan
2024-07-25 4:39 ` Manivannan Sadhasivam
2024-07-29 21:49 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 06/12] PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific Jim Quinlan
2024-07-25 4:43 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 07/12] PCI: brcmstb: Remove two unused constants from driver Jim Quinlan
2024-07-25 4:43 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 08/12] PCI: brcmstb: Don't conflate the reset rescal with phy ctrl Jim Quinlan
2024-07-25 4:48 ` Manivannan Sadhasivam
2024-07-26 19:03 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 09/12] PCI: brcmstb: Refactor for chips with many regular inbound BARs Jim Quinlan
2024-07-25 4:53 ` Manivannan Sadhasivam
2024-07-25 20:29 ` Jim Quinlan
2024-07-26 5:08 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 10/12] PCI: brcmstb: Check return value of all reset_control_xxx calls Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 11/12] PCI: brcmstb: Change field name from 'type' to 'model' Jim Quinlan
2024-07-25 4:58 ` Manivannan Sadhasivam [this message]
2024-07-25 20:38 ` Jim Quinlan
2024-07-26 11:29 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 12/12] PCI: brcmstb: Enable 7712 SOCs Jim Quinlan
2024-07-25 4:59 ` Manivannan Sadhasivam
2024-07-25 5:03 ` [PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240725045810.GK2317@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=james.quinlan@broadcom.com \
--cc=jim2101024@gmail.com \
--cc=kibi@debian.org \
--cc=krzk@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lpieralisi@kernel.org \
--cc=nsaenz@kernel.org \
--cc=robh@kernel.org \
--cc=svarbanov@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).