From: Frank Li <Frank.Li@nxp.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
"Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
Frank.li@nxp.com, alyssa@rosenzweig.io, bpf@vger.kernel.org,
broonie@kernel.org, jgg@ziepe.ca, joro@8bytes.org,
l.stach@pengutronix.de, lgirdwood@gmail.com, maz@kernel.org,
p.zabel@pengutronix.de, robin.murphy@arm.com, will@kernel.org,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
Date: Thu, 26 Sep 2024 18:07:48 -0400 [thread overview]
Message-ID: <20240926-imx95_lut-v1-2-d0c62087dbab@nxp.com> (raw)
In-Reply-To: <20240926-imx95_lut-v1-0-d0c62087dbab@nxp.com>
For the i.MX95, configuration of a LUT is necessary to convert Bus Device
Function (BDF) to stream IDs, which are utilized by both IOMMU and ITS.
This involves examining the msi-map and smmu-map to ensure consistent
mapping of PCI BDF to the same stream IDs. Subsequently, LUT-related
registers are configured. In the absence of an msi-map, the built-in MSI
controller is utilized as a fallback.
Additionally, register a PCI bus callback function enable_device() and
disable_device() to config LUT when enable a new PCI device.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 133 +++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 94f3411352bf0..1fe07f64d0d88 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -55,6 +55,22 @@
#define IMX95_PE0_GEN_CTRL_3 0x1058
#define IMX95_PCIE_LTSSM_EN BIT(0)
+#define IMX95_PE0_LUT_ACSCTRL 0x1008
+#define IMX95_PEO_LUT_RWA BIT(16)
+#define IMX95_PE0_LUT_ENLOC GENMASK(4, 0)
+
+#define IMX95_PE0_LUT_DATA1 0x100c
+#define IMX95_PE0_LUT_VLD BIT(31)
+#define IMX95_PE0_LUT_DAC_ID GENMASK(10, 8)
+#define IMX95_PE0_LUT_STREAM_ID GENMASK(5, 0)
+
+#define IMX95_PE0_LUT_DATA2 0x1010
+#define IMX95_PE0_LUT_REQID GENMASK(31, 16)
+#define IMX95_PE0_LUT_MASK GENMASK(15, 0)
+
+#define IMX95_SID_MASK GENMASK(5, 0)
+#define IMX95_MAX_LUT 32
+
#define to_imx_pcie(x) dev_get_drvdata((x)->dev)
enum imx_pcie_variants {
@@ -82,6 +98,7 @@ enum imx_pcie_variants {
#define IMX_PCIE_FLAG_HAS_PHY_RESET BIT(5)
#define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
#define IMX_PCIE_FLAG_SUPPORT_64BIT BIT(7)
+#define IMX_PCIE_FLAG_HAS_LUT BIT(8)
#define imx_check_flag(pci, val) (pci->drvdata->flags & val)
@@ -134,6 +151,7 @@ struct imx_pcie {
struct device *pd_pcie_phy;
struct phy *phy;
const struct imx_pcie_drvdata *drvdata;
+ struct mutex lock;
};
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -925,6 +943,111 @@ static void imx_pcie_stop_link(struct dw_pcie *pci)
imx_pcie_ltssm_disable(dev);
}
+static int imx_pcie_add_lut(struct imx_pcie *imx_pcie, u16 reqid, u8 sid)
+{
+ struct dw_pcie *pci = imx_pcie->pci;
+ struct device *dev = pci->dev;
+ u32 data1, data2;
+ int i;
+
+ if (sid >= 64) {
+ dev_err(dev, "Invalid SID for index %d\n", sid);
+ return -EINVAL;
+ }
+
+ guard(mutex)(&imx_pcie->lock);
+
+ for (i = 0; i < IMX95_MAX_LUT; i++) {
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, IMX95_PEO_LUT_RWA | i);
+
+ regmap_read(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, &data1);
+ if (data1 & IMX95_PE0_LUT_VLD)
+ continue;
+
+ data1 = FIELD_PREP(IMX95_PE0_LUT_DAC_ID, 0);
+ data1 |= FIELD_PREP(IMX95_PE0_LUT_STREAM_ID, sid);
+ data1 |= IMX95_PE0_LUT_VLD;
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1);
+
+ data2 = 0xffff;
+ data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, reqid);
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2);
+
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, i);
