Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Tariq Toukan <tariqt@nvidia.com>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Eric Dumazet <edumazet@google.com>
Cc: <netdev@vger.kernel.org>, Saeed Mahameed <saeedm@nvidia.com>,
	Gal Pressman <gal@nvidia.com>,
	Leon Romanovsky <leonro@nvidia.com>,
	John Stultz <jstultz@google.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	"Anna-Maria Behnsen" <anna-maria@linutronix.de>,
	Frederic Weisbecker <frederic@kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>, <linux-pci@vger.kernel.org>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>, <x86@kernel.org>,
	Carolina Jubran <cjubran@nvidia.com>,
	Bar Shapira <bshapira@nvidia.com>,
	Rahul Rameshbabu <rrameshbabu@nvidia.com>,
	Tariq Toukan <tariqt@nvidia.com>
Subject: [PATCH net-next V3 3/3] net/mlx5: Implement PTM cross timestamping support
Date: Tue, 30 Jul 2024 16:40:54 +0300	[thread overview]
Message-ID: <20240730134055.1835261-4-tariqt@nvidia.com> (raw)
In-Reply-To: <20240730134055.1835261-1-tariqt@nvidia.com>

From: Rahul Rameshbabu <rrameshbabu@nvidia.com>

Expose Precision Time Measurement support through related PTP ioctl.

The performance of PTM on ConnectX-7 was evaluated using both real-time
(RTC) and free-running (FRC) clocks under traffic and no traffic
conditions. Tests with phc2sys measured the maximum offset values at a 50Hz
rate, with and without PTM. 

Results:

1. No traffic
+-----+--------+--------+
|     | No-PTM | PTM    |
+-----+--------+--------+
| FRC | 125 ns | <29 ns |
+-----+--------+--------+
| RTC | 248 ns | <34 ns |
+-----+--------+--------+

2. With traffic
+-----+--------+--------+
|     | No-PTM | PTM    |
+-----+--------+--------+
| FRC | 254 ns | <40 ns |
+-----+--------+--------+
| RTC | 255 ns | <45 ns |
+-----+--------+--------+

Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Co-developed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/lib/clock.c   | 91 +++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
index 0361741632a6..b306ae79bf97 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
@@ -38,6 +38,10 @@
 #include "lib/eq.h"
 #include "en.h"
 #include "clock.h"
+#ifdef CONFIG_X86
+#include <linux/timekeeping.h>
+#include <linux/cpufeature.h>
+#endif /* CONFIG_X86 */
 
 enum {
 	MLX5_PIN_MODE_IN		= 0x0,
@@ -148,6 +152,87 @@ static int mlx5_set_mtutc(struct mlx5_core_dev *dev, u32 *mtutc, u32 size)
 				    MLX5_REG_MTUTC, 0, 1);
 }
 
