From: Bjorn Helgaas <helgaas@kernel.org>
To: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
linux-pci@vger.kernel.org
Subject: Re: [PATCH 6/6] drm/i915/pm: Use pci_dev->skip_bus_pm for hibernate vs. D3 workaround
Date: Wed, 25 Sep 2024 14:28:56 -0500 [thread overview]
Message-ID: <20240925192856.GA10650@bhelgaas> (raw)
In-Reply-To: <20240925144526.2482-7-ville.syrjala@linux.intel.com>
On Wed, Sep 25, 2024 at 05:45:26PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> On some older laptops we have to leave the device in D0
> during hibernation, or else the BIOS just hangs and never
> finishes the hibernation.
>
> Currently we are achieving that by skipping the
> pci_set_power_state(D3). However we also need to call
> pci_save_state() ahead of time, or else
> pci_pm_suspend_noirq() will do the pci_set_power_state(D3)
> anyway.
>
> This is all rather ugly, and might cause us to deviate from
> standard pci pm behaviour in unknown ways since we always
> call pci_save_state() for any kind of suspend operation.
>
> Stop calling pci_save_state()+pci_set_power_state() entirely
> (apart from the switcheroo paths) and instead set
> pci_dev->skip_bus_pm=true to prevent the D3 during hibernation
> on old machines. Apart from that we'll just let the normal
> pci pm code take care of everything for us.
>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Cc: linux-pci@vger.kernel.org
> Cc: intel-gfx@lists.freedesktop.org
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_driver.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
> index c3e7225ea1ba..05948d00a874 100644
> --- a/drivers/gpu/drm/i915/i915_driver.c
> +++ b/drivers/gpu/drm/i915/i915_driver.c
> @@ -1123,13 +1123,9 @@ static int i915_drm_suspend_noirq(struct drm_device *dev, bool hibernation)
> * Lenovo Thinkpad X301, X61s, X60, T60, X41
> * Fujitsu FSC S7110
> * Acer Aspire 1830T
> - *
> - * pci_save_state() is needed to prevent driver/pci from
> - * automagically putting the device into D3.
> */
> - pci_save_state(pdev);
> - if (!(hibernation && GRAPHICS_VER(dev_priv) < 6))
> - pci_set_power_state(pdev, PCI_D3hot);
> + if (hibernation && GRAPHICS_VER(dev_priv) < 6)
> + pdev->skip_bus_pm = true;
.skip_bus_pm was previously strictly internal to
drivers/pci/pci-driver.c. Not sure about using it outside
drivers/pci/; would want Rafael to chime in.
> return 0;
> }
> @@ -1137,6 +1133,7 @@ static int i915_drm_suspend_noirq(struct drm_device *dev, bool hibernation)
> int i915_driver_suspend_switcheroo(struct drm_i915_private *i915,
> pm_message_t state)
> {
> + struct pci_dev *pdev = to_pci_dev(i915->drm.dev);
> int error;
>
> if (drm_WARN_ON_ONCE(&i915->drm, state.event != PM_EVENT_SUSPEND &&
> @@ -1158,6 +1155,9 @@ int i915_driver_suspend_switcheroo(struct drm_i915_private *i915,
> if (error)
> return error;
>
> + pci_save_state(pdev);
> + pci_set_power_state(pdev, PCI_D3hot);
> +
> return 0;
> }
>
> --
> 2.44.2
>
prev parent reply other threads:[~2024-09-25 19:28 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-25 14:45 [PATCH 0/6] drm/i915/pm: Clean up the hibernate vs. PCI D3 quirk Ville Syrjala
2024-09-25 14:45 ` [PATCH 1/6] PCI/PM: Respect pci_dev->skip_bus_pm in the .poweroff() path Ville Syrjala
2024-09-25 19:28 ` Bjorn Helgaas
2024-09-26 16:03 ` Ville Syrjälä
2024-09-30 19:50 ` Bjorn Helgaas
2024-10-01 13:12 ` Ville Syrjälä
2024-10-23 15:31 ` Ville Syrjälä
2024-09-25 14:45 ` [PATCH 2/6] drm/i915/pm: Hoist pci_save_state()+pci_set_power_state() to the end of pm _late() hook Ville Syrjala
2024-09-26 14:43 ` Rodrigo Vivi
2024-09-26 15:41 ` Ville Syrjälä
2024-09-26 16:40 ` Rodrigo Vivi
2024-09-25 14:45 ` [PATCH 3/6] drm/i915/pm: Simplify pm hook documentation Ville Syrjala
2024-09-26 14:45 ` Rodrigo Vivi
2024-09-26 15:38 ` Ville Syrjälä
2024-09-26 16:10 ` Rodrigo Vivi
2024-09-25 14:45 ` [PATCH 4/6] drm/i915/pm: Move the hibernate+D3 quirk stuff into noirq() pm hooks Ville Syrjala
2024-09-25 19:28 ` Bjorn Helgaas
2024-09-25 14:45 ` [PATCH 5/6] drm/i915/pm: Do pci_restore_state() in switcheroo resume hook Ville Syrjala
2024-09-26 14:48 ` Rodrigo Vivi
2024-09-26 15:36 ` Ville Syrjälä
2024-09-26 16:27 ` Rodrigo Vivi
2024-09-25 14:45 ` [PATCH 6/6] drm/i915/pm: Use pci_dev->skip_bus_pm for hibernate vs. D3 workaround Ville Syrjala
2024-09-25 19:28 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240925192856.GA10650@bhelgaas \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-pci@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).