+
+ return 0;
+ }
+
+ dev_err(dev, "All lut already used\n");
+ return -EINVAL;
+}
+
+static void imx_pcie_remove_lut(struct imx_pcie *imx_pcie, u16 reqid)
+{
+ u32 data2 = 0;
+ int i;
+
+ guard(mutex)(&imx_pcie->lock);
+
+ for (i = 0; i < IMX95_MAX_LUT; i++) {
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, IMX95_PEO_LUT_RWA | i);
+
+ regmap_read(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, &data2);
+ if (FIELD_GET(IMX95_PE0_LUT_REQID, data2) == reqid) {
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, 0);
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, 0);
+ regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, i);
+ }
+ }
+}
+
+static int imx_pcie_enable_device(struct pci_bus *bus, struct pci_dev *pdev)
+{
+ u32 sid_i = 0, sid_m = 0, rid = pci_dev_id(pdev);
+ struct imx_pcie *imx_pcie;
+ struct device *dev;
+ int err;
+
+ imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bus->sysdata));
+ dev = imx_pcie->pci->dev;
+
+ err = of_map_id(dev->of_node, rid, "iommu-map", "iommu-map-mask", NULL, &sid_i);
+ if (err)
+ return err;
+
+ err = of_map_id(dev->of_node, rid, "msi-map", "msi-map-mask", NULL, &sid_m);
+ if (err)
+ return err;
+
+ if (sid_i != rid && sid_m != rid)
+ if ((sid_i & IMX95_SID_MASK) != (sid_m & IMX95_SID_MASK)) {
+ dev_err(dev, "its and iommu stream id miss match, please check dts file\n");
+ return -EINVAL;
+ }
+
+ /* if iommu-map is not existed then use msi-map's stream id*/
+ if (sid_i == rid)
+ sid_i = sid_m;
+
+ sid_i &= IMX95_SID_MASK;
+
+ if (sid_i != rid)
+ return imx_pcie_add_lut(imx_pcie, rid, sid_i);
+
+ /* Use dwc built-in MSI controller */
+ return 0;
+}
+
+static void imx_pcie_disable_device(struct pci_bus *bus, struct pci_dev *pdev)
+{
+ struct imx_pcie *imx_pcie;
+
+ imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bus->sysdata));
+ imx_pcie_remove_lut(imx_pcie, pci_dev_id(pdev));
+}
+
static int imx_pcie_host_init(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -941,6 +1064,11 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
}
}
+ if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
+ pp->bridge->ops->enable_device = imx_pcie_enable_device;
+ pp->bridge->ops->disable_device = imx_pcie_disable_device;
+ }
+
imx_pcie_assert_core_reset(imx_pcie);
if (imx_pcie->drvdata->init_phy)
@@ -1292,6 +1420,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
imx_pcie->pci = pci;
imx_pcie->drvdata = of_device_get_match_data(dev);
+ mutex_init(&imx_pcie->lock);
+
/* Find the PHY if one is defined, only imx7d uses it */
np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
if (np) {
@@ -1587,7 +1717,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
},
[IMX95] = {
.variant = IMX95,
- .flags = IMX_PCIE_FLAG_HAS_SERDES,
+ .flags = IMX_PCIE_FLAG_HAS_SERDES |
+ IMX_PCIE_FLAG_HAS_LUT,
.clk_names = imx8mq_clks,
.clks_cnt = ARRAY_SIZE(imx8mq_clks),
.ltssm_off = IMX95_PE0_GEN_CTRL_3,
--
2.34.1
prev parent reply other threads:[~2024-09-26 22:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-26 22:07 [PATCH 0/2] PCI: add enabe(disable)_device() hook for bridge Frank Li
2024-09-26 22:07 ` [PATCH 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges Frank Li
2024-09-28 0:07 ` Bjorn Helgaas
2024-09-26 22:07 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240926-imx95_lut-v1-2-d0c62087dbab@nxp.com \
--to=frank.li@nxp.com \
--cc=alyssa@rosenzweig.io \
--cc=bhelgaas@google.com \
--cc=bpf@vger.kernel.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).