+#ifdef CONFIG_X86
+static bool mlx5_is_ptm_source_time_available(struct mlx5_core_dev *dev)
+{
+	u32 out[MLX5_ST_SZ_DW(mtptm_reg)] = {0};
+	u32 in[MLX5_ST_SZ_DW(mtptm_reg)] = {0};
+	int err;
+
+	if (!MLX5_CAP_MCAM_REG3(dev, mtptm))
+		return false;
+
+	err = mlx5_core_access_reg(dev, in, sizeof(in), out, sizeof(out), MLX5_REG_MTPTM,
+				   0, 0);
+	if (err)
+		return false;
+
+	return !!MLX5_GET(mtptm_reg, out, psta);
+}
+
+static int mlx5_mtctr_syncdevicetime(ktime_t *device_time,
+				     struct system_counterval_t *sys_counterval,
+				     void *ctx)
+{
+	u32 out[MLX5_ST_SZ_DW(mtctr_reg)] = {0};
+	u32 in[MLX5_ST_SZ_DW(mtctr_reg)] = {0};
+	struct mlx5_core_dev *mdev = ctx;
+	bool real_time_mode;
+	u64 host, device;
+	int err;
+
+	real_time_mode = mlx5_real_time_mode(mdev);
+
+	MLX5_SET(mtctr_reg, in, first_clock_timestamp_request,
+		 MLX5_MTCTR_REQUEST_PTM_ROOT_CLOCK);
+	MLX5_SET(mtctr_reg, in, second_clock_timestamp_request,
+		 real_time_mode ? MLX5_MTCTR_REQUEST_REAL_TIME_CLOCK :
+		 MLX5_MTCTR_REQUEST_FREE_RUNNING_COUNTER);
+
+	err = mlx5_core_access_reg(mdev, in, sizeof(in), out, sizeof(out), MLX5_REG_MTCTR,
+				   0, 0);
+	if (err)
+		return err;
+
+	if (!MLX5_GET(mtctr_reg, out, first_clock_valid) ||
+	    !MLX5_GET(mtctr_reg, out, second_clock_valid))
+		return -EINVAL;
+
+	host = MLX5_GET64(mtctr_reg, out, first_clock_timestamp);
+	*sys_counterval = (struct system_counterval_t) {
+			.cycles = host,
+			.cs_id = CSID_X86_ART,
+			.use_nsecs = true,
+	};
+
+	device = MLX5_GET64(mtctr_reg, out, second_clock_timestamp);
+	if (real_time_mode)
+		*device_time = ns_to_ktime(REAL_TIME_TO_NS(device >> 32, device & U32_MAX));
+	else
+		*device_time = mlx5_timecounter_cyc2time(&mdev->clock, device);
+
+	return 0;
+}
+
+static int mlx5_ptp_getcrosststamp(struct ptp_clock_info *ptp,
+				   struct system_device_crosststamp *cts)
+{
+	struct mlx5_clock *clock = container_of(ptp, struct mlx5_clock, ptp_info);
+	struct system_time_snapshot history_begin = {0};
+	struct mlx5_core_dev *mdev;
+
+	mdev = container_of(clock, struct mlx5_core_dev, clock);
+
+	if (!mlx5_is_ptm_source_time_available(mdev))
+		return -EBUSY;
+
+	ktime_get_snapshot(&history_begin);
+
+	return get_device_system_crosststamp(mlx5_mtctr_syncdevicetime, mdev,
+					     &history_begin, cts);
+}
+#endif /* CONFIG_X86 */
+
 static u64 mlx5_read_time(struct mlx5_core_dev *dev,
 			  struct ptp_system_timestamp *sts,
 			  bool real_time)
@@ -1034,6 +1119,12 @@ static void mlx5_init_timer_clock(struct mlx5_core_dev *mdev)
 	if (MLX5_CAP_MCAM_REG(mdev, mtutc))
 		mlx5_init_timer_max_freq_adjustment(mdev);
 
+#ifdef CONFIG_X86
+	if (MLX5_CAP_MCAM_REG3(mdev, mtptm) &&
+	    MLX5_CAP_MCAM_REG3(mdev, mtctr) && boot_cpu_has(X86_FEATURE_ART))
+		clock->ptp_info.getcrosststamp = mlx5_ptp_getcrosststamp;
+#endif /* CONFIG_X86 */
+
 	mlx5_timecounter_init(mdev);
 	mlx5_init_clock_info(mdev);
 	mlx5_init_overflow_period(clock);
-- 
2.44.0


  parent reply	other threads:[~2024-07-30 13:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-30 13:40 [PATCH net-next V3 0/3] mlx5 PTM cross timestamping support Tariq Toukan
2024-07-30 13:40 ` [PATCH net-next V3 1/3] net/mlx5: Add support for MTPTM and MTCTR registers Tariq Toukan
2024-07-31 12:47   ` Wojciech Drewek
2024-07-30 13:40 ` [PATCH net-next V3 2/3] net/mlx5: Add support for enabling PTM PCI capability Tariq Toukan
2024-07-31 12:50   ` Wojciech Drewek
2024-07-30 13:40 ` Tariq Toukan [this message]
2024-07-31 12:59   ` [PATCH net-next V3 3/3] net/mlx5: Implement PTM cross timestamping support Wojciech Drewek
2024-07-31 13:26 ` [PATCH net-next V3 0/3] mlx5 " Vadim Fedorenko
2024-08-05 23:54 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240730134055.1835261-4-tariqt@nvidia.com \
    --to=tariqt@nvidia.com \
    --cc=anna-maria@linutronix.de \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=bshapira@nvidia.com \
    --cc=cjubran@nvidia.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=frederic@kernel.org \
    --cc=gal@nvidia.com \
    --cc=jstultz@google.com \
    --cc=kuba@kernel.org \
    --cc=leonro@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rrameshbabu@nvidia.com \
    --cc=saeedm@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox